Abstract
The superconductor at the LaAlO_{3}—SrTiO_{3} interface provides a model system for the study of twodimensional superconductivity in the dilute carrier density limit. Here we experimentally address the pairing mechanism in this superconductor. We extract the electron—phonon spectral function from tunneling spectra and conclude, without ruling out contributions of further pairing channels, that electron—phonon mediated pairing is strong enough to account for the superconducting critical temperatures. Furthermore, we discuss the electron—phonon coupling in relation to the superconducting phase diagram. The electron—phonon spectral function is independent of the carrier density, except for a small part of the phase diagram in the underdoped region. The tunneling measurements reveal that the increase of the chemical potential with increasing carrier density levels off and is zero in the overdoped region of the phase diagram. This indicates that the additionally induced carriers do not populate the band that hosts the superconducting state and that the superconducting order parameter therefore is weakened by the presence of charge carriers in another band.
Introduction
Interface superconductors are model systems for superconductivity in reduced dimensions^{1} and provide input to the longstanding problem of understanding the mechanism of superconductivity in the layered cuprate superconductors. A prominent example is the superconductor at the LaAlO_{3}—SrTiO_{3} interface^{2,3,4}. In this twodimensional electron liquid (2DEL), superconductivity coexists with ferromagnetism^{5,6,7} and spinorbit coupling^{8,9}, providing the ingredients for exotic superconducting states such as finite momentum pairing^{10,11}. Regarding the pairing mechanism, both conventional electron—phonon coupling and electronic pairing mechanisms are being considered^{12,13,14}. We recently mapped out the superconducting gap across the phase diagram and obtained a picture qualitatively similar to the phase diagram of the highT_{c}cuprate superconductors: in the underdoped region the gap increases with charge carrier depletion^{15}. This similarity between the doping dependence of the superconducting gap of LaAlO_{3}—SrTiO_{3} and the highT_{c}cuprates makes understanding the pairing mechanism in LaAlO_{3}—SrTiO_{3} even more relevant. No experimental study of the pairing interaction exists, however.
The LaAlO_{3}—SrTiO_{3} interface 2DEL differs from the electron system in doped SrTiO_{3} because the band structures of the systems are different. But the critical temperatures are in the same range and it may well be that the pairing mechanism is the same. The superconductivity in doped SrTiO_{3}^{16} is generally explained in terms of the Bardeen Cooper Schrieffer (BCS) theory. Different phonon modes can contribute to the pairing interaction and the relative contributions of the different modes are still a topic of discussion^{17,18,19,20,21}. The critical temperature T_{c} of doped SrTiO_{3} has a domeshaped dependence on the carrier density n, with a maximum T_{c} (400–600 mK) at an extremely small carrier density of ~10^{19} cm^{−3} ^{22,23,24}. According to the BCS theory, the T_{c} of a superconductor depends on the Fermi surface area and on the electron—phonon coupling strength. As doped SrTiO_{3} has a small Fermi surface area, it follows that the electron—phonon coupling would need to be exceptionally strong to explain superconductivity at such a small carrier density. Strong electron—phonon coupling is indeed possible because the Fermi energy and the plasma edge are smaller than some of the SrTiO_{3} phonon energies (predominantly the fourth longitudinal optical mode LO4 at ~100 meV) involved. Therefore plasma excitations cannot screen these phonons well, yielding strong electron—phonon coupling, as observed in tunneling experiments^{25,26}. At n > 5·10^{19} cm^{−3}, however, the plasma edge energy exceeds 100 meV, so that screening becomes more effective and the electron—phonon coupling is reduced. This mechanism has been proposed to explain the reduction of T_{c} of doped SrTiO_{3} in the overdoped regime^{20}. Furthermore, the SrTiO_{3} longitudinal optical phonon modes have also been suggested to be important for the superconductivity in FeSe monolayers on SrTiO_{3}^{27}.
