Show that the cycle efficiency is given by: \begin{equation} \eta = 1 - \frac{1}{r^{\gamma - 1}} \left[ \frac{\rho^{\gamma} - 1}{\rho - 1} \right] \end{equation} where $r = \frac{V_1}{V_2}$ and $\rho = \frac{V_3}{V_2}$
Added by Diego R.
Close
Step 1
The efficiency of a diesel cycle is given by the formula: n = 1 - (1 / r^(γ-1)) where r is the compression ratio and γ is the specific heat ratio. Show more…
Show all steps
Your feedback will help us improve your experience
Adi S and 91 other Physics 101 Mechanics educators are ready to help you.
Ask a new question
Labs
Want to see this concept in action?
Explore this concept interactively to see how it behaves as you change inputs.
Key Concepts
Recommended Videos
Show that the thermal efficiency of an ideal Diesel cycle is given by η = 1 - (1/rc^(γ-1)) * [(re^γ - 1) / (γ(re - 1))] where the ratio rc = V1/V2 is called the compression ratio and the ratio re = V3/V2 is called the expansion ratio for a diesel engine. The compression ratio of a diesel engine is much larger than that of a gasoline engine because there is no preignition as only air is being compressed. Take rc = 20, re = 4, and calculate the thermal efficiency.
Adi S.
Determine the air standard efficiency of an engine operating on the diesel cycle when the suction pressure is 99.7 kPa and the fuel is injected for 6% of the stroke; the clearance volume is 8% of the stroke. Assume k = 1.4. (60%)
Adriano C.
The theoretical efficiency of an Otto cycle is $63 \%$. The ratio of the $C_{p}$ and $C_{V}$ heat capacities for the gas in the engine is $\frac{7}{5}$. (a) What is the compression ratio $r$ ? (b) If the net work done per cycle is $12.6 \mathrm{~kJ},$ how much heat is rejected and how much is absorbed by the engine during each cycle?
Recommended Textbooks
University Physics with Modern Physics
Physics: Principles with Applications
Fundamentals of Physics
Transcript
Watch the video solution with this free unlock.
EMAIL
PASSWORD