Question

The plastic tube in Fig. 14-30 has a cross-sectional area of $5.00 \mathrm{~cm}^{2}$. The tube is filled with water until the short arm (of length $d=0.800 \mathrm{~m}$ ) is full. Then the short arm is sealed and more water is gradually poured into the long arm. If the seal will pop off when the force on it exceeds $9.80 \mathrm{~N}$, what total height of water in the long arm will put the seal on the verge of popping?

Name: The plastic tube in Fig. 14-30 has a cross-sectional area of 5.00 cm^2. The tube is filled with water until the short arm (of length d=0.800 m ) is full. Then the short arm is sealed and more water is gradually poured into the long arm. If the seal will pop off when the force on it exceeds 9.80 N, what total height of water in the long arm will put the seal on the verge of popping?
Uploaded: 2023-06-16T21:29:53-08:00
Duration: 2 min 50 s
Channel: Prabhu Ramji
Description: The plastic tube in Fig. 14-30 has a cross-sectional area of 5.00 cm^2. The tube is filled with water until the short arm (of length d=0.800 m ) is full. Then the short arm is sealed and more water is gradually poured into the long arm. If the seal will pop off when the force on it exceeds 9.80 N, what total height of water in the long arm will put the seal on the verge of popping?

          The plastic tube in Fig. 14-30 has a cross-sectional area of $5.00 \mathrm{~cm}^{2}$. The tube is filled with water until the short arm (of length $d=0.800 \mathrm{~m}$ ) is full. Then the short arm is sealed and more water is gradually poured into the long arm. If the seal will pop off when the force on it exceeds $9.80 \mathrm{~N}$, what total height of water in the long arm will put the seal on the verge of popping?

Added by Robin J.

University Physics with Modern Physics

Hugh D. Young 14th Edition

Instant Answer

Solved by Expert Prabhu Ramji

06/16/2023

Step 1

First, we need to find the weight of the water in the short arm. We can use the formula: $W = mg$ where $m$ is the mass of the water and $g$ is the acceleration due to gravity. Since the density of water is 1 g/cm$^3$, the mass of the water in the short arm Show more…

Show all steps

Thanks for your feedback!

The plastic tube in Fig. 14-30 has a cross-sectional area of $5.00 \mathrm{~cm}^{2}$. The tube is filled with water until the short arm (of length $d=0.800 \mathrm{~m}$ ) is full. Then the short arm is sealed and more water is gradually poured into the long arm. If the seal will pop off when the force on it exceeds $9.80 \mathrm{~N}$, what total height of water in the long arm will put the seal on the verge of popping?