To shed light into the pairing mechanism of the superconducting phase at the LaAlO_{3}—SrTiO_{3} interface we have performed tunnel experiments to spectroscopically measure the electron—phonon coupling α^{2}F(ω) at the LaAlO_{3}—SrTiO_{3} interface. We observe coupling to the SrTiO_{3} LO modes and not to other modes. Therefore the LO phonons are the likely candidate for providing the pairing interaction. We measured the evolution of both the chemical potential and the electron—phonon spectral function across the superconducting dome. The electron—phonon spectral function is found to only depend on the carrier density in the underdoped region. In the overdoped region the chemical potential is surprisingly constant. It is concluded that with increased doping the additionally induced charge carriers reside in a band that does not contribute to the pairing. Instead, the additional carriers result in Coulomb scattering of the electrons in the superconducting band, thereby reducing the superconducting gap.
Results
Figure 1 presents the differential conductance characteristic dI/dV (V) of a typical LaAlO_{3}—SrTiO_{3} tunnel junction at T = 4.2 K. Here I is the tunnel current and V is the voltage applied between the 2DEL and the Au counterelectrode. The polarity of the voltage characterizes the sign of the interface voltage with respect to the top electrode bias; for V < 0 electrons tunnel out of the 2DEL. The tunnel characteristics are asymmetric, with a large tunnel conductance for V > 0 and a relatively small tunnel conductance for V < 0. At voltages well below the barrier height, the differential conductance of a tunnel junction is proportional to the density of states in the electrodes. Because the density of states of the Au electrode does not change significantly with energy, the dI/dV (V) characteristic reflects the density of states of the 2DEL and the inelastic tunneling processes. Close to the conduction band edge of the 2DEL, the 2DEL density of states is strongly energydependent. When the absolute value of the negative voltage exceeds the chemical potential μ, the differential conductance is expected to almost vanish, as the tunnel conductance then probes the density of states in the bandgap. Here μ is defined with respect to the band edge, so at V = 0 V the 2DEL density of states at energy E = μ is probed. The differential conductance rapidly decreases for V < 0 and a minimum is observed at V = −30 mV (Fig. 1). We identify this minimum with the conductionband edge and attribute the increase of the conductance at larger negative bias voltages to inelastic tunneling processes and to barrier effects. In this part of the characteristic two prominent peaks are present, at V ≈ −60 mV and V ≈ −100 mV.
To analyze the origin of the peaks in the inelastic tunneling conductance, the second derivative of the I(V) characteristics is analyzed, as the peaks in the second derivative correspond to the energies of the interacting boson modes^{28}. Figure 2 presents the –d^{2}I/dV^{2}(V) characteristics of seven tunnel junctions on different samples. Five of the samples were fabricated with standard LaAlO_{3}—SrTiO_{3} interfaces, while sample T6 was fabricated using a SrTi^{18}O_{3} substrate. The five standard samples have very similar characteristics, the peaks being at identical voltages. The four LO phonon modes of SrTiO_{3} are at energies of 19.8, 33.0, 58.8 and 98.6 meV (measured at room temperature)^{29,30,31,32,33}. At the energies of the LO2, LO3 and LO4 modes we indeed observe peaks in the –d^{2}I/dV^{2}(V) characteristics. The LO1 mode is not directly observed. Additional peaks are observed at, e.g., 77.9, 157.5 and 196.2 mV. These can be identified as harmonics of the phonon energies, LO1 + LO3, LO3 + LO4 and twice LO4, respectively. The phonon energies extracted from the tunneling data are in good agreement with those observed by hyperRaman measurements^{33}, as listed in Table 1. The small difference originates presumably from the different measurement temperatures. One sample was grown using a SrTi^{18}O_{3} single crystal^{34}. In this oxygen—isotope substituted sample, small shifts of the phonon energies can be expected. We observed a shift of 3.2 meV towards lower energy in the LO4 mode. The other modes are shifted by less than 1 meV. The isotope effect is stronger for the LO4 mode as this mode involves large displacements of the oxygen ions. Because similar shifts have been observed in Raman measurements on SrTi^{18}O_{3} (not shown), a significant fraction of ^{18}O (larger than 60%) has to be present in the interfacial region of the sample, even after the LaAlO_{3} growth and annealing in a ^{16}O environment.
