00:01
For this problem, we're given a circuit and we want to figure out at time t equals zero what is the current through each of the resistors, as well as what is the current through each of those resistors at time equals infinity.
00:20
We want to find the voltage across the second resistor at both of those times and sketch what the voltage across the second resistor.
00:30
Looks like as a function of time.
00:33
So to start off, before we even jump into finding any of these currents, i'm going to relabel all of the resistances as r because that's going to make our lives much, much easier as we're going through and solving problems.
00:48
So for the current through resistor one, resistor one is connected directly to the battery.
00:56
So it is going to be equivalent to the current through the battery.
01:00
Which is given by the emf of the battery divided by the equivalent resistance of the circuit.
01:11
If we were to keep our labels 1, 2, and 3, we would end up with an equivalent resistance of r1 plus r2 times r3 divided by r2 plus r3.
01:28
But when you make the substitution that r1 equals r2 equals r3 equals r, we just end up with two thirds emf divided by r as the current through resistor 1.
01:45
And when you plug in values, you get a current of 0 .001 amps.
01:53
For part b, we want to find the current through resistor 2 .2.
02:00
So we're going to use kirkhoff's laws here and consider the loop.
02:07
Excuse me, that includes resistor 1 and resistor 2.
02:11
And i sort of skipped a step.
02:14
We're assuming that the capacitor isn't there.
02:16
We're kind of ignoring it because at time t equals zero, capacitors just act like resisteless wires.
02:24
So i should have started off by saying that, but i'm saying it now.
02:28
Now we are going to set up our kirkhoff's law so we have emf minus i1r1 minus i2 r2 is all equal to zero which means that if you solve for i2 we end up with i2 being equal to emf minus i1r all divided by r.
03:00
Again, we're making our substitution there, which ends up being equal, or sorry, which ends up being equal to 0 .0055 amps.
03:22
Okay.
03:24
Now we want to find the current through resistor three.
03:29
There are a couple of ways that you can go about this.
03:33
I am going to do it by using the junction rule.
03:36
So i'm going to look at this junction here, assuming that current i -1 is entering from the left.
03:49
I -2 is exiting and going down.
03:53
And i -3.
03:54
Is exiting and going to the right here.
03:59
So if that is the case, then i -1 must be equal to i -2 plus i -3, which implies that i -3 then is equal to i -1 minus i -2.
04:13
We found i -1 in part a, we found i -2 in part b, so we can simply find i -3 by subtracting then, and you get that i -3 is also 0 .0 -0 -5...