• Home
  • Textbooks
  • University Physics for JEE Mains and Advance
  • Direct-Current Circuits

University Physics for JEE Mains and Advance

Hugh D. Young

Chapter 6

Direct-Current Circuits - all with Video Answers

Educators


Chapter Questions

03:04

Problem 1

A uniform wire of resistance $R$ is cut into three equal lengths. One of these is formed into a circle and connected between the other two (Fig. E6.1). What is the resistance between the opposite ends $a$ and $b ?$

Shital Rijal
Shital Rijal
Numerade Educator
00:43

Problem 2

A machine part has a resistor $X$ protruding from an opening in the side. This resistor is connected to three other resistors, shown in Fig. E6.2. An ohmmeter connected across $a$ and $b$ reads $2.00 \Omega$. What is the resistance of $X$ ?

Jilin Wang
Jilin Wang
Boston University
03:48

Problem 3

A triangular array of resistors is shown in Fig. E6.3. What current will this array draw from a $35.0-\mathrm{V}$ battery having negligible internal resistance if we connect it across (a) $a b ;$ (b) $b c ;$ (c) $a c$ ?
(d) If the battery has an intemal resistance of $3.00 \Omega$, what current will the array draw if the battery is connected Figure $E$ across $b c$ ?

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
06:27

Problem 4

For the circuit shown in Fig. E6. 4 both meters are idealized, the battery has no appreciable internal resistance, and the ammeter reads $1.25 \mathrm{~A}$. (a) What does the voltmeter read?
(b) What is the emf $\varepsilon$ of the battery?

Vishal Gupta
Vishal Gupta
Numerade Educator
02:27

Problem 5

For the circuit shown in Fig. E6.5 find the reading of the idealized ammeter if the battery has an internal resistance of $3.75 \Omega .$

Melissa Walsh
Melissa Walsh
Numerade Educator
03:26

Problem 6

In Fig. E6.6, $R_{1}=3.00 \Omega$, $R_{2}=6.00 \Omega$, and $R_{3}=5.00 \Omega$.
The battery has negligible internal resistance. The current $I_{2}$ through $R_{2}$ is $4.00 \mathrm{~A}$. (a) What are the currents $I_{1}$ and $I_{3}$ ? (b) What is the emf of the battery?

Shital Rijal
Shital Rijal
Numerade Educator
08:28

Problem 7

In the circuit of Fig. E6.7, each resistor represents a light bulb. Let $R_{1}=$ $R_{2}=R_{3}=R_{4}=4.50 \Omega$ and $\varepsilon=9.00 \mathrm{~V} .$
(a) Find the current in each bulb. (b) Find the power dissipated in each bulb. Which bulb or bulbs glow the brightest? (c) Bulb $R_{4}$ is now removed from the circuit, leaving a break in the wire at its position. Now what is the current in each of the remaining bulbs
(d) With bulb $R_{4}$ removed, what is the power dissi$R_{1}, R_{2}$, and $R_{3} ?$
pated in each of the remaining bulbs? (e) Which light bulb(s) glow brighter as a result of removing $R_{4} ?$ Which bulb(s) glow less brightly? Discuss why there are different effects on different bulbs.

Vishal Gupta
Vishal Gupta
Numerade Educator
02:23

Problem 8

Consider the circuit shown in Fig. E6.8. The current through the $6.00-\Omega$ resistor is $4.00 \mathrm{~A}$, in the direction shown. What are the currents through the $25.0-\Omega$ and $20.0-\Omega$ resistors?

Jilin Wang
Jilin Wang
Boston University
07:20

Problem 9

A Three-Way Light Bulb. A three-way light bulb has three brightness settings (low, medium, and high) but only two filaments. (a) A particular three-way light bulb connected across a $120-\mathrm{V}$ line can dissipate $60 \mathrm{~W}, 120 \mathrm{~W}$, or $180 \mathrm{~W} .$ Describe how the two filaments are arranged in the bulb, and calculate the resistance of each filament.
(b) Suppose the filament with the higher resistance burns out. How much power will the bulb dissipate on each of the three brightness settings? What will be the brightness (low, medium, or high) on each setting? (c) Repeat part (b) for the situation in which the filament with the lower resistance burns out.

