• Home
  • Textbooks
  • Solutions to I.E. Irodov's problems in general physics
  • Thermodynamics And Molecular Physics

Solutions to I.E. Irodov's problems in general physics

Abhay Kumar Singh; I E Irodov

Chapter 2

Thermodynamics And Molecular Physics - all with Video Answers

Educators


Section 1

Equation of the Gas State. Processes

01:19

Problem 1

Let $m_{1}$ and $m_{2}$ be the masses of the gas in the vessel before and after the gas is released. Hence mass of the gas released,
$$
\Delta m=m_{1}-m_{2}
$$
Now from ideal gas equation
$$
p_{1} V=m_{1} \frac{R}{M} T_{0} \text { and } p_{2} V=m_{2} \frac{R}{M} T_{0}
$$
as $V$ and $T$ are same before and after the release of the gas.
so,
$$
\left(p_{1}-p_{2}\right) V=\left(m_{1}-m_{2}\right) \frac{R}{M} T_{0}=\Delta m \frac{R}{M} T_{0}
$$
or,
$$
\Delta m=\frac{\left(p_{1}-p_{2}\right) V M}{R T_{0}}=\frac{\Delta p V M}{R T_{0}}
$$
We also know $p=\rho \frac{R}{M} T$ so, $\frac{M}{R T_{0}}=\frac{\rho}{p_{0}}$
(where $p_{0}=$ standard atmospheric pressure and $T_{0}=273 \mathrm{~K}$ ) From Eqs. (1) and (2) we get
$$
\Delta m=\rho V \frac{\Delta p}{p_{0}}=1.3 \times 30 \times \frac{0 \cdot 78}{1}=30 \mathrm{~g}
$$

Ajay Singhal
Ajay Singhal
Numerade Educator
04:09

Problem 2

Let $m_{1}$ be the mass of the gas enclosed.
Then,
$$
p_{1} V=v_{1} R T_{1}
$$
When heated, some gas, passes into the evacuated vessel till préssure difference becomes \Deltap. Let $p_{1}^{\prime}$ and $p_{2}^{\prime}$ be the pressure on the two sides of the valve. Then $p_{1}^{\prime} V=v_{1}^{\prime} R T_{2}$ and
$$
p_{2}^{\prime} V=v_{2}^{\prime} R T_{2}=\left(v_{1}-v_{1}^{\prime}\right) R T_{2}
$$
$$
\begin{array}{r}
p_{2}^{\prime} V=\left(\frac{p_{1} V}{R T_{1}}-\frac{p_{1}^{\prime} V}{R T_{2}}\right) \text { or } p_{2}^{\prime}=\left(\frac{p_{1}}{T_{1}}-\frac{p_{1}^{\prime}}{T_{2}}\right) T_{2} \\
\text { But, } \quad p_{1}^{\prime}-p_{2}^{\prime}=\Delta p \\
\text { So, } \quad p_{2}^{\prime}=\left(\frac{p_{1}}{T_{1}}-\frac{p_{2}^{\prime}+\Delta p}{T_{2}}\right) T_{2} \\
=\frac{p_{1} T_{2}}{T_{1}}-p_{2}^{\prime}-\Delta p \\
\text { or, } & p_{2}^{\prime}=\frac{1}{2}\left(\frac{p_{1} T_{2}}{T_{1}}-\Delta p\right)=0.08 \mathrm{~atm}
\end{array}
$$

