In a straight turning process of a 24-inch long cylindrical workpiece (ut = of 2 hp.min/in3) with an initial diameter of 6-inch at 0.25-inch depth of cut, 4 in/min feed rate, and 300 rpm rotational speed. Calculate: 3. Spindle torque (lb.ft)
Added by Christina F.
Close
Step 1
The volume of a cylinder can be calculated using the formula V = πr^2h, where V is the volume, r is the radius, and h is the height. Given that the initial diameter is 6 inches and the depth of cut is 0.25 inches, we can calculate the radius of the workpiece Show more…
Show all steps
Your feedback will help us improve your experience
Supreeta N and 88 other Physics 101 Mechanics educators are ready to help you.
Ask a new question
Labs
Want to see this concept in action?
Explore this concept interactively to see how it behaves as you change inputs.
Key Concepts
Recommended Videos
A lathe is set up to machine a taper on a bar stock 120 mm in diameter; the taperis 1 mm per 10 mm. A cut is made with an initial depth of cut of 4 mm at a feedrate of 0.250 mm/rev and at a spindle speed of 150 rpm. Calculate the averagemetal removal rate.
Sanchit J.
$\bullet$ (a) A cylinder 0.150 $\mathrm{m}$ in diameter rotates in a lathe at 620 $\mathrm{rpm} .$ What is the tangential speed of the surface of the cylinder? (b) The proper tangential speed for machining cast iron is about 0.600 $\mathrm{m} / \mathrm{s} .$ At how many revolutions per minute should a piece of stock 0.0800 $\mathrm{m}$ in diameter be rotated in a lathe to produce this tangential speed?
Recommended Textbooks
University Physics with Modern Physics
Physics: Principles with Applications
Fundamentals of Physics
Transcript
Watch the video solution with this free unlock.
EMAIL
PASSWORD