Having shown that electron—phonon coupling can be directly observed in the LaAlO_{3}—SrTiO_{3} tunnel junctions, we now discuss its relation to superconductivity. We measured the gatevoltage dependence of the phonon—assisted tunneling in a device for which we previously determined the superconducting phase diagram^{15}. A positive (negative) gate voltage accumulates carriers at (depletes carriers from) the 2DEL. Optimum doping with maximum T_{c} is achieved at V_{G} = 0 V. At positive (negative) gate bias the system is overdoped (underdoped). Here T_{c} is defined as the temperature at which the resistive superconducting transition is observed. The gatevoltage dependence of the tunnel characteristics is presented in Fig. 3. For positive gate voltages the characteristics are not affected by V_{G}. Negative gate voltages, however, decrease the tunnel conductance significantly. This decrease is due to a change in the chemical potential μ that reduces the occupied density of states in the 2DEL. To precisely determine the gatevoltage dependence of μ, we analyzed the shifts in voltage in the conductance curves at positive voltages, see Fig. 4. These shifts are constant over a large voltage range and can be used to accurately determine Δμ, the change in chemical potential in comparison to the overdoped cases. We determine μ for V_{G} > 50 V by finding the crossing point between the almost constant conductance in the range −55 < V < −35 mV (mostly inelastic tunneling) and the strongly voltage dependence conductance in the range −25 < V < 0 mV (elastic tunneling). This yields μ = 30 ± 2 mV, in good agreement with the data in Fig. 1. The tunneling spectra in Fig. 3 show a small reduction of the conductance close to the Fermi energy at V > −3 mV. In related cases, this reduction is attributed to the Altshuler—Aronov correction to the density of states of an electron system with electron—electron interactions^{35}. A detailed analysis of the Altshuler—Aronov correction is beyond the scope of this article. The most important observation is that the phonon—assisted tunneling peaks are consistently observed for all gate voltages.
For quantitative analysis of the electron—phonon coupling, the inelastic tunneling probability has to be evaluated at the different energies. In the case of tunneling with the emission of real phonons studied here (as opposed to the case of the virtual phonon—coupling induced selfenergy correction studied in superconducting tunnel junctions^{36}), the tunneling probability is proportional to α^{2}F(ω)^{37,38,39}. The tunneling conductance is a function of both the density of states and the inelastic tunneling probability. The observed shape of the inelastic tunneling peaks is due to a convolution of the electron—phonon spectral function with the occupied density of states of the 2DEL. Because the voltage range in which elastic tunneling occurs (V > −μ/e) and the voltage range in which inelastic tunneling occurs (V < −μ/e) are separated in energy, we have experimental access to the occupied density of states of the 2DEL. Here e is the electron charge. We therefore deconvoluted the density of occupied states (as measured by elastic tunneling in the voltage range −μ/e < V < 0) from the inelastic tunneling conductance (see Methods). This procedure yields a function proportional to the electron—phonon spectral function, which is shown in Fig. 5. The magnitude of the function has been normalized such that α^{2}F (ω)·dω reflects the ratio of the inelastic tunneling transmission in an energy range dω around ω and the total elastic tunnel transmission. The dominant features of α^{2}F (ω) are the strong coupling at the LO3 (~60 meV) and LO4 (~100 meV) phonon modes. The phonon energies obtained from α^{2}F (ω), see Table 1, are are in good agreement with those obtained from the peaks in –d^{2}I/dV^{2}(V). Next to the peaks from the phonons, a background that increases with increasing energy is present. In tunneling, the barrier height decreases with increasing voltage and therefore some additional elastic tunneling is also present at voltages V < −μ/e. The deconvolution procedure ignores this and the elastic part of the tunneling conductance results in the background. The α^{2}F (ω) function is unaffected by the gate voltage, except for an overall increase at negative gate voltages.