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
04:18

Problem 3

Let the mixture contain $v_{1}$ and $v_{2}$ moles of $H_{2}$ and $H_{e}$ respectively. If molecular weights of $H_{2}$ and $H_{e}$ are $M_{1}$ and $M_{2}$, then respective masses in the mixture are equal to
$$
m_{1}=v_{1} M_{1} \text { and } m_{2}=v_{2} M_{2}
$$
Therefore, for the total mass of the mixture we get,
$$
m=m_{1}+m_{2} \text { or } m=v_{1} M_{1}+v_{2} M_{2}
$$
Also, if $v$ is the total number of moles of the mixture in the vessels, then we know,
$$
v=v_{1}+v_{2}
$$
Solving (1) and (2) for $v_{1}$ and $v_{2}$, we get,
$$
v_{1}=\frac{\left(v M_{2}-m\right)}{M_{2}-M_{1}}, \quad v_{2}=\frac{m-\sqrt{r} M_{1}}{M_{2}-M_{1}}
$$
Therefore, we get $m_{1}=M_{1} \cdot \frac{\left(v M_{2}-m\right)}{M_{2}-M_{1}}$ and $m_{2}=M_{2} \frac{\left(m-v M_{1}\right)}{M_{2}-M_{1}}$
or,
$$
\frac{m_{1}}{m_{2}}=\frac{M_{1}}{M_{2}} \frac{\left(v M_{2}-m\right)}{\left(m-v M_{1}\right)}
$$
One can also express the above result in terms of the effective molecular weight $M$ of the mixture, defined as,
$$
M=\frac{m}{v}=m \frac{R T}{p V}
$$
Thus, $\frac{m_{1}}{m_{2}}=\frac{M_{1}}{M_{2}} \cdot \frac{M_{2}-M}{M-M_{1}}=\frac{1-M / M_{2}}{M / M_{1}-1}$
Using the data and table, we get :
$$
M=3 \cdot 0 \mathrm{~g} \text { and, } \frac{m_{1}}{m_{2}}=0.50
$$

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
02:35

Problem 4

We know, for the mixture, $N_{2}$ and $C O_{2}$ (being regarded as ideal gases, their mixture too behaves like an ideal gas)
$$
p V=\vee R T, \text { so } p_{0} V=v R T
$$
where, $v$ is the total number of moles of the gases (mixture) present and $V$ is the volume of the vessel. If $v_{1}$ and $v_{2}$ are number of moles of $N_{2}$ and $C O_{2}$ respectively present in the mixture, then
$$
v=v_{1}+v_{2}
$$
Now number of moles of $N_{2}$ and $C O_{2}$ is, by definition, given by
$$
v_{1}=\frac{m_{1}}{M_{1}} \text { and, } v_{2}=\frac{m_{2}}{M_{2}}
$$
where, $m_{1}$ is the mass of $N_{2}$ (Moleculer weight $=M_{1}$ ) in the mixture and $m_{2}$ is the mass of $C O_{2}$ (Molecular weight $=M_{2}$ ) in the mixture. Therefore density of the mixture is given by
$$
\begin{gathered}
\rho=\frac{m_{1}+m_{2}}{V}=\frac{m_{1}+m_{2}}{\left(v R T / P_{0}\right)} \\
=\frac{p_{0}}{R T} \cdot \frac{m_{1}+m_{2}}{v_{1}+v_{2}}=\frac{p_{0}\left(m_{1}+m_{2}\right) M_{1} M_{2}}{R T\left(m_{1} M_{2}+m_{2} M_{1}\right)} \\
=1 \cdot 5 \mathrm{~kg} / \mathrm{m}^{3} \text { on substitution }
\end{gathered}
$$

Ajay Singhal
Ajay Singhal
Numerade Educator
02:15

Problem 5

(a) The mixture contains $v_{1}, v_{2}$ and $v_{3}$ moles of $O_{2}, N_{2}$ and $C O_{2}$ respectively. Then the total number of moles of the mixture
$$
v=v_{1}+v_{2}+v_{3}
$$
We know, ideal gas equation for the mixture
$$
p V=v R T \text { or } p=\frac{v R T}{V}
$$
or, $p=\frac{\left(v_{1}+v_{2}+v_{3}\right) R T}{V}=1.968 \mathrm{~atm}$ on substitution
(b) Mass of oxygen $\left(O_{2}\right)$ present in the mixture : $m_{1}=v_{1} M_{1}$ Mass of nitrogen $\left(N_{2}\right)$ present in the mixture : $m_{2}=v_{2} M_{2}$ Mass of carbon dioxide $\left(C O_{2}\right)$ present in the mixture $: m_{3}=v_{3} M_{3}$ So, mass of the mixture
$$
m=m_{1}+m_{2}+m_{3}=v_{1} M_{1}+v_{2} M_{2}+v_{3} M_{3}
$$
Moleculer mass of the mixture : $M=\frac{\text { mass of the mixture }}{\text { total number of moles }}$
$$
=\frac{v_{1} M_{1}+v_{2} M_{2}+v_{3} M_{3}}{v_{1}+v_{2}+v_{3}}=36 \cdot 7 \mathrm{~g} / \mathrm{mol} \text { on substitution }
$$

