Determine the static or dc resistance of the commercially...

Determine the static or dc resistance of the commercially available diode of Fig. 15 at a reverse voltage of $-10 \mathrm{~V}$. How does it compare to the value determined at a reverse voltage of $-30 \mathrm{~V} ?$

Key Concepts

Reverse Bias Behavior and Leakage Current

When a diode is reverse biased, it ideally blocks conduction except for a very small leakage current. This leakage current, which increases slightly with an increase in reverse voltage, directly impacts the static resistance calculation, as resistance is defined by the voltage-to-current ratio. At a more negative reverse voltage, like -30 V compared to -10 V, even a modest increase in leakage current will lower the static resistance, illustrating the sensitivity of reverse-biased diode resistance to small changes in the leakage current.

Diode I-V Characteristics

The diode I-V characteristics describe the relationship between the voltage applied to a diode and the resulting current flow through it. In reverse bias, a diode is designed to allow only a minimal leakage current until a breakdown occurs. This relationship is crucial for understanding how the diode behaves under different voltage conditions, which in turn influences calculated parameters such as resistance.

Static (DC) Resistance

Static, or DC, resistance of a diode is determined by taking the ratio of the applied voltage to the current measured at a specific operating point. It reflects the overall level of opposition the diode presents to current flow when a constant voltage is applied. In reverse bias, because the leakage current is extremely small, the static resistance becomes very high, and any changes in the leakage current with voltage changes will be reflected in variations in the computed resistance.

Transcript

Please give Ace some feedback