Ren Jie Tuieng
Ren Jie Tuieng
Numerade Educator
03:35

Problem 10

Working Late! You are working late in your electronics shop and find that you need various resistors for a project. But alas, all you have is a big box of $10.0-\Omega$ resistors. Show how you can make each of the following equivalent resistances by a combination of your
(d) $7.5 \Omega$. $10.0-\Omega$ resistors: (a) $35 \Omega$, (b) $1.0 \Omega$, (c) $3.33 \Omega$,

Ren Jie Tuieng
Ren Jie Tuieng
Numerade Educator
09:51

Problem 11

In the circuit shown in Fig. E6.11, the rate at which $R_{1}$ is dissipating electrical energy is $20.0 \mathrm{~W}$. (a) Find $R_{1}$ and $R_{2} .$ (b) What is the emf of the battery? (c) Find the current through both $R_{2}$ and the $10.0-\Omega$ resistor.
(d) Calculate the total electrical power consumption in all the resistors and the electrical power delivered by the battery. Show that your results are consistent with conservation of energy.

Vishal Gupta
Vishal Gupta
Numerade Educator
02:41

Problem 12

Light Bulbs in Series. A 60-W, $120-\mathrm{V}$ light bulb and a $200-\mathrm{W}, 120-\mathrm{V}$ light bulb are connected in series across a $240-\mathrm{V}$ line. Assume that the resistance of each bulb does not vary with current. (Note: This description of a light bulb gives the power it dissipates when connected to the stated potential difference; that is, a $25-\mathrm{W}, 120-\mathrm{V}$ light bulb dissipates $25 \mathrm{~W}$ when connected to a
120-V line.) (a) Find the current through the bulbs. (b) Find the power dissipated in each bulb. (c) One bulb burns out very quickly. Which one? Why?

Jilin Wang
Jilin Wang
Boston University
04:47

Problem 13

EP In the circuit in Fig. E6.13, a $20.0-\Omega$ resistor is inside $100 g$ of pure water that is surrounded by insulating styrofoam. If the water is initially at $10.0^{\circ} \mathrm{C}$, how long will it take for its temperature to rise to $58.0^{\circ} \mathrm{C}$ ?

Shital Rijal
Shital Rijal
Numerade Educator
02:29

Problem 14

The batteries shown in the circuit in Fig. E6.14 have negligibly small internal resistances. Find the current through (a) the $30.0-\Omega$ resistor, (b) the $20.0-\Omega$ resistor; (c) the $10.0$-V battery.

Jilin Wang
Jilin Wang
Boston University
02:43

Problem 15

In the circuit shown in Fig. E6.15 find (a) the current in resistor $R ;$ (b) the resistance $R ;$ (c) the unknown emf $\mathcal{E}$. (d) If the circuit is broken at point $x$, what is the current in resistor $R ?$

Ajay Singhal
Ajay Singhal
Numerade Educator
05:57

Problem 16

Find the emfs $\mathcal{E}_{1}$ and $\mathcal{E}_{2}$ in the circuit of Fig. E6.16, and find the potential difference of point $b$ relative to point $a$.

Ren Jie Tuieng
Ren Jie Tuieng
Numerade Educator
04:36

Problem 17

In the circuit shown in Fig. E6.17, find (a) the current in the $3.00-\Omega$ resistor; (b) the unknown emfs $\mathcal{E}_{1}$ and $\mathcal{E}_{2} ;$ (c) the resistance $R$. Note that three currents are given.

Ren Jie Tuieng
Ren Jie Tuieng
Numerade Educator
10:51

Problem 18

In the circuit shown in Fig. E6.18 the batteries have negligible internal resistance and the meters are both idealized. With the switch $\mathrm{S}$ open, the voltmeter reads $15.0 \mathrm{~V}$. (a) Find the emf $\mathcal{E}$ of the battery. (b) What will the ammeter read when the switch is closed?

Vishal Gupta
Vishal Gupta
Numerade Educator
04:45

Problem 19

In the circuit shown in Fig. E6.19 both batteries have insignificant internal resistance and the idealized ammeter reads $1.50 \mathrm{~A}$ in the direction shown. Find the emf $\mathcal{E}$ of the battery. Is the polarity shown correct?

