Question

Lab 1-Control multiple LEDs with Arduino UNO Question 1 Sketch the schematic diagram in your lab report where 8 LEDs and 8 resistors are connected to the Arduino UNO port D2 to D9. In this lab, you are required to write an Arduino C code for the following specification: (A) Pattern Display For the 8 LEDs connected to the Arduino, you are required to program the Arduino UNO board to display the following patterns in sequence with delay: First pattern : 10101010 Delay : 0.5 second Second pattern : 11110000 Delay : 1 second Third pattern : 00001111 Delay : 0.5 second Fourth Pattern: 01010101 Delay : 1 second The following information must be followed The pattern should be repeating infinitely (void loop). You must be used an individual private sub loop for the program. You must be used an array method or for-loop to complete your solution. (B) Running Light One LED should light up at each time and will continuously move across the LEDs with the interval of 0.5 second from left to right, then from right to left. e.g: 01000000 -> 00100000 -> 00010000 -> 00001000...

          Lab 1-Control multiple LEDs with Arduino UNO
Question 1
Sketch the schematic diagram in your lab report where 8 LEDs and 8 resistors are connected
to the Arduino UNO port D2 to D9.
In this lab, you are required to write an Arduino C code for the following specification:
(A) Pattern Display
For the 8 LEDs connected to the Arduino, you are required to program the
Arduino UNO board to display the following patterns in sequence with delay:
First pattern : 10101010
Delay : 0.5 second
Second pattern : 11110000
Delay : 1 second
Third pattern : 00001111
Delay : 0.5 second
Fourth Pattern: 01010101
Delay : 1 second
The following information must be followed
The pattern should be repeating infinitely (void loop).
You must be used an individual private sub loop for the program.
You must be used an array method or for-loop to complete your
solution.
(B) Running Light
One LED should light up at each time and will continuously move across the
LEDs with the interval of 0.5 second from left to right, then from right to left.
e.g: 01000000 -> 00100000 -> 00010000 -> 00001000...

Lab 1-Control multiple LEDs with Arduino UNO
Question 1
Sketch the schematic diagram in your lab report where 8 LEDs and 8 resistors are connected
to the Arduino UNO port D2 to D9.
In this lab, you are required to write an Arduino C code for the following specification:
(A) Pattern Display
For the 8 LEDs connected to the Arduino, you are required to program the
Arduino UNO board to display the following patterns in sequence with delay:
First pattern : 10101010
Delay : 0.5 second
Second pattern : 11110000
Delay : 1 second
Third pattern : 00001111
Delay : 0.5 second
Fourth Pattern: 01010101
Delay : 1 second
The following information must be followed
The pattern should be repeating infinitely (void loop).
You must be used an individual private sub loop for the program.
You must be used an array method or for-loop to complete your
solution.
(B) Running Light
One LED should light up at each time and will continuously move across the
LEDs with the interval of 0.5 second from left to right, then from right to left.
e.g: 01000000 -> 00100000 -> 00010000 -> 00001000...

Added by Kimberly W.

Question

Please give Ace some feedback