Texts: A 100-ohm resistor is in series with a 1 H inductor, set at 10 V DC, and the steady-state current was 0.06 A. For the first 0.555 seconds, the voltage is 0.01 V, and the current is 5.44e^-4 A. Then the voltage rises to 8.46 V and falls back down to 1.75 V, leaving a current of 0.03 A. It continues to run with this new voltage and current. Estimate the inductance. When simulated, this setup shows that the voltage of the resistor and inductor should be zero. Why is that not the case for the actual data?