For commonly used CMOS (complementary metal oxide semiconductor) digital circuits, the charging of the component capacitors $C$ to their working potential difference $V$ accounts for the major contribution of its energy input requirements. Thus, if a given logical operation requires such circuitry to charge its capacitors $N$ times, we can assume that the operation requires an energy of $N\left(\frac{1}{2} C V^{2}\right) .$ In the past 20 years, the capacitance in digital circuits has been reduced by a factor of about 20 and the voltage to which these capacitors are charged has been reduced from $5.0 \mathrm{~V}$ to $1.5 \mathrm{~V} .$ Also, present-day alkaline batteries hold about five times the energy of older batteries. Two present-day AA alkaline cells, each of which measures $1 \mathrm{~cm}$ diameter by $4 \mathrm{~cm}$ long, can power the logic circuitry of a hand-held personal digital assistant (PDA) with its display turned off for about two months. If an attempt was made to construct a similar PDA (i.e., same digital capabilities so $N$ remains constant) 20 years ago, how many (older) AA batteries would have been required to power its digital circuitry for two months? Would this PDA fit in a pocket or purse?