Question

Required operations: 1. Facing of 1 mm using facemill tool of 40 mm DIAMETER (ET23) 2. Holes depth is 10 mm for all holes, use drill of 8 mm diameter (ET16) 3. Use tool number 3 (ET3) for the pocket, it's depth is 5 mm. 4. For drilling and endmilling, feed is 100 mm/min, rotational speed is 2000 rpm. 5. Use drilling cycle G81 for holes drilling, with R2. Use drill tool number 16 (ET16) Stock size is 50x50x20 mm

          Required operations:
1. Facing of 1 mm using facemill tool of 40 mm DIAMETER (ET23)
2. Holes depth is 10 mm for all holes, use drill of 8 mm diameter (ET16)
3. Use tool number 3 (ET3) for the pocket, it's depth is 5 mm.
4. For drilling and endmilling, feed is 100 mm/min, rotational speed is 2000 rpm.
5. Use drilling cycle G81 for holes drilling, with R2. Use drill tool number 16 (ET16)
Stock size is 50x50x20 mm

Required operations:
1. Facing of 1 mm using facemill tool of 40 mm DIAMETER (ET23)
2. Holes depth is 10 mm for all holes, use drill of 8 mm diameter (ET16)
3. Use tool number 3 (ET3) for the pocket, it's depth is 5 mm.
4. For drilling and endmilling, feed is 100 mm/min, rotational speed is 2000 rpm.
5. Use drilling cycle G81 for holes drilling, with R2. Use drill tool number 16 (ET16)
Stock size is 50x50x20 mm

Added by Shane B.

University Physics with Modern Physics

Hugh D. Young 14th Edition

Instant Answer

Solved by Expert Christopher Dzorkpata

Step 1

Facing of 1mm using facemill tool of 40 mm diameter ET23: To face the material by 1mm, we will use a facemill tool with a diameter of 40mm and an ET23. The facing operation will remove material from the top surface of the workpiece to make it flat and even. Show more…

Show all steps

Thanks for your feedback!

O T O O 30 15 Required operations: 1. Facing of 1mm using facemill tool of 40 mm diameter ET23 2. Holes depth is 10mm for all holes, use drill of 8 mm diameter ET16 3. Use tool number 3 ET3 for the pocket. Its depth is 5mm. 4. For drilling and end milling, feed is 100 mm/min, rotational speed is 2000 rpm. 5. Use drilling cycle GB1 for hole drilling, with R2. Use drill tool number 16 ET16. Stock size is 50x50x20mm.