A 20° full-depth steel spur pinion has 20 teeth and a module of 2 mm and is to transmit 0.5 kW at a speed of 200 rev/min. Find an appropriate face width if the bending stress is not to exceed 75 MPa.
Added by Lidia S.
Step 1
Step 1: Calculate the pitch diameter of the pinion Pitch diameter = module x number of teeth Pitch diameter = 2 mm x 20 teeth Pitch diameter = 40 mm Show more…
Show all steps
Your feedback will help us improve your experience
Madhur L and 65 other Physics 101 Mechanics educators are ready to help you.
Ask a new question
Labs
Want to see this concept in action?
Explore this concept interactively to see how it behaves as you change inputs.
Key Concepts
Recommended Videos
A pair of helical gears with 30° helix angle is used to transmit 15 kW at 10 000 r.p.m. of the pinion. The velocity ratio is 4 : 1. Both the gears are to be made of hardened steel of static strength 100 N/mm2. The gears are 20° stub and the pinion is to have 24 teeth. The face width may be taken as 14 times the module. Find the module and face width from the standpoint of strength and check the gears for wear.
Adi S.
Sri K.
A solid steel shaft in a rolling mill transmits 20 kW of power at 2 Hz. Determine the smallest safe diameter of the shaft if the shear stress τw is not to exceed 40 MPa and the angle of twist θ is limited to 6° in a length of 3 m. Use G = 83 GPa.
Penny R.
Recommended Textbooks
University Physics with Modern Physics
Physics: Principles with Applications
Fundamentals of Physics
Transcript
Watch the video solution with this free unlock.
EMAIL
PASSWORD