Before Exxaro closed its operations in Springs, Zincor produced zinc from a concentrate of sphalerite (ZnS) by roasting, leaching, and electrowinning—(1) roasting the concentrate with oxygen-enriched air in a fluidized bed at 930°C, (2) leaching the oxidized product (ZnO) with sulfuric acid, and (3) plating zinc metal from solution onto cathodes. At one time, there were four roasters. The footprint of each of the two smaller roasters was 18 m^2. Imagine that you were an engineer overseeing the operation of these two roasters. Each of these two roasters processes 117 t/d of concentrate. The composition of the concentrate is as follows: 92% sphalerite, 7% pyrite (FeS2), and 1% chalcopyrite (CuFeS2). The air used to roast these sulfides is enriched to 25% O2 and is supplied at a rate of 520 Nm^3/m^2/h. The oxidation reactions are as follows:
ZnS + 1½O2 = ZnO + SO2 ........................................................ (reaction 1)
2FeS2 + 5½O2 = Fe2O3 + 4SO2 .................................................. (reaction 2)
2FeCuS2 + 6½O2 = Fe2O3 + 2CuO + 4SO2 .................................. (reaction 3)
These reactions are exothermic. Can you confirm this? To maintain the fluidized bed in each roaster at 930°C, cooling coils are immersed in the bed. The coils are supplied with cooling water at 30°C, and the temperature of the water rises to 90°C.
The plant superintendent has asked you to provide a short report on the state of the roasters. Your report will include:
1. The rate (t/d) at which each roaster processes sulfur.
2. The rate (Nm^3/d) at which SO2 is produced.
3. The consumption (Nm^3/d) of air.
4. The volume (Nm^3) of off-gas produced by one roaster in a day.
5. The excess air (Nm^3/d)—i.e., air contributing oxygen that does not participate in any reaction. What reason would you give for there being an excess of air?
6. The composition of the off-gas, specifically the volume fractions (expressed as a percentage) of SO2 and O2.
7. The energy generated by each roaster (kWh/d).
8. The volume of water required to remove heat from the roaster and maintain the temperature at 930°C.
Please show your calculations and reasoning for each answer.