The surface factor is used to correct for differences in surface finish. Calculate the surface factor for a shaft with a ground surface finish of 45 mm diameter made from steel with an ultimate tensile strength of 1100 MPa that is subjected to bending stress.
Added by Victor L.
Step 1
Determine the bending stress on the shaft. This information is not given in the question, so we cannot proceed without it. Show more…
Show all steps
Your feedback will help us improve your experience
Khoobchandra Agrawal and 73 other Physics 101 Mechanics educators are ready to help you.
Ask a new question
Labs
Want to see this concept in action?
Explore this concept interactively to see how it behaves as you change inputs.
Key Concepts
Recommended Videos
Find the diameter of a shaft made of 37 Mn 2 steel having the ultimate tensile strength as 600 MPa and yield stress as 440 MPa: The shaft is subjected to completely reversed axial load of 200 kN. Neglect stress concentration factor and assume surface finish factor as 0.8. The factor of safety may be taken as 1.5.
Sri K.
2 Find the diameter of a shaft to transmit twisting moments varying from 800 N-m to 1600 Nm. The ultimate tensile strength for the material is 600 MPa and yield stress is 450 MPa. Assume the stress concentration factor = 1.2, surface finish factor = 0.8 and size factor = 0.85
Suman K.
A 100-mm solid shaft is to be replaced with a hollow shaft equal in strength under torsion and made of the same material. The outside diameter of the hollow shaft is to be 125 mm. What should be the inside diameter? The allowable shearing stress is 40 MPa.
Madhur L.
Recommended Textbooks
University Physics with Modern Physics
Physics: Principles with Applications
Fundamentals of Physics
18,000,000+
Students on Numerade
Trusted by students at 8,000+ universities
Watch the video solution with this free unlock.
EMAIL
PASSWORD