Book cover for Physics

Physics

John D. Cutnell, Kenneth W. Johnson

ISBN #9780471663157

7th Edition

2,456 Questions

Group icon
42,754 Students Helped

Homework Questions

Right arrow
Summary

Learning Objectives

Key Concepts

Example Problems

Explanations

Common Mistakes

Summary

This section of the textbook emphasizes that forces applied on rigid bodies can produce both translational and rotational effects. Critical to understanding rotational dynamics is the concept of torque, which depends not only on the magnitude of the force but also on the location and angle of its application. The moment of inertia quantifies the resistance of a body to angular acceleration and is greatly influenced by mass distribution. Newton’s second law for rotation, expressed as ?? = I?, parallels its translational counterpart and serves as the basis for analyzing problems in rotational motion, energy, and momentum. The conservation of angular momentum is a powerful tool in explaining phenomena such as changing spin rates in systems like figure skaters and orbiting satellites.

Learning Objectives

1

-

2

2.

3

E

4

x

5

p

Key Concepts

CONCEPT

DEFINITION

No concepts available

No definitions available for this book.

Example Problems

Example 1

You are installing a new spark plug in your car, and the manual specifies that it be tightened to a torque that has a magnitude of $45 \mathrm{~N} \cdot \mathrm{m}$. Using the data in the drawing, determine the magnitude $F$ of the force that you must exert on the wrench.

Example 2

In San Francisco a very simple technique is used to turn around a cable car when it reaches the end of its route. The car rolls onto a turntable, which can rotate about a vertical axis through its center. Then, two people push perpendicularly on the car, one at each end, as shown in the drawing. The turntable is rotated one-half of a revolution to turn the car around. If the length of the car is $9.20 \mathrm{~m}$ and each person pushes with a $185-\mathrm{N}$ force, what is the magnitude of the net torque applied to the car?

Example 3

Interactive Solution 9.3 at presents a model for solving this problem. The wheel of a car has a radius of $0.350 \mathrm{~m}$. The engine of the car applies a torque of $295 \mathrm{~N} \cdot \mathrm{m}$ to this wheel, which does not slip against the road surface. Since the wheel does not slip, the road must be applying a force of static friction to the wheel that produces a countertorque. Moreover, the car has a constant velocity, so this countertorque balances the applied torque. What is the magnitude of the static frictional force?

Example 4

The drawing shows a lower leg being exercised. It has a 49-N weight attached to the foot and is extended at an angle $\theta$ with respect to the vertical. Consider a rotational axis at the knee. (a) When $\theta=90.0^{\circ}$, find the magnitude of the torque that the weight creates. (b) At what angle $\theta$ does the magnitude of the torque equal $15 \mathrm{~N} \cdot \mathrm{m}$ ?

Example 5

The steering wheel of a car has a radius of $0.19 \mathrm{~m}$, while the steering wheel of a truck has a radius of $0.25 \mathrm{~m} .$ The same force is applied in the same direction to each. What is the ratio of the torque produced by this force in the truck to the torque produced in the car?

Scroll left
Scroll right

Step-by-Step Explanations

Scroll left
Scroll right

Common Mistakes

  • -
  • 2.
  • F
  • a
  • i