MECHANICS-II, Homework #9 Determine the acceleration of each block when m = 15 kg, μ = 0, and B = 0 m/s. The mass of the pulleys and friction in the system are neglected.
Added by Shane F.
Close
Step 1
First, let's draw a free body diagram for each block. For block A: - There is a tension force T1 acting to the right. - The weight of block A (mg) acts downward. For block B: - There is a tension force T2 acting to the left. - The weight of block B (mg) acts Show more…
Show all steps
Your feedback will help us improve your experience
Deepak Jangra and 68 other Physics 101 Mechanics educators are ready to help you.
Ask a new question
Labs
Want to see this concept in action?
Explore this concept interactively to see how it behaves as you change inputs.
Key Concepts
Recommended Videos
A hanging weight, with a mass of m1 = 0.365 kg, is attached by a string to a block with mass m2 = 0.845 kg as shown in the figure below. The string goes over a pulley with a mass of M = 0.350 kg. The pulley can be modeled as a hollow cylinder with an inner radius of R1 = 0.0200 m, and an outer radius of R2 = 0.0300 m; the mass of the spokes is negligible. As the weight falls, the block slides on the table, and the coefficient of kinetic friction between the block and the table is μk = 0.250. At the instant shown, the block is moving with a velocity of vi = 0.820 m/s toward the pulley. Assume that the pulley is free to spin without friction, that the string does not stretch and does not slip on the pulley, and that the mass of the string is negligible. A pulley of inner radius R1 and outer radius R2 is attached to the corner of a table such that the pulley is diagonal from the corner and the center of the pulley is to the right of the edge. A hanging weight of mass m1 hangs off the side of the table and is suspended by a string that extends over the pulley. The other end of the string is attached to a block of mass m2, which is on the table. An arrow between the block and the pulley points towards the pulley, and an arrow between the pulley and the hanging mass points towards the ground. (a) Using energy methods, find the speed of the block (in m/s) after it has moved a distance of 0.700 m away from the initial position shown. m/s (b) What is the angular speed of the pulley (in rad/s) after the block has moved this distance? rad/s
Shaiju T.
A hanging weight, with a mass of m1 = 0.370 kg, is attached by a string to a block with mass m2 = 0.850 kg as shown in the figure below. The string goes over a pulley with a mass of M = 0.350 kg. The pulley can be modeled as a hollow cylinder with an inner radius of R1 = 0.0200 m, and an outer radius of R2 = 0.0300 m; the mass of the spokes is negligible. As the weight falls, the block slides on the table, and the coefficient of kinetic friction between the block and the table is μk = 0.250. At the instant shown, the block is moving with a velocity of vi = 0.820 m/s toward the pulley. Assume that the pulley is free to spin without friction, that the string does not stretch and does not slip on the pulley, and that the mass of the string is negligible. A pulley of inner radius R1 and outer radius R2 is attached to the corner of a table such that the pulley is diagonal from the corner and the center of the pulley is to the right of the edge. A hanging weight of mass m1 hangs off the side of the table and is suspended by a string that extends over the pulley. The other end of the string is attached to a block of mass m2, which is on the table. An arrow between the block and the pulley points towards the pulley, and an arrow between the pulley and the hanging mass points towards the ground. (a) Using energy methods, find the speed of the block (in m/s) after it has moved a distance of 0.700 m away from the initial position shown. m/s (b) What is the angular speed of the pulley (in rad/s) after the block has moved this distance? rad/s
Suman K.
The velocity of an object is given by the expression v(t) = 3.00 m/s + (4.00 m/s³)/2, where t is in seconds. Determine the position of the object as a function of time if it is located at x = 1.00 m at time t = 0.000 s. A) (4.00 m/s)t B) 1.00 m + (3.00 m/s)t + (1.33 m/s³)t³ C) (3.00 m/s)t + (1.33 m/s³)t³ D) 1.33 m E) (4.00 m/s)t + 1.00 m The velocity of an object as a function of time is given by v(t) = 2.00 m/s + (3.00 m/s) t - (1.0 m/s²) t². Determine the instantaneous acceleration of the object at time t = 3.00 s. A) -3.00 m/s² B) -2.00 m/s² C) 1.00 m/s² D) 0.00 m/s² E) 2.00 m/s² In the pulley system in the figure, the pulleys and the rope are of negligible mass and there is no friction in the axles of the pulleys. If the mass of each block is m, find the acceleration of the weights and the value of the tensile force of the rope. Which object will be lifted and which one will fall? A) a₁ = -1/5 g; a₂ = 2/5 g; T = 3/5 mg B) a₁ = 1/5 g; a₂ = -2/5 g; T = 2/5 mg C) a₁ = 1/5 g; a₂ = -2/5 g; T = 1/5 mg D) a₁ = 2/5 g; a₂ = -3/5 g; T = 1/5 mg E) a₁ = -2/5 g; a₂ = +3/5 g; T = 1/5 mg
Bcrypt_Sha256$$2B$12$We1Wwocamog01O5I.V2Tkouxdh4Ofnmgpwkor7Leaonfpu0Ubfpua B.
Recommended Textbooks
University Physics with Modern Physics
Physics: Principles with Applications
Fundamentals of Physics
18,000,000+
Students on Numerade
Trusted by students at 8,000+ universities
Watch the video solution with this free unlock.
EMAIL
PASSWORD