00:01
Okay, in this problem we have two batteries that are connected in series with a resistor and we want to find the terminal voltages of the two batteries.
00:15
So let's first name these terminals so that we can denote the voltage.
00:22
So let's call this terminal a and b.
00:26
In this way, the voltage terminal of the battery with electromagnetic force 18 volt can be called vab.
00:36
So that is the value we want to calculate, and also let's call terminal voltages of the second batch is c and d.
00:46
And this way, the voltage we are looking for is v -c -d.
00:51
So to calculate voltages first we need to calculate the current of the circuit.
01:01
So let's assume a direction for the current of the circuit.
01:05
And since all the elements of the circuit are connected in series, the same current is going through all the elements of the circuit.
01:16
So the direction of i all through the circuit would be denoted by these arrows.
01:32
So now let's start from point a and use loop rule and go in the direction of the current.
01:51
So we want to start from point a and loop the circuit in the clockwise direction.
02:00
In this direction and go through all the elements of the circuit and getting back to point a.
02:09
And we want to write the loop rule in this loop.
02:15
So starting from point a, we first get to 6 .6 on register store.
02:20
And since we are moving in the direction of the current we assumed, we are necessarily losing potential.
02:29
So the first voltage difference would be negative.
02:34
So the voltage drop across 6 .6 volts would be equal to minus 6 .6 oom multiplied by i.
02:47
And this is according to omsla.
02:50
So then after that, we get to point c and we go inside the first battery.
03:01
So we are moving in this direction from the positive to the negative terminal of this electromagnetic force.
03:14
So we are necessarily losing potential.
03:19
So we go down by 12 volts, so minus 12 volt...