Ren Jie Tuieng
Ren Jie Tuieng
Numerade Educator
09:48

Problem 20

In the circuit shown in Fig. E6.20, the $6.0-\Omega$ resistor is consuming energy at a rate of $24 \mathrm{~J} / \mathrm{s}$ when the current through it flows as shown. (a) Find the current through the ammeter A. (b) What are the polarity and emf $\mathcal{E}$ of the battery, assuming it has negligible internal resistance?

Sri Datta Vikas Buchemmavari
Sri Datta Vikas Buchemmavari
Numerade Educator
05:59

Problem 21

The resistance of a galvanometer coil is $25.0 \Omega$, and the current required for full-scale deflection is $500 \mu$ A. (a) Show in a diagram how to convert the galvanometer to an ammeter reading $20.0 \mathrm{~mA}$ full scale, and compute the shunt resistance. (b) Show how to convert the galvanometer to a voltmeter reading $500 \mathrm{mV}$ full scale, and compute the series resistance.

Shital Rijal
Shital Rijal
Numerade Educator
02:01

Problem 22

A galvanometer having a resistance of $25.0 \Omega$ has a $1.00-\Omega$ shunt resistance installed to convert it to an ammeter. It is then used to measure the current in a circuit consisting of a $15.0-\Omega$ resistor connected across the terminals of a $25.0-\mathrm{V}$ battery having no appreciable internal resistance.
(a) What current does the ammeter measure? (b) What should be the true current in the circuit (that is, the current without the ammeter present)? (c) By what percentage is the ammeter reading in error from the true current?

Jilin Wang
Jilin Wang
Boston University
09:22

Problem 23

In the ohmmeter in Fig. E6.23 $\mathrm{M}$ is a 2.50-mA meter of resistance $65.0 \Omega$. (A 2.50-mA meter deflects full scale when the current through it is $2.50 \mathrm{~mA}$.) The battery $B$ has an emf of $1.52 \mathrm{~V}$ and negligible internal resistance. $R$ is chosen so that when the terminals $a$ and $b$ are shorted $\left(R_{x}=0\right)$, the meter reads full scale. When $a$ and $b$ are open $\left(R_{x}=\infty\right)$, the meter reads zero. (a) What is the resistance of the resistor $R ?$ (b) What current indicates a resistance $R_{x}$ of $200 \Omega ?$ (c) What values of $R_{x}$ correspond to meter deflections of $\frac{1}{4}$, $\frac{1}{2}$, and $\frac{3}{4}$ of full scale if the deflection is proportional to the current through the galvanometer?

Vishal Gupta
Vishal Gupta
Numerade Educator
01:34

Problem 24

A capacitor is charged to a potential of $12.0 \mathrm{~V}$ and is then connected to a voltmeter having an intemal resistance of $3 \mathrm{M} \Omega$. After a time of $4.00 \mathrm{~s}$ the voltmeter reads $3.0 \mathrm{~V}$. What are (a) the capacitance and (b) the time constant of the circuit?

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
05:57

Problem 25

CP In the circuit shown in Fig. E6. 25 each capacitor initially has a charge of magnitude $3.50 \mathrm{nC}$ on its plates. After the switch $S$ is closed, what will be the current in the circuit at the instant that the capacitors have lost $80.0 \%$ of their initial stored energy?

Ren Jie Tuieng
Ren Jie Tuieng
Numerade Educator
06:21

Problem 26

In the circuit in Fig. E6.26 the capacitors are all initially uncharged, the battery has no internal resistance, and the ammeter is idealized. Find the reading of the ammeter (a) just after the switch $S$ is closed and (b) after the switch has been closed for a very long time.

Shital Rijal
Shital Rijal
Numerade Educator
08:48

Problem 27

In the circuit shown in Fig. E6.27, $C=6 \mu \mathrm{F}, \mathcal{E}=30 \mathrm{~V}$,
and the emf has negligible resistance. Initially the capacitor is uncharged and the switch $S$ is in position 1 . The switch is then moved to position 2, so that the capacitor begins to charge.
(a) What will be the charge on the capacitor a long time after the switch is moved to position $2 ?$ (b) After the switch has been in position 2 for $3.00 \mathrm{~ms}$, the charge on the capacitor is measured to be $120 \mu \mathrm{C}$. What is the value of the resistance $R ?$ (c) How long after the switch is moved to position 2 will the charge on the capacitor be equal to $99.0 \%$ of the final value found in part (a)?