Discussion
The main objective of our study is to identify the pairing mechanism of the LaAlO_{3}—SrTiO_{3} 2DEL by measuring the coupling of the electrons to bosonic modes with inelastic tunneling spectroscopy. Up to energies of 200 meV we find only coupling to the LO phonons of SrTiO_{3}. The phonon—assisted tunneling conductance in the 2DEL junctions is significantly larger than that observed in, e.g., Pb junctions^{37,38,40} and is of similar magnitude as that observed in doped SrTiO_{3} junctions^{25,26}. This indicates that the electron—phonon scattering crosssection is large. The measurements yield α^{2}F (ω) with an unknown proportionality constant and we therefore cannot calculate the critical temperature. So, the results are not unambiguous proof that the LO phonons do provide the pairing mechanism. Because we observe coupling to the LO phonons and do not observe coupling to other modes, we have to conclude, however, that these tunnel spectroscopy measurements point clearly to electron—phonon coupling as the pairing channel. Note that next to the observed coupling to the LO phonons, coupling to the acoustic phonons may be present as well, as discussed for example in ref. 12. Our measurements namely do not discriminate coupling to acoustic phonons modes from the elastic tunneling conductance if the bosonic spectral function is not strongly energydependent.
We next discuss the gatevoltage dependence of the electron—phonon coupling. The coupling strength is characterized by the McMillan parameter λ that is obtained from α^{2}F (ω) by^{41}
We extracted λ from the data in Fig. 5 by integrating equation (1) over the energy range 30 < E < 145 meV. The resulting values for λ are presented in Fig. 6a, where they have been normalized to those in the overdoped region. Approximately 60% of the coupling is due to the LO4 mode and approximately 25% of the coupling is due to the LO3 mode, independent of V_{G}. The doping dependence of λ can be compared to that of the previously determined T_{gap} values, the temperatures at which the superconducting gap closes. We note that the gatevoltage dependence of T_{gap} is different from that of T_{c} (Fig. 6c). λ is constant for V_{G} > −50 V and increases with decreasing carrier density in the underdoped region of the phase diagram. In the underdoped region of the superconducting phase diagram, the increase of λ with decreasing carrier concentration is qualitatively consistent with the increase of T_{gap}. However, in the main part of the phase diagram T_{gap} depends strongly on the applied gate voltage and λ is constant. The decrease of T_{gap} in the optimally doped and overdoped region is therefore puzzling. In the following we show that this decrease can be directly understood by considering the band structure of the 2DEL.
Density functional theory calculations^{9,42,43}, transport properties^{44,45} and recent angleresolvedphotoemission (ARPES) data^{46} indicate that the 2DEL comprises several bands: small electron mass d_{xy} orbital derived bands and large electron mass d_{xz} and d_{yz} orbital derived bands. Because the d_{xz} and d_{yz} orbital derived bands have larger momenta in the tunnel direction, tunneling occurs predominantly to those bands. This is consistent with the band structure determined from ARPES measurements^{46}: the bottom of the d_{xz} and d_{yz} orbital derived bands lies approximately 50 meV below the Fermi energy, in reasonable agreement with the μ = 30 mV observed in tunneling. The bottom of the d_{xy} orbital derived bands lies approximately 300 meV below the Fermi energy. Because the superconducting gap is observed in the tunneling characteristics with the temperature dependence of a primary order parameter^{15}, we conclude that the d_{xz} and d_{yz} orbital derived bands host the dominant contribution to the superconductivity.
Figure 6b presents the gate voltage dependence of the chemical potential in these bands. In the underdoped region μ steadily increases with increasing carrier density, as expected. However, at optimal doping the increase of μ levels off and μ is almost constant in the entire overdoped region. Because the shape of the tunneling characteristic is virtually independent of V_{G}, the additionally induced charge carriers have to reside in one or several higherenergy bands with large density of states that are not accessible to the tunneling, such as in a d_{xy} orbital derived band or in a band further away from the interface. In agreement with this conclusion, signatures of such a band have been observed in transport studies^{45}, exactly appearing at gate voltages larger than the one at optimum T_{c} (see also the Hall effect data in references^{47,48}). The charge carriers in this additional band are presumably not superconducting (or only superconducting due to the proximity effect from the other bands), but will provide more Coulomb scattering to the electrons in the superconducting bands, thereby explaining the reduction of superconductivity in the overdoped region. Electronic phase separation in superconducting and nonsuperconducting regions could also explain the doping independence of μ, but in this scenario the density of states is expected to change with doping, contrary to the measurements.