Ajay Singhal
Ajay Singhal
Numerade Educator
06:19

Problem 6

Let $p_{1}$ and $p_{2}$ be the pressure in the upper and lower part of the cylinder respectively at temperature $T_{0}$. At the equilibrium position for the piston :
$p_{1} S+m g=p_{2} S$ or, $p_{1}+\frac{m g}{S}=p_{2}(m$ is the mass of the piston.) But $p_{1}=\frac{R T_{0}}{\eta V_{0}}$ (where $V_{0}$ is the initial volume of the lower part) So, $\quad \frac{R T_{o}}{\eta V_{0}}+\frac{m g}{S}=\frac{R T_{0}}{V_{0}}$ or, $\frac{m g}{S}=\frac{R T_{0}}{V_{0}}\left(1-\frac{1}{\eta}\right)$
Let $T$ be the sought temperature and at this temperature the volume of the lower part becomes $V^{\prime}$, then according to the problem the volume of the upper part becomes $\eta^{\prime} V^{\prime}$ Hence, $\quad \frac{m g}{S}=\frac{R T}{V^{\prime}}\left(1-\frac{1}{\eta^{\prime}}\right)$
From (1) and (2).
$$
\frac{R T_{0}}{V_{0}}\left(1-\frac{1}{\eta}\right)=\frac{R T}{V^{\prime}}\left(1-\frac{1}{\eta^{\prime}}\right) \quad \text { or, } \quad T=\frac{T_{0}\left(1-\frac{1}{\eta}\right) V}{V_{0}\left(1-\frac{1}{\eta^{\prime}}\right)}
$$
As, the total volume must be constant,
$$
V_{0}(1+\eta)=V^{\prime}\left(1+\eta^{\prime}\right) \quad \text { or, } \quad V^{\prime}=\frac{V_{0}(1+\eta)}{\left(1+\eta^{\prime}\right)}
$$
Putting the value of $V^{\prime}$ in Eq. (3), we get
$$
\begin{aligned}
&T=\frac{T_{0}\left(1-\frac{1}{\eta}\right) V_{0} \frac{(1+\eta)}{\left(1+\eta^{\prime}\right)}}{V_{0}\left(1-\frac{1}{\eta^{\prime}}\right)} \\
&=\frac{T_{0}\left(\eta^{2}-1\right) \eta^{\prime}}{\left(\eta^{\prime 2}-1\right) \eta}=0 \cdot 42 \mathrm{k} \mathrm{K}
\end{aligned}
$$

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
03:44

Problem 7

Let $\rho_{1}$ be the density after the first stroke. The the mass remains constant
$$
V \rho=(V+\Delta V) \rho_{1}, \quad \text { or, } \quad \rho_{1}=\frac{V \rho}{(V+\Delta V)}
$$
Similárly, if $\rho_{2}$ is the density after second stroke
$$
V \rho_{1}=(V+\Delta V) \rho_{2} \quad \text { or, } \quad \rho_{2}=\left(\frac{V}{V+\Delta V}\right) \rho_{1}=\left(\frac{V}{V+\Delta V}\right)^{2} \rho_{0}
$$
In this way after $n$ th stroke.
$$
\rho_{n}=\left(\frac{V}{V+\Delta V}\right)^{n} \rho_{0}
$$
Since pressure $\alpha$ density,
$p_{n}=\left(\frac{V}{V+\Delta V}\right)^{n} p_{0}$ (because temperature is constant)
It is required by $\frac{p_{n}}{p_{0}}$ to be $\frac{1}{\eta}$
so,
$$
\frac{1}{\eta}=\left(\frac{V}{V+\Delta V}\right)^{n} \text { or, } \eta=\left(\frac{V+\Delta V}{V}\right)^{n}
$$
Hence
$$
n=\frac{\ln \eta}{\ln \left(1+\frac{\Delta V}{V}\right)}
$$