Vishal Gupta
Vishal Gupta
Numerade Educator
02:15

Problem 28

A $1500-W$ electric heater is plugged into the outlet of a $120-\mathrm{V}$ circuit that has a $20-\mathrm{A}$ circuit breaker. You plug an electric hair dryer into the same outlet. The hair dryer has power settings of $600 \mathrm{~W}, 900 \mathrm{~W}, 1200 \mathrm{~W}$, and $1500 \mathrm{~W}$. You start with the hair dryer on the $600-\mathrm{W}$ setting and increase the power setting until the circuit breaker trips. What power setting caused the breaker to trip?

Shital Rijal
Shital Rijal
Numerade Educator
01:42

Problem 29

In Fig. P6.29, the battery has negligible internal resistance and $\mathcal{E}=50 \mathrm{~V} . R_{1}=$
$R_{2}=4.00 \Omega$ and $R_{4}=3.00 \Omega$
What must the resistance $R_{3}$ be for the resistor network to dissipate electrical energy at a rate of $250 \mathrm{~W}$ ?

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
02:39

Problem 30

Each of the three resistors in Fig. P6.30 has a resistance of $2.4 \Omega$ and can dissipate a maximum of 48 $W$ without becoming excessively heated. What is the maximum power the circuit can dissipate?

Jilin Wang
Jilin Wang
Boston University
07:00

Problem 31

If an ohmmeter is connected between points $a$ and $b$ in each of the circuits shown in Fig. P6.31, what will it read?

Ren Jie Tuieng
Ren Jie Tuieng
Numerade Educator
05:13

Problem 32

Calculate the three currents $I_{1}, I_{2}$, and $I_{3}$ indicated in the circuit diagram shown in Fig. P6.32.

Shital Rijal
Shital Rijal
Numerade Educator
02:04

Problem 33

What must the emf $\mathcal{E}$ in Fig. P6.33 be in order for the current through the $7.00-\Omega$ resistor to be $1.80 \mathrm{~A}$ ? Each emf source has negligible intemal resistance.

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
03:20

Problem 34

(a) Find the current $6.34=$ through the battery and each resistor in the circuit shown in Fig. P6.34. (b) What is the equivalent resistance of the resistor network?

Jilin Wang
Jilin Wang
Boston University
03:30

Problem 35

(a) Find the potential of point $a$ with respect to point $b$ in Fig. P6.35. (b) If points $a$ and $b$ are connected by a wire with negligible resistance, find the current in the $12.0-\mathrm{V}$ battery. Figure P6.35

Supratim Pal
Supratim Pal
Numerade Educator
01:29

Problem 36

Consider the circuit shown in Fig. P6.36. (a) What must the emf $\mathcal{E}$ of the battery be in order for a current of $2.00 \mathrm{~A}$ to flow through the $5.00-\mathrm{V}$ battery as shown? Is the polarity of the battery correct as shown? (b) How long does it take for $60.0 \mathrm{~J}$ of thermal energy to be produced in the $10.0-\Omega$ resistor?

Penny Riley
Penny Riley
Numerade Educator
02:36

Problem 37

In the circuit shown in Fig. P6.37 all the resistors are rated at a maximum power of $2.00 \mathrm{~W}$. What is the maximum emf $\mathcal{E}$ that the battery can have without burning up any of the resistors?

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
08:43

Problem 38

In the circuit shown in Fig. P6.38, the current in the $20.0-\mathrm{V}$ battery is $5.00 \mathrm{~A}$ in the direction shown and the voltage across the $8.00-\Omega$ resistor is $16.0 \mathrm{~V}$, with the lower end of the resistor at higher potential. Find (a) the emf (including its polarity) of the battery $\mathrm{X}$; (b) the current $I$ through the $200.0$-V battery (including its direction); (c) the resistance $R$.

Shital Rijal
Shital Rijal
Numerade Educator
01:38

Problem 39

Three identical resistors are connected in series. When a certain potential difference is applied across the combination, the total power dissipated is $36 \mathrm{~W}$. What power would be dissipated if the three resistors were connected in parallel across the same potential difference?

