00:01
We have a circuit with some capacitors that we can throw a switch in between the battery or between c2 and c1.
00:11
So the switch has two different positions, down and up.
00:16
And at first, we're going to start with both capacitors discharged, and we're going to put the switch down.
00:25
What that will basically do, let me draw a little diagram of what the circuit looks like.
00:32
It's a simple circuit with c2 in it and the battery to that, v -naut.
00:41
But if you let that sit for a long time, c2 will get to the same voltage.
00:49
It will charge up so that the voltage across it, delta v.
00:59
Of v is equal to v -0.
01:06
Okay, and we can use the thing that we'll be using a lot is q equals c -b.
01:14
So we will set up the initial charge on that capacitor, and here's a capacitor relationship.
01:22
We want to keep reminding ourselves of the definition of capacitance is the amount of charge on the plates divided by the voltage across the plates.
01:34
So there will be an initial amount of charge that goes on that capacitor, and it will be determined by the battery voltage.
01:45
Now, if we take the switch and let it go up, then our circuit looks like this.
02:00
C2 is basically going to act like the charging mechanism in a new circuit with c1.
02:08
But we're assuming that that circuit doesn't touch anything in the outside world.
02:14
So what will happen over time is there will be a sharing of charge between the two plates such that the potential difference across both of those plates.
02:29
Let me use a different color.
02:32
B is going to equalize and not the charge.
02:42
The charge will not equalize.
02:43
Because they are different capacitancees.
02:47
But what we do know is that the total plus minus charge has to remain conserved.
02:57
Charge is conserved.
03:01
So whatever charge goes on capacitor 1 plus whatever charge goes on capacitor 2 has to equal the initial charge that went into the capacitor two.
03:18
And let's see.
03:21
Yeah, that's both the positive and negative.
03:23
We don't have to worry too much about, you know, worrying about the two plates separately.
03:30
And they will naturally balance from one side of the plate to the other.
03:35
Okay, so we basically have some algebra to do.
03:38
We've got two equations for the capacitors in this switch -up position.
03:47
We have basically that q1 is equal to c1 times the new voltage, which we don't know.
03:58
And q2 is equal to c2 times the new voltage, which again we don't know.
04:07
But we can certainly take these two equations and divide one into the other, and that will remove the unknown voltage...