00:01
Hello students, there can be multiple reasons for the medium temperature work in cooler assembly not cooling the box properly.
00:12
Some of the important causes can be first in evaporator the moisture from the air could be freezed on the evaporator or cooling coil cooling coil thereby forming a insulation for the heat transfer process.
00:40
So the solution for this problem is that the defrost cycle is present that removes the frozen material due to this the compressor work continuous.
00:50
So because it has the work at a higher differential pressure that is higher differential pressure air flow also decrease as the passage becomes narrow.
01:12
Now next the condenser coil could be placed in the area having low value of air flow to remove heat.
01:23
So this increase the head pressure.
01:29
So the solution for this is the unit should be placed in a well insulated area well insulated area so that this will not happen.
01:42
Next the door gusset of the cooling unit is not sealed properly maybe this happened thereby allowing the escape of cold air from the unit.
01:54
So the solution for this is the proper prevention proper prevention inspection and maintenance and maintenance to check the door gusset should be done.
02:14
Next temperature control setting temperature control setting could have been accidentally changed thereby not rendering proper cooling to check the temperature setting properly check the temperature setting properly...