In summary, we performed tunneling experiments to identify the superconducting pairing mechanism in the LaAlO_{3}—SrTiO_{3} 2DEL. We determined α^{2}F (ω) and observed electron—phonon coupling across the entire superconducting phase diagram. We only observed coupling to the LO phonons of SrTiO_{3} and the coupling to the LO4 mode was measured to be particularly pronounced. We conclude that electron—phonon coupling likely provides the pairing mechanism for the superconductivity. In the underdoped region the decrease of T_{gap} with increasing carrier density is possibly explained by a reduction of the electron—phonon coupling strength, but in the optimally doped and overdoped regions the electron—phonon coupling is dopingindependent. In these regions an additional band becomes populated, as evidenced by tunneling measurements of the chemical potential in the 2DEL. The charge carriers in this band result in additional Coulomb scattering and thereby weaken the superconductivity, causing the reduction of T_{gap}. This scenario is intriguingly similar to the reduction of T_{c} in overdoped gatetuned MoS_{2}^{49,50} and to the constant chemical potential observed in cuprate interface superconductors^{51}.
Methods
Experimental
The tunnel junctions were fabricated by first growing a 4 or 5 unit cell thick layer of LaAlO_{3} on TiO_{2} terminated^{52} SrTiO_{3} by pulsed laser deposition to create the 2DEL^{53}. Then a gold top electrode was deposited on the LaAlO_{3} in situ. The gold layer was patterned using standard photolithography and selective chemical etching with a KI + I_{2} solution. In a final processing step ohmic contacts to the electron system were made by argon ion milling and Ti sputtering. The device area ranges from 0.2 to 1 mm^{2}. The fabrication and characterization of the devices is described in more detail elsewhere^{15}. We fabricated devices using both SrTi^{16}O_{3} and SrTi^{18}O_{3}^{34} single crystals. We did not see an effect of the oxygen isotope exchange on the normalstate transport properties or on the superconducting properties of the 2DEL.
Extracting the electron—phonon spectral function
In superconducting tunnel junctions, the selfenergy correction to the BCS density of states due to the electron—phonon coupling can be directly observed and quantitatively modeled using the Eliashberg theory. In the LaAlO_{3}—SrTiO_{3} 2DEL this does not work because the selfenergy correction is not observed. The phonon—assisted tunnel spectra are identical in the superconducting and normal state (not shown) because the superconducting gap (~50 μeV) is much smaller than the phonon energies involved. Therefore the normal state density of states has to be used to quantify the electron—phonon coupling. In normal metal phonon—assisted tunneling, the inelastic part of the tunneling conductance is a convolution of the electron—phonon spectral function and the density of states of the electron system.
where g_{i} is the inelastic conductance, K is a constant and N_{occ}(E) is the occupied density of states. In case the density of states is constant in the energy range of interest, N_{occ} is the heaviside step function. Then the derivative of equation (2) with respect to the energy yields the proportionality between dg_{i}(E)/dE and α^{2}F(ω). This relation is generally used in inelastic tunneling spectroscopy^{28,37,38,39}. In case the density of states is not constant, changes in g_{i}(E) are either due to changes in α^{2}F(ω) or to changes in N_{occ}(E). When N_{occ}(E) is known, α^{2}F(ω) can be extracted from g_{i}(E) with the procedure described in the following. A discrete version of Eq. (2) can be written as
Here ΔE is the step size in energy. The summation is cut off after τ = μ because the density of states is zero at larger energies. We identify the tunnel conductance in the range −μ/e < V < 0 as N_{occ}(E) and the tunnel conductance in the range V < −μ/e as g_{i}(E). Now g_{i}(μ + ΔE) can be used to determine α^{2}F(μ + ΔE), because α^{2}F(E) is assumed to be zero for E < μ. Following this, α^{2}F(μ + 2ΔE) can be obtained. The procedure works best when the tunnel conductance at E = μ is zero, giving a clear separation between density of states and inelastic tunneling. If this is not the case, a large spike will result in α^{2}F(E) at E = μ + ΔE. This spike can be removed by adjusting a constant value for α^{2}F(E) for E < μ.