Ren Jie Tuieng
Ren Jie Tuieng
Numerade Educator
04:44

Problem 40

A resistor $R_{1}$ consumes electrical power $P_{1}$ when con nected to an emf $\mathcal{E}$. When resistor $R_{2}$ is connected to the same emf, it consumes electrical power $P_{2}$. In terms of $P_{1}$ and $P_{2}$, what is the total electrical power consumed when they are both connected to this emf source (a) in parallel and (b) in series?

Ren Jie Tuieng
Ren Jie Tuieng
Numerade Educator
05:38

Problem 41

The capacitor in Fig. P6.41 is initially uncharged. The switch is closed at $t=0$. (a) Immediately after the switch is closed, what is the current through each resistor? (b) What is the final charge on the capacitor?

Sam Stansfield
Sam Stansfield
Numerade Educator
17:07

Problem 42

Figure P6.42 employs a con vention often used in circuit diagrams. The battery (or other power supply) is not shown explicitly. It is understood that the point at the top, labeled " $36.0 \mathrm{~V}$, 's connected to the positive terminal of a $36.0-\mathrm{V}$ battery having negligible internal resistance, and that the "ground" symbol at the bottom is connected to the negative terminal of the battery. The circuit is completed through the battery, even though it is not shown on the diagram. (a) What is the potential difference $V_{a b}$, the potential of point $a$ relative to point $b$, when the switch $S$ is open? (b) What is the current through switch $S$ when it is closed? (c) What is the equivalent resistance when switch $S$ is closed?

Vishal Gupta
Vishal Gupta
Numerade Educator
15:59

Problem 43

(See Problem 6.42.) (a) What is the potential of point $a$ with respect to point $b$ in Fig. P6.43 when switch $\mathrm{S}$ is open? (b) Which point, $a$ or $b$, is at the higher potential? (c) What is the final potential of point $b$ with respect to ground when switch $\mathrm{S}$ is closed?
(d) How much does the charge on each capacitor change when $S$ is closed?

Daniel Sneed
Daniel Sneed
Numerade Educator
06:05

Problem 44

Point $a$ in Fig. P6.44 is maintained at a constant potential of $400 \mathrm{~V}$ above ground. (See Problem 6.42.) (a) What is the reading of a voltmeter with the proper range and with resistance $5.00 \times 10^{4} \Omega$ when connected between point $b$ and ground? (b) What is the reading of a voltmeter with resistance $5.00 \times 10^{6} \Omega ?$ (c) What is the reading of a voltmeter with infinite resistance?

Shital Rijal
Shital Rijal
Numerade Educator
08:27

Problem 45

The Wheatstone Bridge. P6.45, called a Wheatstone bridge, is used to determine the value of an unknown resistor $X$ by comparison with three resistors $M, N$, and $P$ whose resistances can be varied. For each setting, the resistance of each resistor is precisely known. With switches $\mathrm{K}_{1}$ and $\mathrm{K}_{2}$ closed, these resistors are varied until the current in the galvanometer $\mathrm{G}$ is zero; the bridge is then said to be balanced. (a) Show that under this condition the unknown resistance is given by $X=M P / N$. (This method permits very high precision in comparing resistors.)
(b) If the galvanometer G shows zero deflection when $M=850.0 \Omega, N=15.00 \Omega$, and $P=30 \Omega$, what is the unknown resistance $X$ ?

Vishal Gupta
Vishal Gupta
Numerade Educator
12:14

Problem 46

A $2.36-\mu \mathrm{F}$ capacitor that is initially uncharged is connected in series with a $6 \Omega$ resistor and an emf source with $\mathcal{E}=120 \mathrm{~V}$ and negligible internal resistance. (a) Just after the connection is made, what are (i) the rate at which electrical energy is being dissipated in the resistor; (ii) the rate at which the electrical energy stored in the capacitor is increasing: (iii) the electrical power output of the source? How do the answers to parts (i), (ii), and (iii) compare? (b) Answer the same questions as in part (a) at a long time after the connection is made. (c) Answer the same questions as in part (a) at the instant when the charge on the capacitor is one-half its final value.