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
05:47

Problem 8

From the ideal gas equation $p=\frac{m}{M} \frac{R T}{V}$
$$
\frac{d p}{d t}=\frac{R T}{M V} \frac{d m}{d t}
$$
In each stroke, volume $v$ of the gas is ejected, where $v$ is given by
$$
\nu=\frac{V}{m_{N}}\left[m_{N-1}-m_{N}\right]
$$
In case of continuous ejection, if $\left(m_{N-1}\right)$ corresponds to mass of gas in the vessel at time $t$, then $m_{N}$ is the mass at time $t+\Delta t$, where $\Delta t$, is the time in which volume $v$ of the gas has come out. The rate of evacuation is therefore $\frac{v}{\Delta t}$ i.e.
$$
C=\frac{v}{\Delta t}=-\frac{V}{m(t+\Delta t)} \cdot \frac{m(t+\Delta t)-m(t)}{\Delta t}
$$
In the limit $\Delta t-0$, we get
$$
C=\frac{V}{m} \frac{d m}{d t}
$$
From (1) and (2)
$$
\begin{gathered}
\frac{d p}{d t}=-\frac{C}{V} \frac{m R T}{M V}=-\frac{C}{V} p \quad \text { or } \quad \frac{d p}{p}=-\frac{C}{V} d t \\
\text { Integrating } \int_{p}^{p_{0}} \frac{d p}{p}=-\frac{C}{V} \int_{t}^{0} d t \quad \text { or } \ln \frac{p}{p_{0}}=-\frac{C}{V} t
\end{gathered}
$$
Thus
$$
p=p_{0} e^{-C t / V}
$$

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
01:35

Problem 9

Let $\rho$ be the instantaneous density, then instantaneous mass $=V_{\rho^{*}}$ In a short interval $d t$ the volume is increased by $C d t$. So, $V \rho=(V+C d t)(\rho+d \rho)$
(because mass remains constant in a short interval $d t)$
so, $\frac{d \rho}{\rho}=-\frac{C}{V} d t$
Since pressure $\alpha$ density $\frac{d p}{p}=-\frac{C}{V} d t$
or $\int_{p_{1}}^{p_{2}}-\frac{d p}{p}=\frac{C}{V} t$
or $t=\frac{V}{C} \ln \frac{p_{1}}{p_{2}}=\frac{V}{C} \ln \frac{1}{\eta} 1 \cdot 0 \mathrm{~min}$

Ajay Singhal
Ajay Singhal
Numerade Educator
04:49

Problem 10

The physical system consists of one mole of gas confined in the smooth vertical tube. Let $m_{1}$ and $m_{2}$ be the masses of upper and lower pistons and $S_{1}$ and $S_{2}$ are their respective areas.For the lower piston $p S_{2}+m_{2} g=p_{0} S_{2}+T$
or, $\quad T=\left(p-p_{0}\right) S_{2}+m_{2} g$
(1) Similarly for the upper piston $p_{0} S_{1}+T+m_{1} g=p S_{1}$
or, $\quad T=\left(p-p_{0}\right) S_{1}-m_{1} g$
(2) From (1) and (2) $\left(p-p_{0}\right)\left(S_{1}-S_{2}\right)=\left(m_{1}+m_{2}\right) g$
or, $\left(p-p_{0}\right) \Delta S=m g$
7)
so, $\quad p=\frac{m g}{\Delta S}+p_{0}=$ constant
From the gas law, $p V=v R T$ $p \Delta V=v R \Delta T$ (because $p$ is constant)
So, $\quad\left(p_{0}+\frac{m g}{\Delta S}\right) \Delta S l=R \Delta T$,
Hence, $\Delta T=\frac{1}{R}\left(p_{0} \Delta S+m g\right) l=0 \cdot 9 \mathrm{~K}$

