• Home
  • Textbooks
  • Schaum's Outline of Applied Physics
  • Fluids at Rest

Schaum's Outline of Applied Physics

Arthur Beiser

Chapter 16

Fluids at Rest - all with Video Answers

Educators


Section 1

Multiple choice

04:00

Problem 1

The pressure of the atmosphere at sea level corresponds to which one or more of the following?
(a) $1.013 \mathrm{~Pa}$
(c) $1013 \mathrm{mbar}$
(b) $98 \mathrm{~N} / \mathrm{m}^2$
(d) $14.7 \mathrm{lb} / \mathrm{in}^2$

Nicole Wood
Nicole Wood
Numerade Educator
03:24

Problem 2

The output piston of a hydraulic press cannot exceed the input piston's
(a) displacement
(c) work
(b) velocity
(d) force

Prabhu Ramji
Prabhu Ramji
Numerade Educator
02:12

Problem 3

A $2-\mathrm{N}$ stone dropped into a lake sinks. The buoyant force on the stone is
(a) 0
(c) $2 \mathrm{~N}$
(b) less than $2 \mathrm{~N}$
(d) more than $2 \mathrm{~N}$

Baskar P
Baskar P
Numerade Educator
01:37

Problem 4

. Seawater has a density 3 percent greater than that of freshwater. A boat will float
(a) higher in seawater than in freshwater
(b) at the same level in seawater and in freshwater
(c) lower in seawater than in freshwater
(d) any of the above, depending on the shape of the boat's hull

Shahab Ullah
Shahab Ullah
Numerade Educator
01:57

Problem 5

. The density of copper is $8.9 \times 10^3 \mathrm{~kg} / \mathrm{m}^3$. The volume of a $15 \mathrm{~g}$ copper bracelet is
(a) $0.6 \mathrm{~cm}^3$
(c) $17 \mathrm{~cm}^3$
(b) $1.7 \mathrm{~cm}^3$
(d) $134 \mathrm{~cm}^3$

Mirza  Aslam Beig
Mirza Aslam Beig
Numerade Educator
02:22

Problem 6

. Ethanol has a specific gravity of 0.79 . One liter of ethanol weighs
(a) $0.79 \mathrm{~N}$
(c) $7.7 \mathrm{~N}$
(b) $1.3 \mathrm{~N}$
(d) $12.4 \mathrm{~N}$

Kartik Indoliya
Kartik Indoliya
Numerade Educator
09:20

Problem 7

A gallon of water and a gallon of antifreeze solution weigh, respectively, 8.4 and $9.2 \mathrm{lb}$. The antifreeze solution has a specific gravity of
(a) 0.095
(c) 0.91
(b) 0.80
(d) 1.1

Keenan Mintz
Keenan Mintz
University of Miami
02:57

Problem 8

The air in a vertical cylinder $20 \mathrm{~cm}$ in diameter that is open at the top supports a $20-\mathrm{kg}$ piston. The absolute pressure on the air is
(a) 0.0064 bar
(c) 1.019 bar
(b) 0.062 bar
(d) 1.075 bar

Cathy Geisel
Cathy Geisel
Numerade Educator
03:47

Problem 9

A restaurant lobster tank is filled with seawarer of density $1.03 \mathrm{~g} / \mathrm{cm}^3$ to a depth of $60 \mathrm{~cm}$. If there are no lobsters in the tank, the gauge pressure on its bottom is
(a) $6.1 \mathrm{~Pa}$
(c) $6.1 \mathrm{kPa}$
(b) $0.62 \mathrm{kPa}$
(d) $107.4 \mathrm{kPa}$

Kudakwashe Mapiki
Kudakwashe Mapiki
Numerade Educator
03:10

Problem 10

Six lobsters are put in the tank of Question 16.9 and enough water is removed to keep its depth at $60 \mathrm{~cm}$. The gauge pressure on the tank bottom is now
(a) smaller
(c) greater
(b) the same
(d) any of the above, depending on the mass of the lobsters

Zulfiqar Ali
Zulfiqar Ali
Numerade Educator
01:46

Problem 11

. A $20 \mathrm{~g}$ spoon is put into a dish filled with water to the brim, and $3.0 \mathrm{~cm}^3$ of water overflows. The weight of the spoon in the water is
(a) $0.03 \mathrm{~N}$
(c) $0.20 \mathrm{~N}$
(b) $0.17 \mathrm{~N}$
(d) $0.23 \mathrm{~N}$

Ajay Singhal
Ajay Singhal
Numerade Educator
01:41

Problem 12

A wooden plank $2.5 \mathrm{~m}$ long. $40 \mathrm{~cm}$ wide, and $60 \mathrm{~mm}$ thick floats in water with $15 \mathrm{~mm}$ of its thickness above the surface. The plank's mass is
(a) $15 \mathrm{~kg}$
(c) $60 \mathrm{~kg}$
(b) $45 \mathrm{~kg}$
(d) $441 \mathrm{~kg}$

Akshaya Rs
Akshaya Rs
Numerade Educator
02:03

Problem 13

A hydraulic press has an input piston $10 \mathrm{~mm}$ in diameter and an output piston $50 \mathrm{~mm}$ in diameter. An input force of $80 \mathrm{~N}$ gives an output force of
(a) $3.2 \mathrm{~N}$
(c) $400 \mathrm{~N}$
(b) $16 \mathrm{~N}$
(d) $2000 \mathrm{~N}$

Arun Bana
Arun Bana
Numerade Educator
02:03

Problem 14

. Pushing the input piston of the press in Question 16.13 through $40 \mathrm{~mm}$ causes the output piston to be pushed by
(a) $1.6 \mathrm{~mm}$
(c) $40 \mathrm{~mm}$
(b) $8 \mathrm{~mm}$
(d) $200 \mathrm{~mm}$

Arun Bana
Arun Bana
Numerade Educator