00:01
In this question, we want to find the currents passing through resistors r1 and r2.
00:08
First, we notice that resistor r2 is connected in parallel with the battery v3.
00:17
That is, there is no other components between the terminals of the battery and the two ends of the resistor.
00:25
That means the voltage across the resistor is exactly the same as the potential difference between the terminals of the battery, that is b3.
00:41
So we have 6 volts on the two ends of register r2.
00:48
And so according to omnsla, the current that is flowing through r2 is, should be flowing from the positive potential to the negative potential necessarily.
01:05
And to find the magnitude of this, current we name it i2 and you can find it according to omsla so i2 would be equal to the voltage difference that is v3 or six volts divided by the resistance that is 15 o and this will give us 0 .4 amp the current passing through r2 and this is the correct direction of the current now to find the current passing through r1 we're not sure which direction the current would be so we assume this direction or the current passing through r1 and we name it i1 and to find this current we use loop rule and we consider this loop starting from this point and going all around the circuit to the other battery and then going back to this point.
02:31
So let's call this point point point point point point point point point for example.
02:37
So we are using a loop rule and starting from point p.
02:52
So the first element that we get to writing the loop rule is a resistance r1.
03:02
And since we are moving in the direction of the current i1, we will be losing potential...