plate 120 mm wide and 10 mm thick is to be welded with another plate by means of both single transverse and double parallel fillets welds. The permissible tensile stress should not exceed 80 MPa and the shear stress is not to exceed 60 MPa. If the applied load is 200 kN, find the length of parallel fillets. (20 P)
Added by Patricia C.
Close
Step 1
Since 1 kN = 1000 N, the applied load is \(200 \text{ kN} \times 1000 \frac{\text{N}}{\text{kN}} = 200,000 \text{ N}\). Show more…
Show all steps
Your feedback will help us improve your experience
Adi S and 99 other Physics 101 Mechanics educators are ready to help you.
Ask a new question
Labs
Want to see this concept in action?
Explore this concept interactively to see how it behaves as you change inputs.
Key Concepts
Recommended Videos
A plate 100 mm wide and 10 mm thick is to be welded with another plate by means of transverse welds at the ends. If the plates are subjected to a load of 70 kN, find the size of weld for static load The permissible tensile stress should not exceed 70 MPa.
Supreeta N.
Madhur L.
Q6. A plate 75 mm wide and 12.5 mm thick is joined with another plate by a single transverse weld and double parallel fillet weld as shown in Fig below. The maximum tensile and shear stresses are 70 MPa and 56 MPa respectively. Find the length of each parallel fillet weld if the joint is subjected to static loading.
Adi S.
Recommended Textbooks
University Physics with Modern Physics
Physics: Principles with Applications
Fundamentals of Physics
Transcript
Watch the video solution with this free unlock.
EMAIL
PASSWORD