00:01
For this problem, we will start from figure one and we'll start from the right and find the equivalent resistance of each of these combinations one by one as we move on.
00:15
And thereby we will have a very small circuit over here in the final figure and just finding the equivalent resistance of this will give us the total equivalent resistance of the whole.
00:29
Circuit.
00:30
So all these four diagrams represent the same circuit but we have just modified them a little bit or like replaced some of the resistance, some of the combination of resistors by their equivalent resistance.
00:49
So we will start from, we will start from figure one.
00:55
So this is the diagram of the full circuit without any changes.
01:03
Now the three resistors, these three, let me just pick another color.
01:08
So this one, this one and this one.
01:10
So these three as you can see are in series because the current flowing through them will be the same.
01:19
The current will follow the single path in order to come to be and therefore these are in series which means that the equivalent resistance will be some of these three and since they are they have the same value the equivalent resistance of these three resistors will be three r so in diagram two where i have these three resistors replaced by a single resistor we can say that the magnitude of this resistor will be three r because this is just the replacement of these three registers in series so this these two are equivalent.
02:04
So we have gone from here to here.
02:08
Now these two, as you can see, are parallel r and 3 are because they have the same nodes, same nodes.
02:19
And when a current flows through this point and at this point the current gets divided into these two branches and the voltage across these two points are also same.
02:31
So these two two are in parallel.
02:35
And this means that we can replace this point ef over here.
02:40
So basically this is the resistance, ef, which is the equivalent resistance of r and 3r.
02:50
And so let's find r equivalent of these two registers.
02:56
So we use the reciprocal method.
03:01
And this gives the resistance to be 3r over 4.
03:04
Which means that.
03:05
We can replace these two resistors with a single resistor having the same node as you can see ef here and ef here so having the same nodes by this equivalent resistance so this should be three are over four now again as here you can see if this diagram you see to the right are three are over four and these three are in series which means that the equivalent resistance of this combination, this part, will be some of these three.
03:46
So r plus 3 r over 4 plus r.
03:50
And this will give 11 over 4 times r.
03:57
So the equivalent resistance of these three registers is the equivalent resistance of these three resistors is 11 over 4 r.
04:09
11 r over 4 so we can replace these three registers by single one having a value of this and they should be the same nodes that's why i have represented each of these nodes so that you can it will be easier to point the nodes mark the nodes so we have replaced these three resistors by single register 11 over 4 r and they should have these three should have the same starting and ending point cd as you can see here now again so r and 11 over 4r so these two are in parallel which means that their equivalent resistance will be so we use the reciprocal rule and this should come out to be 11 over 15 r so i need to draw one more diagram which i'll draw quickly and the notes they should have the same cd and we will replace these two by a single resistor having a value of 11 by 11 over 15 r.
05:52
Now this is simple so these three are again in series which means that are equivalent which is the equivalent resistance of the total circuit is just some of of these three and this is equal to 41 over 15 r.
06:19
Now we can plug the value of r which is given to be 125 ooms and this will give us the total equivalent resistance which is 341 .67 ooms or approximately 342 ooms.
06:42
So this is the equivalent.
06:43
Resistance of the whole circuit...