Ren Jie Tuieng
Ren Jie Tuieng
Numerade Educator
04:32

Problem 47

An $R-C$ circuit has a time constant $R C$. (a) If the circuit is discharging, how long will it take for its stored energy to be reduced to $1 / e$ of its initial value? (b) If it is charging, how long will it take for the stored energy to reach $1 / e$ of its maximum value?

Ren Jie Tuieng
Ren Jie Tuieng
Numerade Educator
07:51

Problem 48

CALC The current in a charging capacitor is given by Eq.
(6.13). (a) The instantaneous power supplied by the battery is $\mathcal{E}_{t} .$ Integrate this to find the total energy supplied by the battery. (b) The instantaneous power dissipated in the resistor is $i^{2} R$. Integrate this to find the total energy dissipated in the resistor. (c) Find the final energy stored in the capacitor, and show that this equals the total energy supplied by the battery less the energy dissipated in the resistor, as obtained in parts (a) and (b).
(d) What fraction of the energy supplied by the battery is stored in the capacitor? How does this fraction depend on $R$ ?

Ren Jie Tuieng
Ren Jie Tuieng
Numerade Educator
04:13

Problem 49

en CIlf
(a) Using Eq. (6.17) for the current in a discharging capacitor, derive an expression for the instantaneous power $P=i^{2} R$ dissipated in the resistor. (b) Integrate the expression for $P$ to find the total energy dissipated in the resistor, and show that this is equal to the total energy initially stored in the capacitor.

Ren Jie Tuieng
Ren Jie Tuieng
Numerade Educator
02:54

Problem 50

In a potentiometer experiment it is found that no current passes through the galvanometer when the terminals of the cell are connected across $0.52 \mathrm{~m}$ of the potentiometer wire. If the cell is shunted by a resistance of $5 \Omega$, a balance is obtained when the cell is connected across $0.4 \mathrm{~m}$ of the wire. Find the internal resistance of the cell.

Vishal Gupta
Vishal Gupta
Numerade Educator
02:12

Problem 51

A battery has an emf of $\mathcal{E}=6 \mathrm{~V}$. The battery is connected in series with an ammeter and a voltmeter. If a certain resistor is connected in parallel with the voltmeter, the voltmeter reading decreases by a factor of 3, and the ammeter reading increases by the same factor. What is the initial reading $V$ of the voltmeter? All elements of the circuit have unknown internal resistances.

Saman Zulfiqar
Saman Zulfiqar
Numerade Educator
02:09

Problem 52

A frame made of thin homogeneous wire is shown in Fig. P6.52. Assume that the number of successively embedded equilateral triangle with sides decreasing by half tends to infinity. The side $\mathrm{AB}$ has a resistance $R_{0}$. The equivalent resistance between $A$ and $B$ is $\chi$

Narayan Hari
Narayan Hari
Numerade Educator
03:37

Problem 53

For the circuit shown in the Fig. P6.53, find potential difference $V_{B}-V_{A}$.

Jilin Wang
Jilin Wang
Boston University
03:02

Problem 54

For given circuit, Fig. P6.54 heat produced by a current in resistance of $5 \Omega$ is 10 Callsec. What is the heat produced in resistance of $4 \Omega$.

Varsha Aggarwal
Varsha Aggarwal
Numerade Educator
01:35

Problem 55

When a current of $2 A$ flows in a battery from negative to positive terminal, the p.d. across it is $12 V$. If a current of $3 A$ flows in the opposite direction p.d. across the terminals of the battery is $15 V$. Find the emf of the battery.

Andrew Duncan
Andrew Duncan
Numerade Educator
01:16

Problem 56

In the circuit shown the variable resistance is so adjusted that the ammeter reading is same in both the position 1 and 2 of the key. The reading of ammeter is $2 A$. If $E=10 \mathrm{~V}$, then find $x$.

Hunza Gilgit
Hunza Gilgit
Numerade Educator
02:21

Problem 57

In the circuit shown, both batteries are ideal. EMF $E_{1}$ of battery 1 has a fixed value, but emf $E_{2}$ of battery 2 can be varied between $1 V$ and $10 V$. The graph gives the currents through the two batteries as a function of $E_{2}$, but are not marked as which plot corresponds to which battery. But for both plots, current is assumed to be negative when the direction of the current through the battery is opposite the direction of that battery's emf. (direction from negative to positive)
(a) Find the value of (a) emf $E_{1}$
(b) Find the resistance $R_{1}$
(c) The resistance $R_{2}$

Keshav Singh
Keshav Singh
Numerade Educator
02:38

Problem 58

A car battery with a $12 \mathrm{~V}$ emf and an internal resistance of $0.04 \Omega$ is being charged wtih a current of $50 \mathrm{~A}$
(a) Find the potential difference $V$ across the terminals of the battery.
(b) Find the rate at which energy is being dissipated as heat inside the battery.
(c) Find the rate of energy conversion from electrical to chemical.