Additional Information
How to cite this article: Boschker, H. et al. Electronphonon Coupling and the Superconducting Phase Diagram of the LaAlO_{3}SrTiO_{3} Interface. Sci. Rep. 5, 12309; doi: 10.1038/srep12309 (2015).
References
Pereiro, J., Petrovic, A., Panagopoulos, C. & Božović, I. Interface superconductivity: history, development and prospects. Phys. Express 1, 208 (2011).
Ohtomo, A. & Hwang, H. Y. A highmobility electron gas at the LaAlO3/SrTiO3 heterointerface. Nature 427, 423–426 (2004).
Reyren, N. et al. Superconducting interfaces between insulating oxides. Science 317, 1196–1199 (2007).
Caviglia, A. D. et al. Electric field control of the LaAlO(3)/SrTiO(3) interface ground state. Nature 456, 624–627 (2008).
Li, L., Richter, C., Mannhart, J. & Ashoori, R. C. Coexistence of magnetic order and twodimensional superconductivity at LaAlO3/SrTiO3 interfaces. Nature Phys. 7, 762–766 (2011).
Bert, J. A. et al. Direct imaging of the coexistence of ferromagnetism and superconductivity at the LaAlO3/SrTiO3 interface. Nature Phys. 7, 767–771 (2011).
Dikin, D. A. et al. Coexistence of Superconductivity and Ferromagnetism in Two Dimensions. Phys. Rev. Lett. 107, 056802 (2011).
Caviglia, A. D. et al. Tunable Rashba SpinOrbit Interaction at Oxide Interfaces. Phys. Rev. Lett. 104, 126803 (2010).
Zhong, Z., Tóth, A. & Held, K. Theory of spinorbit coupling at LaAlO3/SrTiO3 interfaces and SrTiO3 surfaces. Phys. Rev. B 87, 161102 (2013).
Michaeli, K., Potter, A. C. & Lee, P. A. Superconducting and Ferromagnetic Phases in SrTiO3/LaAlO3 Oxide Interface Structures: Possibility of Finite Momentum Pairing. Phys. Rev. Lett. 108, 117003 (2012).
Loder, F., Kampf, A. P. & Kopp, T. Superconductivity with Rashba spin—orbit coupling and magnetic field. J. Phys.: Condens. Matter 25, 362201 (2013).
Klimin, S. N., Tempere, J., Devreese, J. T. & van der Marel, D. Interface superconductivity in LaAlO3SrTiO3 heterostructures. Phys. Rev. B 89, 184514 (2014).
Stephanos, C., Kopp, T., Mannhart, J. & Hirschfeld, P. J. Interfaceinduced dwave pairing. Phys. Rev. B 84, 100510 (2011).
Scheurer, M. S. & Schmalian, J. Topological superconductivity and unconventional pairing in oxide interfaces. Nature Commun. 6, 6005 (2015).
Richter, C. et al. Interface superconductor with gap behaviour like a hightemperature superconductor. Nature 502, 528–531 (2013).
Schooley, J. F., Hosler, W. R. & Cohen, M. L. Superconductivity in semiconducting SrTiO3. Phys. Rev. Lett. 12, 474 (1964).
Appel, J. Softmode superconductivity in SrTiO3x. Phys. Rev. 180, 508& (1969).
Ngai, K. L. 2Phonon deformation potential and superconductivity in degenerate semiconductors. Phys. Rev. Lett. 32, 215–218 (1974).
