Texts: Can you solve this question, please? Can you answer in a way that you understand the question, or can you create a question that is expected to be asked based on what I have provided?
Question 1 [10.0 points]:
Figure 1: Traffic Engineering with OpenFlow
Figure 1 reveals a network where the traffic flowing from the first host, which is attached to router U, to the server, which is attached to router Z, needs to be routed along the path UXW2. Meanwhile, the traffic flowing from the second host, attached to router X, to the server, attached to router Z, needs to be routed along the path [path not provided]. Please describe the local flow table of each of the traffic flows according to the constraints described above. The following IP addresses will be used for the two hosts and the server. The first host belongs to the subnetwork 10.1.0.0/16. It is attached to router U and has an IP address of 10.1.0.1. The second host belongs to subnetwork 10.5.0.0/16. It is attached to router X and has an IP address of 10.5.0.1. The server belongs to the subnetwork 10.11.0.0/16. It is attached to router Z and has an IP address of 10.11.0.1. Note that you can build upon the OpenFlow example at the end of Chapter 4 to answer this question. The example is presented below.
OpenFlow Example:
Datagrams from hosts h5 and h6 should be sent to h3 or h4 via s1 and from there to s2.
malch IPSrc=10.3 forward(3)
10.1.0.1
action
Host h3 10203 forward(3)
IPS 10.3 IPDst=10.2
nra(4)
(tpe