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
04:12

Problem 11

(a) $p=p_{0}-\alpha V^{2}=p_{0}-\alpha\left(\frac{R T}{p}\right)^{2}$
(as, $V=R T / p$ for one mole of gas)
Thus, $T=\frac{1}{R \sqrt{\alpha}} p \sqrt{p_{0}-p}=\frac{1}{R \sqrt{\alpha}} \sqrt{p_{0} p^{2}-p^{3}}$
For $T_{\max }, \quad \frac{d}{d p}\left(p_{0} p^{2}-p^{3}\right)$ must be zero
which yields,
$$
p=\frac{2}{3} p_{0}
$$
Hence, $T_{\max }=\frac{1}{R \sqrt{\alpha}} \cdot \frac{2}{3} p_{0} \sqrt{p_{0}-\frac{2}{3} p_{0}}=\frac{2}{3}\left(\frac{p_{0}}{R}\right) \sqrt{\frac{p_{0}}{3 \alpha}}$
(b) $p=p_{0} e^{-\beta V}=p_{0} e^{-\beta R T / p}$
so
$$
\frac{\beta R T}{p}=\ln \frac{p_{o}}{p}, \text { and } T=\frac{p}{\beta R} \ln \frac{p_{0}}{p}
$$
For $T_{\max }$ the condition is $\frac{d T}{d p}=0$, which yields
$$
p=\frac{p_{0}}{e}
$$
Hence using this value of $p$ in Eq. (1), we get
$$
T_{\max }=\frac{p_{o}}{e \beta R}
$$

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
02:49

Problem 12

$T=T_{0}+\alpha V^{2}=T_{0}+\alpha \frac{R^{2} T^{2}}{p^{2}}$
(as, $V=R T / p$ for one mole of gas)
So, $p=\sqrt{\alpha} R T\left(T-T_{0}\right)^{1 / 2}$
For $\begin{aligned} p_{\min }, \frac{d p}{d T} &=0, \text { which gives } \\ T &=2 T_{0} \end{aligned}$
From (1) and (2), we get, $p_{\min }=\sqrt{\alpha} R 2 T_{0}\left(2 T_{0}-T_{0}\right)^{-1 / 2}=2 R \sqrt{\alpha T_{0}}$

Ajay Singhal
Ajay Singhal
Numerade Educator
03:26

Problem 13

Consider a thin layer at a height $h$ and thickness $d h$. Let $p$ and $d p+p$ be the pressure on the two sides of the layer. The mass of the layer is Sdhp. Equating vertical downward force to the upward force acting on the layer. $S d h \rho g+(p+d p) S=p S$
So, $\quad \frac{d p}{d h}=-\rho g$
(1)
But, $p=\frac{\rho}{M} R T$, we have $d p=\frac{\rho R}{M} d T$,
or, $-\frac{\rho R}{M} d T=\rho g d h$
So, $\quad \frac{d T}{d h}=-\frac{g M}{R}=-34 \mathrm{~K} / \mathrm{km}$
That means, temperature of air drops by $34^{\circ} \mathrm{C}$ at a height of $1 \mathrm{~km}$ above bottom.

Ajay Singhal
Ajay Singhal
Numerade Educator
03:16

Problem 14

We have, $\frac{d p}{d h}=-\rho g($ See $2.13)$ But, from $\quad p=C \rho^{n}$ (where $C$ is, $a$ const) $\frac{d p}{d \rho}=C n \rho^{n-1}$
We have from gas low $p=\rho \frac{R}{M} T$, so using (2)
$$
C \rho^{n}=\rho \frac{R}{M} \cdot T, \text { or } T=\frac{M}{R} C \rho^{n-1}
$$
Thus,
$$
\frac{d T}{d \rho}=\frac{M}{R} \cdot C(n-1) \rho^{n-2}
$$
But,
$$
\frac{d T}{d h}=\frac{d T}{d \rho} \cdot \frac{d \rho}{d p} \cdot \frac{d p}{d h}
$$
So, $\quad \frac{d T}{d h}=\frac{M}{R} C(n-1) \rho^{n-2} \frac{1}{C n \rho^{n-1}}(-\rho g)=\frac{-M g(n-1)}{n R}$