Takada, Y. Theory of superconductivity in polar semiconductors and its application to ntype semiconducting SrTiO3. J. Phys. Soc. Jpn. 49, 1267–1275 (1980).
Baratoff, A. & Binnig, G. Mechanism of Superconductivity in SrTi03. Phys. B & C 108, 1335–1336 (1981).
Klimin, S. N., Tempere, J., van der Marel, D. & Devreese, J. T. Microscopic mechanisms for the Fermiliquid behavior of Nbdoped strontium titanate. Phys. Rev. B 86, 045113 (2012).
Koonce, C. S., Cohen, M. L., Schooley, J. F., Hosler, W. R. & Pfeiffer, E. R. Superconducting transition temperatures of semiconducting SrTiO3. Phys. Rev. 163, 380& (1967).
Pfeiffer, E. & Schooley, J. Superconducting transition temperatures of Nbdoped SrTiO3. Phys. Lett. A 29, 589–590 (1969).
Lin, X. et al. Critical Doping for the Onset of a TwoBand Superconducting Ground State in SrTiO3delta. Phys. Rev. Lett. 112, 207002 (2014).
Sroubek, Z. Electron tunneling in indiumSrTiO3:Nb Schottky barriers. Solid State Commun. 7, 1561–1564 (1969).
Hayashi, S., Aoki, R. & Ohta, T. Tunneling Spectroscopy in InSrTiO3x Contact. J. Phys. Soc. Jpn. 50, 2619–2624 (1981).
Lee, J. J. et al. Interfacial mode coupling as the origin of the enhancement of Tc in FeSe films on SrTiO3. Nature 515, 245–248 (2014).
Wolf, E. L. in Principles of electron tunneling spectroscopy 2nd edn. (Oxford Science Publishing, 2012).
Spitzer, W. G., Miller, R. C., Kleinman, D. A. & Howarth, L. E. Far Infrared Dielectric Dispersion in BaTiO3, SrTiO3 and TiO2. Phys. Rev. 126, 1710 (1962).
Cowley, R. A. Lattice Dynamics and Phase Transitions of Strontium Titanate. Phys. Rev. 134, A981–A997 (1964).
Frederikse, H. P. R. & Hosler, W. R. Hall mobility in SrTiO3. Phys. Rev. 161, 822 (1967).
Servoin, J. L., Luspin, Y. & Gervais, F. Infrared dispersion in SrTiO3 at high temperature. Phys. Rev. B 22, 5501–5506 (1980).
Vogt, H. HyperRaman tensors of the zonecenter optical phonons in SrTiO3 and KTaO3. Phys. Rev. B 38, 5699–5708 (1988).
Schneider, C. W. et al. The origin of oxygen in oxide thin films: Role of the substrate. Appl. Phys. Lett. 97, 192107 (2010).
Altshuler, B. & Aronov, A. Zero bias anomaly in tunnel resistance and electronelectron interaction. Solid State Commun. 30, 115–117 (1979).
McMillan, W. L. & Rowell, J. M. Lead Phonon Spectrum Calculated from Superconducting Density of States. Phys. Rev. Lett. 14, 108–112 (1965).
Adler, J. G., Kreuzer, H. J. & Wattamaniuk, W. J. Multichannel Theory of Inelastic Electron Tunneling in Normal MetalInsulatorMetal Junctions. Phys. Rev. Lett. 27, 185–187 (1971).
Schackert, M. et al. Local Measurement of the Eliashberg Function of Pb Islands: Enhancement of ElectronPhonon Coupling by Quantum Well States. Phys. Rev. Lett. 114, 047002 (2015).
Jandke, J., Hlobil, P., Schackert, M., Wulfhekel, W. & Schmalian, J. Coupling to real and virtual phonons in tunneling spectroscopy of superconductors. arXiv:1504.01932v1 (2015).
Dynes, R. C. & Rowell, J. M. Influence of electronsperatom ratio and phonon frequencies on the superconducting transition temperature of lead alloys. Phys. Rev. B 11, 1884–1894 (1975).
