Chapter 3, Networking Components Video Solutions, CompTIA Network plus Certification Study Guide

Problem 1

. What does a network interface card add to a computer's functionality?
A. It provides faster communication between the CPU and the hard disk.
B. It provides the capability to communicate across a phone line to another computer.
C. It provides the capability to communicate with other computers across a network medium.
D. It provides the capability to save more information on a diskette than normal.

Check back soon!

Problem 2

In order for a NIC to interact with the computer, what needs to be installed?
A. The appropriate documentation for the user to take advantage of the features of the interface card
B. A driver, which is software that enables the NIC and the computer to communicate with each other
C. A bus, which enables the interface card to communicate through the various topologies of the Internet
D. Nothing

Check back soon!

Problem 3

3 If a card has the capability to connect to more than one kind of medium, you might have to set which of the following in order to ensure connectivity?
A. IRQ setting
B. Link light on/off setting
C. Transceiver-type setting
D. PCI setting

Check back soon!

Problem 4

When troubleshooting to find out why a network card will not connect to the network, which of the following would you check first?
A. Driver
B. Link light
C. Transceiver-type setting
D. Switch

Check back soon!

04:17

Problem 5

Which of the following is an example of a layer-2 address?
A. 192.168 .2 .5
B. COMPUTER100
C. Computer100.glensworld.loc
D. $00-0 \mathrm{D}-60-48-53-9 \mathrm{E}$

Samriddhi Singh

Numerade Educator

Problem 6

. What is an AUI connector?
A. A 9-pin DB male connector
B. A 15-pin D female connector
C. A 25-pin D female connector
D. Same as an RJ-45 connector

Check back soon!

Problem 7

Which of the following types of hubs does not regenerate the signal and therefore is not a repeater?
A. Active
B. Hybrid
C. Passive
D. Switching hub

Check back soon!

Problem 8

Which network component is used to extend the distance the signal can travel by regenerating the signal?
A. Passive hub
B. Switch
C. Router
D. Repeater

Check back soon!

Problem 9

Which type of hub enables more than one type of cable or medium to connect to it?
A. Passive
B. Active
C. Hybrid
D. Multistation access unit

Check back soon!

Problem 10

. Which network device is used to connect systems together in a Token Ring environment?
A. Multisensing action unit
B. Multistation access unit
C. Multisplit add transmission unit
D. Multistation action unit

Check back soon!

Problem 11

When data is sent to a system on a hub, the data is sent to which port(s) on the hub?
A. The port of the destination system
B. All ports on the immediate hub but not any linked hubs
C. All ports on the immediate hub and any linked hubs
D. All ports on only the linked hub

Check back soon!

Problem 12

Which type of network component enables each device to have the full bandwidth of the medium when transmitting?
A. Hub
B. Repeater
C. Switch
D. Transceiver

Check back soon!

Problem 13

. When data is sent to a system on a switch, the data is sent to what port(s)?
A. The port of the destination system
B. All ports on the immediate hub, but not the any uplinked hubs
C. All ports on the immediate hub and any uplinked hubs
D. All ports on the uplinked hub

Check back soon!