Numerade

Questions asked

BEST MATCH

a nurse is about to irrigate a clients open wound, besides gloves which following personal protective equipment should the nurse wear

View Answer

BEST MATCH

(10) Use Cramer's Rule to solve the following system: $x_1 + 2x_2 - x_3 = 5$ $x_1 - 4x_2 + 3x_3 = -2$ $x_1 + x_3 = 3$

View Answer

BEST MATCH

This type of decision making is basically just human judgement based on available information. O the clinical approach O the statistical approach O the base rate approach O the validity approach

View Answer

BEST MATCH

QUESTION 7 1 POINT Find the x-intercepts and y-intercept of the following function. f(x) = (x + 7) (x - 5) (3x - 6) Select the correct answer below: x-intercepts: (7,0), (-2, 0), and (-5, 0). y-intercept: (0,0) x-intercepts: (-7,0), (2, 0), and (5,0). y-intercept: (0, -210) x-intercepts: (7,0), (-2, 0), and (-5, 0). y-intercept: (0, 210) x-intercepts: (-7,0), (2, 0), and (5,0). y-intercept: (0, 210) x-intercepts: (7,0), (-2, 0), and (-5,0). y-intercept: (0, -210)

View Answer

BEST MATCH

a student flips a fair, two-sided coins and chooses one card at random from standard deck of 52 cards. which of the following is the probability that the coin lands on tails and they choose a 7?

View Answer

BEST MATCH

Following Figure 1 shows the graph plot of the data on a scatter plot. You ar required to perform k-means clustering with all detailed steps on the given data wit two clusters and randomly selecting the initial centroids were (2,3) and (10,12) base from Figure 1. Remember, to create a table with these data points, in ascending orde of data points. Addition to it, provide drawbacks of using k-means clustering.

View Answer

BEST MATCH

1 Derivative Examples Take the derivative with respect to $x$ of each of the following functions: 1. $f(x) = 4x^2 - 1.5x - 13$ 2. $f(x) = 2x^3 + 3x^2 - 9$ 3. $f(x) = 16\sqrt{x} - 4$ 4. $f(x) = \frac{16}{\sqrt{x}}$ 5. $f(x) = (2x + 3)(3x + 4)$ 6. $f(x) = (3x^2 - 2x)^3$ 7. $f(x) = \frac{2x}{x^2 + 1}$

View Answer

BEST MATCH

The generator in a purely capacitive AC circuit has an angular frequency of 117 \pi rad/s and a maximum voltage of \Delta V_{max} = 139 V. If the capacitance is C = 6.41 \mu F, then what is the RMS current in the circuit?

View Answer

BEST MATCH

(i) Figure 6 below is a standard common-collector, single-stage amplifier. $V_{cc}$ +10 V $R_1$ 18 k$\Omega$ $C_1$ $V_{in}$ 10 $\mu F$ $C_2$ $V_{out}$ $R_2$ 18 k$\Omega$ 10 $\mu F$ $R_E$ 1.0 k$\Omega$ Figure 6 $R_L$ 1.0 k$\Omega$ Determine the mid-band input impedance assuming that the transistor gain $\beta$ =200 at the test frequency used. State any assumptions made.

View Answer

BEST MATCH

K = 1.2x10^6 N/m M = 13 kg RPM = 3100 me = 0.021 kg*m Mab = 4 kg A bench grinder with mass M kg operates at a speed of RPM and was found to shake the stand excessively when directly mounted (only consider vertical motion - up/down). In hopes that mounting the grinder on spring supports would fix the excessive deflection problem, the grinder was mounted to the stand on steel springs with an effective stiffness of K N/m (assume steel springs have low damping). This made the problem worse and the grinder oscillated with excessive vertical vibration. The grinder was found to have a rotating unbalance of me kgâ€¢m. A. What vertical force was being transmitted to the bench before the springs were added? B. What vertical force was being transmitted after the steel springs were added? C. Consider the use of a vibration absorber on the system with the steel springs added (part B) and complete a design for its implementation. a. Looking around the shop, you found a Mab kg mass. Use it in your absorber design. D. How much vertical space is needed around the absorber mass?

View Answer

victoria s.