McMillan, W. L. Transition Temperature of StrongCoupled Superconductors. Phys. Rev. 167, 331–344 (1968).
Popović, Z. S., Satpathy, S. & Martin, R. M. Origin of the TwoDimensional Electron Gas Carrier Density at the LaAlO3 on SrTiO3 Interface. Phys. Rev. Lett. 101, 256801 (2008).
Son, W.J., Cho, E., Lee, B., Lee, J. & Han, S. Density and spatial distribution of charge carriers in the intrinsic ntype LaAlO3SrTiO3 interface. Phys. Rev. B 79, 245411 (2009).
Pentcheva, R. et al. Parallel ElectronHole Bilayer Conductivity from Electronic Interface Reconstruction. Phys. Rev. Lett. 104, 166804 (2010).
Joshua, A., Pecker, S., Ruhman, J., Altman, E. & Ilani, S. A universal critical density underlying the physics of electrons at the LaAlO3/SrTiO3 interface. Nature Commun. 3, 1129 (2012).
Berner, G. et al. Direct kSpace Mapping of the Electronic Structure in an OxideOxide Interface. Phys. Rev. Lett. 110, 247601 (2013).
Bell, C. et al. Dominant Mobility Modulation by the Electric Field Effect at the LaAlO3/SrTiO3 Interface. Phys. Rev. Lett. 103, 226802 (2009).
Herranz, G. et al. Engineering twodimensional superconductivity and Rashba spinorbit coupling in LaAlO3/SrTiO3 quantum wells by selective orbital occupancy. Nature Commun. 6, 6028 (2015).
Ye, J. T. et al. Superconducting Dome in a GateTuned Band Insulator. Science 338, 1193–1196 (2012).
Das, T. & Dolui, K. QuasiparticlePhonon Coupling Mediated Superconducting Dome in MoS2 and TiSe2. Phys. Rev. B 91, 094510 (2015).
Wu, J. et al. Anomalous independence of interface superconductivity from carrier density. Nature Mater 12, 877–881 (2013).
Koster, G., Kropman, B. L., Rijnders, G. J. H. M., Blank, D. H. A. & Rogalla, H. Quasiideal strontium titanate crystal surfaces through formation of strontium hydroxide. Appl. Phys. Lett. 73, 2920–2922 (1998).
Thiel, S., Hammerl, G., Schmehl, A., Schneider, C. W. & Mannhart, J. Tunable quasitwodimensional electron gases in oxide heterostructures. Science 313, 1942–1945 (2006).
Acknowledgements
We thank A. Brinkman, P. Hirschfeld, P. Horsch, J. R. Kirtley, T. Kopp, F. Loder, K. A. Moler, N. Pavlenko and J.M. Triscone for valuable discussions.
Author information
Affiliations
Contributions
H.B. and J.M. conceived the experiment. C.R. fabricated the tunnel junctions. C.R., H.B. and E.F.T. performed the measurements and analyzed the data. C.S. performed the oxygen isotope exchange. J.M. supervised the research. H.B. wrote the manuscript with help from all other authors.
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Boschker, H., Richter, C., FillisTsirakis, E. et al. Electron—phonon Coupling and the Superconducting Phase Diagram of the LaAlO_{3}—SrTiO_{3} Interface. Sci Rep 5, 12309 (2015). https://doi.org/10.1038/srep12309
Received:
Accepted:
Published:
Further reading

Superconductivity in fewlayer stanene
Nature Physics (2018)

Published Tunneling Results of Binnig et al Interpreted as Related to Surface Superconductivity in SrTiO3
Journal of Superconductivity and Novel Magnetism (2018)

Multiband Superconductivity Due to the Electron–LO–Phonon Interaction in Strontium Titanate and on a SrTiO3/LaAlO3 Interface
Journal of Superconductivity and Novel Magnetism (2017)

Isotope effect in superconducting ndoped SrTiO3
Scientific Reports (2016)

Gate dependence of upper critical field in superconducting (110) LaAlO3/SrTiO3 interface
Scientific Reports (2016)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.