objective:Design and build a circuit using an Arduino Uno board and at least the other components shown in the image below. The circuit should display the temperature measured by the sensor on the LCD display in both Celsius and Fahrenheit. The color of the GB LED and the position of the servo motor should change based on the temperature readings.Analor Temperature Sensor (NITC)RGB LED"BACARTO ROOSONGSDIGITAL (PHA -)gO UNO13 orARDUINODisplay 16x2Procedure:1. Connect the joy yeags to the Arduino Uno board using the breadboard and jumper wires and other components as needed.2. Write a program that does the following:Reads the temperature from the sensor. Displays the temperature on the LCD screen in both Celsius and Fahrenheit. Changes the color of the GB LEDs and the position of the servo motor based on the temperature:_If the temperature is less than or equal to 23deg C, the GB LED should display green and the servo motor should be at position 0,If the temperature is greater than 23deg C and less than 30deg C, the RB LED should display yellow and the servo motor should be at position 45.* If the temperature is 30deg C or greater, the GB LED should display red and the servo motor should be at position 90.3. Test the circuit.Expected Outcome: The circuit should accurately display the temperature in both Celsius and Fahrenheit on the LCD screen. The GB LEDs should change color and the servo motor should change position based on the temperature readings
Due:Wednesday.8 May 2024.12-30 PM
Objective: Design and build a circuit using an Arduino Uno boi LCD display in both Celsius and Fahrenheit.
cuit should display the temperature measured by the sensor on the
Analog Temperature SensorNTCRGB LED
Servo
OUNO
Display 16x2
Procedure 1.Connect the to the Arduino Uno board using the breadboard and jumper wires and other components as needed 2.Write a program that does the following Reads the temperature from the sensor. o Displays the temperature on the LCD screen in both Celsius and Fahrenheit o Changes the color of the RGBLEDs and the position of the servo motor based on the temperature If the temperature is less than or equal to 23Cthe RGB LED should display green and the servo motor should be at position 0. if the temperature is greater than23C and less than 30C.the RGB LED should display yellow and the servo motor should be at position 45 if the temperature is30Corgreater,the RGB LED should display red and the servo motor should be at position 90 3.Test the circuit Expected Outcome The circuit should accurately display the temperature in both Celsius and Fahrenheit on the LCD screen.The RGB LEDs should change color and the servo motor should change position based on the temperaturereading
Upload to eclass
JPY
? Search