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
03:59

Problem 15

We have, $d p=-\rho g d h$ and from gas law $\rho=\frac{M}{R T} p$
Thus
$$
\frac{d p}{p}=-\frac{M g}{R T} d h
$$
Integrating, we get
or,
$$
\int_{p_{0}}^{p} \frac{d p}{p}=-\frac{M g}{R T} \int_{0}^{h} d h \text { or, } \ln \frac{p}{p_{0}}=-\frac{M g}{R T} h
$$
(where $p_{0}$ is the pressure at the surface of the Earth.)
$$
p=p_{0} e^{-M g h / R T}
$$
[Under standard condition, $p_{0}=1 \mathrm{~atm}, T=273 \mathrm{~K}$ Pressure at a height of $5 \mathrm{~atm}=1 \times e^{-28 \times 9.81 \times 5000 / 8314 \times 273}=0.5 \mathrm{~atm}$.
Pressure in a mine at a depth of $5 \mathrm{~km}=1 \times e^{-28 \times 9.81 \times(-5000) / 8314 \times 273}=2 \mathrm{~atm} .$ ]

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
03:46

Problem 16

We have $d p=-\rho g d h$ but from gas law $p=\frac{\rho}{M} R T$
Thus $\quad d p=\frac{d \rho}{M} R T$ at const. temperature
So, $\quad \frac{d \rho}{\rho}=\frac{g M}{R T} d h$
Integrating within limits $\int_{\rho_{0}}^{\rho} \frac{d \rho}{\rho}=\int_{0}^{h} \frac{g M}{R T} d h$
or, $\quad \ln \frac{\rho}{\rho_{0}}=-\frac{g M}{R T} h$
So, $\rho=\rho_{0} e^{-M g h / R T}$ and $h=-\frac{R T}{M g} \ln \frac{\rho}{\rho_{0}}$
(a) Given $T=273^{\circ} \mathrm{K}, \frac{\rho_{0}}{\rho}=e$
Thus $\quad h=-\frac{R T}{M g} \ln e^{-1}=8 \mathrm{~km}$.
(b) $T=273^{\circ} \mathrm{K}$ and
$\frac{\rho_{0}-\rho}{\rho_{0}}=0.01$ or $\frac{\rho}{\rho_{0}}=0.99$
Thus $\quad h=-\frac{R T}{M g} \ln \frac{\rho}{\rho_{0}}=0.09 \mathrm{~km}$ on substitution

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
03:02

Problem 17

From the Barometric formula, we have
$$
p=p_{0} e^{-M g h / R T}
$$
and from gas law $\rho=\frac{p M}{R T}$
So, at constant temperature from these two Eqs.
$$
\rho=\frac{M p_{0}}{R T} e^{-M g h / R T}=\rho_{0} e^{-M g h / R T}
$$
Eq. (1) shows that density varies with height in the same manner as pressure. Let us consider the mass element of the gas contained in the coltumn.
$$
d m=\rho(S d h)=\frac{M p_{0}}{R T} e^{-M g h / R T} S d h
$$
Hence the sought mass,
$$
m=\frac{M p_{0} S}{R T} \int_{0}^{h} e^{-M g h R T} d h=\frac{p_{0} S}{g}\left(1-e^{-M_{g} h R T}\right)
$$

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
02:55

Problem 18

As the gravitational field is constant the centre of gravity and the centre of mass are same. The location of C.M.
$$
h=\frac{\int_{0}^{\infty} h d m}{\int_{0}^{\infty} d m \int_{0} \rho d h}
$$
But from Barometric formula and gas law $\rho=\rho_{0} e^{-M_{g} h / R T}$
$\begin{aligned} \text { So, } & \int_{0}^{\alpha} h\left(e^{-M g h / R T}\right) d h \\ & \int_{0}\left(e^{-M g h / R T}\right) d h \end{aligned}=\frac{R T}{M g}$

