00:01
In this problem, we have two charges, q1 and q2, q1 hanging from a thin wire.
00:08
Because of q2's presence, q1 will hang in equilibrium at some angle theta.
00:14
The purpose of this problem is to find that angle theta and the tension in the thin wire.
00:20
So what do we start in a problem like this? where do we start? we start with a free buy diagram.
00:26
So we have, for the mass m, we'll have its weight straight down, m.
00:31
G will have, now we have positive q1, negative q2, so that's an attractive force, so that will be to the right, that's fq1, f21, and then we'll have a tension along the wire and an angle theta with the, and we'll just have our normal x, y, axes.
01:02
Now, once we have the free bi diagram, the place to go is the f net equations in component form f net x f2 .1 is only in positive x so the x component is going to be the full vector magnitude f21 mg straight down so it has no x component the tension is at an angle here is t x which is in the negative x direction and t y which is in the positive y direction so wrong and tx is the opposite of theta.
01:40
So it's going to be minus t sine theta is equal to zero.
01:47
And not much we can do with this equation, because we have two unknowns, t and theta.
01:52
So let's move on to f net y.
01:57
F net y.
02:00
T, y.
02:01
Now this is the adjacent side.
02:03
So it's going to be t cosine theta.
02:07
The weight is straight down.
02:09
So minus mg.
02:11
F2 .1 is horizontal.
02:12
It has no y component, so this is equal to 0.
02:17
So from this, i can solve for t.
02:19
T is equal to mg over cosine theta.
02:25
Now call this equation 2.
02:30
Now, what we can do is place equation 2 into 1.
02:37
We're going to try to eliminate one of the variables...