A flyback converter is operated at 50 kHz switching frequency to supply power to two isolated loads (load1: 15V, 30 W, load2: 5 V, 20 W). The input to the flyback converter is derived from the 230 V mains by using a capacitor input filter rectifier. The on state voltage drop of diode and switch can be taken as 1.1 V and 0.9 V respectively. The converter is operated at the boarder of CCM and DCM mode. a) Find transformer turns ratio b) Find inductance across each winding of the transformer. c) Find the value of filter capacitor at load side for a voltage ripple of 2% d) Draw the flyback converter input current waveform, voltage waveform across the switches and diodes as well as current waveform through it. Mention required rating (voltage and current) of each element/device in this converter