A roof of a particular coal mine comprises of interlaminated shale/mudstone bands ( 13 , 14,16,20,15 and 19) cms overlain by competent sandstone layer 1m thick. Given that; Hole diameter is 26mm Bolt diameter 20mm Steel strength 600MPa Roadwidth 7.0m Sandstone UTS 5MPa Sandstone density 2650k(g)/(m^(3)) Take note that a pull test was performed at the mine to determine the resin/rock interface shear resistance. The pull out load was 110 kilo-Newtons on the bond length of 30cm . a. Design the roof bolt support standard for the roof of this mine. [25] b. Also determine the steel strength required to satisfy the S_(b) parameter. [10] c. If the resin capsule diameter and length are 23mm and 1350mm , determine the shortfall or excess volume of resin for full column resin. [15]