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
03:21

Problem 19

(a) We know that the variation of pressure with height of a fluid is given by :
$$
d p=-\rho g d h
$$
But from gas law $p=\frac{\rho}{M} R T$ or, $\rho=\frac{p M}{R T}$
From these two Eqs.
or,
$$
\begin{gathered}
d p=-\frac{p M g}{R T} d h \\
\frac{d p}{p}=\frac{-M g d h}{R T_{0}(1-a h)}
\end{gathered}
$$
Integrating,
$$
\int_{p_{0}}^{p} \frac{d p}{p}=\frac{-M g}{R T_{0}} \int_{0}^{h} \frac{d h}{(1-a h)}, \text { we get }
$$
$$
\ln \frac{p}{p_{0}}=\ln (1-a h)^{M_{g} / a R T_{0}}
$$
Hence, $p=p_{0}(1-a h)^{M g / a R T_{0}}$. Obvionsly $h<\frac{1}{a}$
(b) Proceed up to Eq. (1) of part (a), and then put $T=T_{0}(1+a h)$ and proceed further in the same fashion to get
$$
p=\frac{p_{0}}{(1+a h)^{\text {Mg } / a R T_{0}}}
$$

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
02:25

Problem 20

Let us consider the mass element of the gas (thin layer) in the cylinder at a distance $r$ from its open end as shown in the figure. Using Newton's second law for the element
$$
\begin{gathered}
F_{n}=m w_{n}: \\
(p+d p) S-p S=(\rho S d r) \omega^{2} r \\
\text { or, } \quad d p=\rho \omega^{2} r d r=\frac{p M}{R T} \omega^{2} r d r
\end{gathered}
$$
So, $\frac{d p}{p}=\frac{M \omega^{2}}{R T} r d r$ or, $\int_{p_{0}}^{p} \frac{d p}{p}=\frac{M \omega^{2}}{R T} \int_{0}^{r} r d r$
Thus, $\ln \frac{p}{p_{0}}=\frac{M \omega^{2}}{2 R T} r^{2}$ or, $p=p_{0} e^{M \omega^{2} r^{2} / 2 R T}$

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
01:55

Problem 21

For an ideal gas law
$$
p=\frac{\rho}{M} R T
$$
So, $\quad p=0.082 \times 300 \times \frac{500}{44}$ atms $=279 \cdot 5$ atmosphere
For Vander Waal gas Eq. $\left(p+\frac{v^{2} a}{V^{2}}\right)(V-v b)=v R T, \quad$ where $V=v V_{M}$
or,
$$
\begin{aligned}
p=\frac{v R T}{V-v b}-\frac{a v^{2}}{V^{2}}=\frac{m R T / M}{V-\frac{m b}{M}}-\frac{a m^{2}}{V^{2} M^{2}} \\
&=\frac{\rho R T}{M-\rho b}-\frac{a \rho^{2}}{M^{2}}=79 \cdot 2 \mathrm{~atm}
\end{aligned}
$$

