00:01
So as you can see, there are three currents involved, i1, i2, and i3.
00:07
So there must be three independent equations to find these currents.
00:12
So one we can get by applying each of junction rule at this point or this point, whichever one you can choose.
00:25
So this will give us i2 to be equal to i1 plus i3.
00:36
I'm applying the junction roll over here.
00:40
And let's call that equation one.
00:44
And then we can apply the loop rule to the top loop, this one, starting with the negative terminal of the battery and we will progress clockwise.
00:59
So we will go this way.
01:03
And since we are going negative to positive inside the battery, so the emf should be positive.
01:10
So we should write plus e1.
01:16
Then we are going along the direction of current i1.
01:20
So we will have negative i1 times r1.
01:24
Again we are going along the direction of the current i2.
01:28
So we should have negative i2r2.
01:32
And plugging the values that we have, we get 9 equal to 25 i1 plus 48 i2 let's call this equation two now we can apply loop rule to this uh the bottom loop and we start with again the negative terminal of the battery and we let's progress counterclockwise now so that you'll get an idea of how the equations will change depending on how you go so for that case so we are going again from negative to positive inside the battery.
02:21
So we should have plus e2.
02:24
Then we are going along the direction of current here, i3.
02:28
So we should have negative i3 times r3.
02:33
And at this point as well, we are going along the direction of current.
02:38
So we should have negative i2r2.
02:41
And if you had gone clockwise here like this so your equation will ultimately be same except for the signs but since you'll have your right hand side to be zero you can say that both of the both of those equations will be same so let's write that down so for the case going if you're going clockwise and you're starting with the positive terminal of the battery so you're going from positive to negative inside the battery so you should have negative e2 then you're going opposite to the direction of current i2 here so you should have positive i2 r2 again you are going positive to r3 positive to the direction of current at this resistor so you should have yeah so you're going opposite to the direction current at this register so you should have plus i3r3 and this must be equal to 0 and if you multiply minus 1 in both sides you'll get this and just exchanging these two like swapping these two and multiplying minus 1 on either sides so you'll get this equation which is exactly same as to what you found by going counterclockwise so so yeah, now plugging all the values over here, you get 12 equal to 35 i3 plus 48 i2.
04:34
And let's call this equation 3.
04:38
Now, in order to solve these two equations, we can start with equation 1, since it's the simplest one.
04:47
And let's solve for i1, which will be i2 minus i3.
04:54
And where else we will substitute i1, this expression of i1, into those equations which have i1 in them.
05:03
So that's equation 2 here.
05:05
I3 does not have i1.
05:07
So we will pick equation 2 solve this by putting i1, this expression of i1 over here.
05:14
So let's see what we get.
05:24
So doing that, excuse me.
05:27
So, doing that, we will get 9 equal to 25 i1, which is i2 minus i3 that we found from equation 1 plus 48 i2.
05:43
And we solve this and we get 9 to be equal to 73 i2 minus 25 i3.
06:01
Let's call this equation 2 -dash because we have substituted.
06:06
This is basically equation 2, but now instead of i -1 and i -2, we have i -2 and i -3.
06:14
So now we have two unknowns, i -2 and i -3, and two equations, 2 -dash and 3.
06:20
So let's pick one of these two and solve for one unknown.
06:27
And i'm going to go with the bottom loop equation which is equation 3 here and solve for i2.
06:40
So let me just write it in this small space.
06:47
So i'm solving this equation for i2.
06:50
So i'll have i2 equal to 12 minus 35 i3 over 48.
07:01
Now that i have i2 in terms of i3, i'll plug that expression into dash.
07:09
So i'll get 9 equal to 73, 12 times 35 i3 over 48 minus 25 i3 equals to, oops, minus 25 5 .3.
07:26
And this will give me i3.
07:30
So this is basically an equation with just one unknown i3.
07:38
So i can solve this equation for i3.
07:41
This will give me 0 .1182 ampere or you can say this is approximately 0 .12 ampere...