Question

1. A pair of gears with 20° full depth teeth are to transmit 7.46 kw at 1750 rpm of the 76 mm pinion; velocity ratio is about 3.8; intermittent service. Use strength reduction factor of about 1.4, with the load at the tip and teeth commercially cut. Determine the pitch, face width, and tooth numbers if the material is cast iron, class 20.

Name: 1. A pair of gears with 20° full depth teeth are to transmit 7.46 kw at 1750 rpm of the 76 mm pinion; velocity ratio is about 3.8; intermittent service. Use strength reduction factor of about 1.4, with the load at the tip and teeth commercially cut. Determine the pitch, face width, and tooth numbers if the material is cast iron, class 20.
Uploaded: 2023-06-15T12:16:11-08:00
Duration: 3 min 59 s
Channel: Madhur L
Description: 1. A pair of gears with 20° full depth teeth are to transmit 7.46 kw at 1750 rpm of the 76 mm pinion; velocity ratio is about 3.8; intermittent service. Use strength reduction factor of about 1.4, with the load at the tip and teeth commercially cut. Determine the pitch, face width, and tooth numbers if the material is cast iron, class 20.

          1. A pair of gears with 20° full depth teeth are to transmit 7.46 kw at 1750 rpm of the 76 mm pinion; velocity ratio is about 3.8; intermittent service. Use strength reduction factor of about 1.4, with the load at the tip and teeth commercially cut. Determine the pitch, face width, and tooth numbers if the material is cast iron, class 20.

1. A pair of gears with 20° full depth teeth are to transmit 7.46 kw at 1750 rpm of the 76 mm pinion; velocity ratio is about 3.8; intermittent service. Use strength reduction factor of about 1.4, with the load at the tip and teeth commercially cut. Determine the pitch, face width, and tooth numbers if the material is cast iron, class 20.

Added by Ronald G.

University Physics with Modern Physics

Hugh D. Young 14th Edition

Instant Answer

Solved by Expert Madhur L

06/15/2023

Step 1

### Part A: Speed of the Driven Gear ** Show more…

Show all steps

Thanks for your feedback!

A pair of gears with 20" full depth teeth are to transmit 7.46 kW at 1750 rpm of the 76 mm pinion; velocity ratio is about 3.8; intermittent service. Use strength reduction factor of about 1.4, with the load at the tip and teeth commercially cut. Determine the pitch, face width, and tooth numbers if the material is cast iron, class 20.