Two standard 90o elbows with screwed ends are fitted to a 50 mm diameter pipeline with friction factor 0.02. What is the equivalent increase in straight pipe length due to head loss in these bends?
Added by Sylvia P.
Close
Step 1
The equivalent length of an elbow is the length of straight pipe that would cause the same head loss as the elbow. The equivalent length can be calculated using the following formula: Equivalent Length = (K * Diameter) / Friction Factor Where: - K is the loss Show more…
Show all steps
Your feedback will help us improve your experience
Aakash Goyal and 56 other Physics 103 educators are ready to help you.
Ask a new question
Labs
Want to see this concept in action?
Explore this concept interactively to see how it behaves as you change inputs.
Key Concepts
Recommended Videos
Water flows from a larger pipe, diameter $D_{1}=100 \mathrm{mm}$ into a smaller one, diameter $D_{2}=50 \mathrm{mm},$ by way of a reentrant device. Find the head loss between points (1) and (2).
A 100 mm diameter water main is required to discharge at 0.035 m^3/s when running full bore. Calculate the loss of pressure head that occurs in a 150 mm horizontal run of this pipe. Use Darcy's formula and assume a friction coefficient of 0.006 for the pipe.
Adi S.
A pipe of 0.2 m diameter and 50 m length consists of 2 units of 90-degree elbows, a gate valve, a sharp entrance, and a sharp exit. Calculate the pipe's equivalent length and total head loss when the flow rate is 0.2 m^3/s and the valve is fully open. Assume a friction factor of 0.005. (Answer: L1 = 72 m, L2 = 10 m, L3 = 20 m).
Sri K.
Recommended Textbooks
University Physics with Modern Physics
Physics: Principles with Applications
Fundamentals of Physics
18,000,000+
Students on Numerade
Trusted by students at 8,000+ universities
Watch the video solution with this free unlock.
EMAIL
PASSWORD