00:01
Often how you tell that there is internal resistance shown in the circuit as a little r in your battery is you can hook the battery up to a load of some sort that's going to provide a current.
00:16
And the voltage that you read on the two terminals of the battery drops from its rated value.
00:24
So here that's what's going on.
00:26
There's a battery made up of the two terminals a and b.
00:31
And it reads 12 volts until you put two bulbs in parallel and then the voltage drops.
00:40
And we would like to find the internal resistance r.
00:45
So the way we'll do that is we will simply figure out the total current that's running through the battery.
00:54
And that current will split up and go through each of the two bulbs in parallel.
01:01
So our first goal will be to work with those bulbs and get them into an equivalent resistance that we can then use and say that the delta vab is equal to the r equivalent from the bulbs times i total.
01:27
Okay, and you might say why am i leaving out the small resistance inside the battery and just focusing on the bulbs.
01:36
And that's because we are using the terminal voltage, which flows across those two parallel resistors.
01:47
So note that point a and point b form the common endpoints of the bulb resistors in parallel.
01:59
Okay, so how do we get the resistance of the bulbs? they are rated at 4 watts at 12 volts, which means that we can use power equals v squared over r for the bulbs, or r is equal to 12 volts squared divided by 4 watts, and that comes out to be 36 oms apiece.
02:29
Now they are in parallel, so we need the 1 over arc parallel, it's equal to 1 over r1...