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
03:38

Problem 22

(a) $p=\left[\frac{R T}{V_{M}-b}-\frac{a}{V_{M}^{2}}\right](1+\eta)=\frac{R T}{V_{M}}$
(The pressure is less for a Vander Waal gas than for an ideal gas)
or, $\quad \frac{a(1+\eta)}{V_{M}^{2}}=R T\left[\frac{-1}{V_{M}}+\frac{1+\eta}{V_{M}-b}\right]=R T \frac{\eta V_{M}+b}{V_{M}\left(V_{M}-b\right)}$
or, $T=\frac{a(1+\eta)\left(V_{M}-b\right)}{R V_{M}\left(\eta V_{M}+b\right)}$, (here $V_{M}$ is the molar volume.)
$$
=\frac{1.35 \times 1 \cdot 1 \times(1-0.039)}{0.082 \times(0.139)} \approx 125 \mathrm{~K}
$$
(b) The corresponding pressure is
$$
\begin{aligned}
p &=\frac{R T}{V_{M}-b}-\frac{a}{V_{M}^{2}}=\frac{a(1+\eta)}{V_{M}\left(\eta V_{M}+b\right)}-\frac{a}{V_{M}^{2}} \\
&=\frac{a}{V_{M}^{2}} \frac{\left(V_{M}+\eta V_{M}-\eta V_{M}-b\right)}{\left(\eta V_{M}+b\right)}=\frac{a}{V_{M}^{2}} \frac{\left(V_{M}-b\right)}{\left(V_{M}+b\right)} \\
&=\frac{1 \cdot 35}{1} \times \frac{0.961}{0 \cdot 139}=9 \cdot 3 \mathrm{~atm}
\end{aligned}
$$

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
02:26

Problem 23

$p_{1}=R T_{1} \frac{1}{V-b}-\frac{a}{V^{2}}, p_{2}=R T_{2} \frac{1}{V-b}-\frac{a}{V^{2}}$
So, $p_{2}-p_{1}=\frac{R\left(T_{2}-T_{1}\right)}{V-b}$
or. $V-b=\frac{R\left(T_{2}-T_{1}\right)}{p_{2}-p_{1}}$ or, $b=V-\frac{R\left(T_{2}-T_{1}\right)}{p_{2}-p_{1}}$
Also, $\quad p_{1}=T_{1} \frac{p_{2}-p_{1}}{T_{2}-T_{1}}-\frac{a}{V^{2}}$,
$\frac{a}{V^{2}}=\frac{T_{1}\left(p_{2}-p_{1}\right)}{T_{2}-T_{1}}-p_{1}=\frac{T_{1} p_{2}-p_{1} T_{2}}{T_{2}-T_{1}}$
or, $a=V^{2} \frac{T_{1} p_{2}-p_{1} T_{2}}{T_{2}-T_{1}}$
Using $T_{1}=300 \mathrm{~K}, p_{1}=90 \mathrm{atms}, T_{2}=350 \mathrm{~K}, p_{2}=110 \mathrm{~atm}, V=0.250$ litre
$a=1.87 \mathrm{~atm} .$ litre $^{2} / \mathrm{mole}^{2}, b=0.045$ litre/mole

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
01:33

Problem 24

$p=\frac{R T}{V-b}-\frac{a}{V^{2}}-V\left(\frac{\partial p}{\partial V}\right)_{T}=\frac{R T V}{(V-b)^{2}}-\frac{2 a}{V^{2}}$
or, $\quad \kappa=\frac{-1}{V}\left(\frac{\partial V}{\partial p}\right)_{T}$
$=\left[\frac{R T V^{3}-2 a(V-b)^{2}}{V^{2}(V-b)^{2}}\right]^{-1}=\frac{V^{2}(V-b)}{\left[R T V^{3}-2 a(V-b)^{2}\right]}$

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
01:44

Problem 25

For an ideal gas $\kappa_{0}=\frac{V}{R T}$ Now $k=\frac{(V-b)^{2}}{R T V}\left\{1-\frac{2 a(V-b)^{2}}{R T V^{3}}\right\}^{-1}=\kappa_{0}\left(1-\frac{b}{V}\right)^{2}\left\{1-\frac{2 a}{R T V}\left(1-\frac{b}{V}\right)^{2}\right\}^{-1}$
$=\kappa_{0}\left\{1-\frac{2 b}{V}+\frac{2 a}{R T V}\right\}$, to leading order in $a, b$
Now $\quad \kappa>\kappa_{0}$ if $\frac{2 a}{R T V}>\frac{2 b}{V}$ or $T<\frac{a}{b R}$
If $a, b$ do not vary much with temperature, then the effect at high temperature is clearly determined by $b$ and its effect is repulsive so compressibility is less.

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator