Draw Zener regulator circuit to obtain regulated DC voltage 6.8 V. Considering input DC voltage in the range from 10V to 30V. Consider load resistance of 10kΩ.
Added by Gary O.
Step 1
First, we need a Zener diode with a breakdown voltage of 6.8V. This will be the main component of our regulator circuit. Show more…
Show all steps
Close
Your feedback will help us improve your experience
Adi S and 68 other Physics 102 Electricity and Magnetism educators are ready to help you.
Ask a new question
Labs
Want to see this concept in action?
Explore this concept interactively to see how it behaves as you change inputs.
Key Concepts
Recommended Videos
A 7.2 V Zener is used in the circuit shown in Fig. 3 and the load current is to vary from 12 to 100 mA. Find the value of series resistance R to maintain a voltage of 7.2 V across the load. The input voltage is constant at 12V and the minimum Zener current is 10 mA.
Adi S.
Sketch the diagram of a circuit that contains a $5-\Omega$ resistor, a $10-V$ voltage source, and a voltage-controlled voltage source having a gain constant of $0.5 \mathrm{V} / \mathrm{V}$, Assume that the voltage across the resistor is the control voltage for the controlled source. Place all three elements in series. Several answers are possible, depending on the polarities chosen for the sources and the control voltage.
'A (10 V) stabilized power supply is required to be produced from a (25 V) DC power supply input source, when (Pz = 5 W) then the maximum current flowing through the zener diode will be equal to 300 mA 0.5 mA 200 mA 500 mA'
Penny R.
Recommended Textbooks
University Physics with Modern Physics
Physics: Principles with Applications
Fundamentals of Physics
Transcript
Watch the video solution with this free unlock.
EMAIL
PASSWORD