A 10kg block with an area of 0.2 m^2 slides down a plane inclined at 20 degrees. If it slides on a 0.1 mm gap of SAE 10 oil at 85°F, find its terminal velocity.
Added by Eric C.
Close
Step 1
The gravitational force can be calculated using the formula: F_gravity = m * g where m is the mass of the block and g is the acceleration due to gravity. In this case, the mass of the block is given as 10 kg, and the acceleration due to gravity is approximately Show more…
Show all steps
Your feedback will help us improve your experience
Vivek K and 63 other Physics 101 Mechanics educators are ready to help you.
Ask a new question
Labs
Want to see this concept in action?
Explore this concept interactively to see how it behaves as you change inputs.
Key Concepts
Recommended Videos
A 10 -kg block slides down a smooth inclined surface as shown in Fig. $P 1.80 .$ Determine the terminal velocity of the block if the 0.1 -mm gap between the block and the surface contains SAE 30 oil at $60^{\circ} \mathrm{F}$. Assume the velocity distribution in the gap is linear, and the area of the block in contact with the oil is $0.1 \mathrm{m}^{2}$.
A block $0.1 \mathrm{m}$ square, with $5 \mathrm{kg}$ mass, slides down a smooth incline, $30^{\circ}$ below the horizontal, on a film of SAE 30 oil at $20^{\circ} \mathrm{C}$ that is $0.20 \mathrm{mm}$ thick. If the block is released from rest at $t=0,$ what is its initial acceleration? Derive an expression for the speed of the block as a function of time. Plot the curve for $V(t)$. Find the speed after 0.1 s. If we want the mass to instead reach a speed of $0.3 \mathrm{m} / \mathrm{s}$ at this time, find the viscosity $\mu$ of the oil we would have to use.
A block slides down a lubricated inclined plane as show in the figure below. The lubricant is a thin film of SAE 10W oil with thickness h = 0.1 mm and temperature of 20C. The block has a density of 2000kg/m3 and cube is measuring 0.2 m on each side. What is the maximum angle that the plane can be inclined at if the terminal velocity of the block is not to exceed 1.0 m/s? Liquid film of thickness h W Block contact area A V θ
Keerti J.
Recommended Textbooks
University Physics with Modern Physics
Physics: Principles with Applications
Fundamentals of Physics
Watch the video solution with this free unlock.
EMAIL
PASSWORD