Ren Jie Tuieng
Ren Jie Tuieng
Numerade Educator
View

Problem 59

Consider the circuit in the figure. The switch is initially in position $A$ for a sufficiently long time to establish a steady state. At $t=0$, the switch is turned to position $B$. The capacitor $2 C$ did not hold any charge before $t=0$.
(a) Find the magnitude of charge which each plate of capacitor $\mathrm{C}$ holds just before $t=0$.
(b) $A l t t \rightarrow \infty$ when a new steady state has been established. What are the charges held by capacitors $C$ and $2 C .$
(c) The current decreases exponentially between $t=0$ to $t=\infty$. Find the time constant.
(d) Find the energy lost between $t=0$ to $t=\infty$.
(e) Find the time, at which charge in the capacitor $C$ is reduced to half of the value
it had at $t=0$.

Lainey Roebuck
Lainey Roebuck
Numerade Educator
01:00

Problem 60

A window grill-like network of conductors is fitted in a ring of zero resistance. The interstices of the network are squares of side a and are made of uniform wire of resistance $\mathrm{r}$ per unit length. What is the effective resistance between the ring and the centre $O$.

Salamat Ali
Salamat Ali
Numerade Educator
02:49

Problem 61

Twelve identical resistors each $A<$ of value $1 \Omega$ are connected as shown. Find the net resistance between $C$ and D.

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
02:51

Problem 62

A potential difference of $220 \mathrm{~V}$ is maintained across a 12000 ohm rheostat, as shown in the figure. The voltmeter has a resistance of 6000 ohm and point $c$ is at one-fourth of the distance from a to $b .$ Find the reading of the voltmeter.

Prem Bijarniya
Prem Bijarniya
Numerade Educator
01:31

Problem 63

A galvanometer of resistance $100 \Omega$ contains 100 division. It gives a deflection of one division on passing a current of $10^{-4}$
A. Find the resistance in ohms to be connected to it, so that it becomes a voltmeter of range $10 \mathrm{~V} .$

Varsha Aggarwal
Varsha Aggarwal
Numerade Educator
02:41

Problem 64

In the circuit shown in figure find the steady state charge on capacitor $C$.

Mirza  Aslam Beig
Mirza Aslam Beig
Numerade Educator
02:11

Problem 65

Two parallel plate capacitor of capacitances $2 C$ and $C$ are charged to the potentials $2 V$ and $V$ respectively and are connected in a circuit along with a resistance $R$ as shown in the diagram. The switch $k$ is closed at $t=0 .$ Find the current in the circuit as a function of time and total heat produced in the circuit.

Mayukh Banik
Mayukh Banik
Numerade Educator
02:52

Problem 66

Find the charges on $4 \mu F 4$ and $2 \mu F$ capacitors in steady state.

Keshav Singh
Keshav Singh
Numerade Educator
View

Problem 67

An Infinite Network. work of resistors of resistances $R_{1}$ and $R_{2}$ extends to infinity toward the right. Prove that the total resistance $R_{\mathrm{T}}$ of the infinite network is equal to
$$
R_{\mathrm{T}}=R_{1}+\sqrt{R_{1}^{2}+2 R_{1} R_{2}}
$$
(Hint: Since the network is infinite, the resistance of the network to the right of points $c$ and $d$ is also equal to $R_{\mathrm{T}}$.)

Lainey Roebuck
Lainey Roebuck
Numerade Educator
04:06

Problem 68

Suppose a resistor $R$ lies along each edge of a cube ( 12 resistors in all) with connections at the corners. Find the equivalent resistance between two diagonally opposite corners of the cube (points $a$ and $b$ in Fig. P6.68).

Christopher Dzorkpata
Christopher Dzorkpata
Numerade Educator