A constant boundary generated by the collective effects of the MMC limit of size of a feature and the applicable geometric tolerance is called A boundary condition The virtual condition A feature of size Regardless of feature size
Added by Katrina A.
Close
Step 1
Step 2: Let's analyze the options: * **A boundary condition:** In engineering, a boundary condition specifies the state of a system at its boundaries. While it involves boundaries, it's a general term and doesn't specifically describe the combination of MMC and Show more…
Show all steps
Your feedback will help us improve your experience
Adi S and 69 other Physics 101 Mechanics educators are ready to help you.
Ask a new question
Labs
Want to see this concept in action?
Explore this concept interactively to see how it behaves as you change inputs.
Key Concepts
Recommended Videos
The use of coordinate tolerances for cylindrical holes results in tolerance zones. A. Cylindrical B. Rectangular C. Parallel D. Uniform. 13. To establish a virtual condition (acceptance boundary) is required. A. An (M) symbol in the tolerance portion of a feature control frame. B. An (M) symbol in the datum portion of a feature control frame. C. A diameter symbol in the tolerance portion of a feature control frame. D. All of the above. 8. Where the counterbore symbol is specified, one additional consideration would be. A. The specification of the (SF) symbol. B. The specification of the S symbol. C. The specification of the depth symbol. D. The specification of the symbol. 14. How does Rule #1 affect the application of a flatness tolerance applied to a surface? A. Where Rule #1 exists, flatness cannot be applied. B. The flatness tolerance value must be equal to the size tolerance. C. The flatness tolerance value must be less than the size tolerance. D. The flatness tolerance value must be greater than the size tolerance. 9. What does the (CF) modifier indicate? A. A critical feature. B. A compound feature pattern exists. C. Two features or features of size are to be treated as one feature of size. D. Two surfaces are produced with the same operation(s). 15. Where no geometric tolerances are specified, the worst-case boundary of a hole is referred to as: A. An inner boundary. B. A nominal boundary. C. A virtual condition. D. A related actual mating envelope. 10. Where the countersink symbol is specified, one additional consideration would be. A. To specify a depth. B. To specify the angle. C. To specify a datum reference. D. To specify the origin symbol. 16. The virtual condition of feature of size is a constant boundary generated by the collective effects of the largest feature of size plus the applicable geometric tolerance. A. An internal. B. An external. C. A nominal. D. All of the above. 11. When inspecting a feature of size where Rule #1 applies, two items must be inspected, the MMC boundary and the: A. MMC size. B. LMC local size. C. Minimum size. D. Related actual mating envelope. 17. How many datum reference frames can a part have? A. 1. B. 2. C. 3. D. No limit (theoretically). 12. Which type of surface deviation is controlled by a cylindricity tolerance but not by a circularity tolerance? A. Ovality. B. Taper. C. Lobing. D. None of the above.
Adi S.
Supreeta N.
Madhur L.
Recommended Textbooks
University Physics with Modern Physics
Physics: Principles with Applications
Fundamentals of Physics
Transcript
Watch the video solution with this free unlock.
EMAIL
PASSWORD