• Home
  • Textbooks
  • Schaum’s Outline of College Physics
  • Equivalent Resistance; Simple Circuits

Schaum’s Outline of College Physics

Eugene Hecht

Chapter 28

Equivalent Resistance; Simple Circuits - all with Video Answers

Educators


Chapter Questions

03:51

Problem 1

Derive the formula for the equivalent resistance $R_{\mathrm{eq}}$ of resistors $R_{1}$, $R_{2}$, and $R_{3}(a)$ in series and $(b)$ in parallel, as shown in $\underline{\text
$\underline{1}(a)$ and $(b)$.
(a) For the series network,
$$
V_{a d}=V_{a b}+V_{b c}+V_{c d}=I R_{1}+I R_{2}+I R_{3}
$$
since the current $I$ is the same in all three resistors. Dividing by $I$ gives
$$
\frac{V_{a d}}{I}=R_{1}+R_{2}+R_{3} \quad \text { or } \quad R_{\mathrm{eq}}=R_{1}+R_{2}+R_{3}
$$
since $V_{a d} / I$ is by definition the equivalent resistance $R_{\mathrm{eq}}$ of the network.
(b) The p.d. is the same for all three resistors, whence
$$
I_{1}=\frac{V_{a b}}{R_{1}} \quad I_{2}=\frac{V_{a b}}{R_{2}} \quad I_{3}=\frac{V_{a b}}{R_{3}}
$$
Since the line current $I$ is the sum of the branch currents,
$$
I=I_{1}+I_{2}+I_{3}=\frac{V_{a b}}{R_{1}}+\frac{V_{d b}}{R_{2}}+\frac{V_{a b}}{R_{3}}
$$
Dividing by $V_{a b}$ gives
$$
\frac{I}{V_{a b}}=\frac{1}{R_{1}}+\frac{1}{R_{2}}+\frac{1}{R_{3}} \quad \text { or } \quad \frac{1}{R_{\mathrm{eq}}}=\frac{1}{R_{\mathrm{1}}}+\frac{1}{R_{2}}+\frac{1}{R_{3}}
$$
since $V_{a b} / I$ is by definition the equivalent resistance $R_{\mathrm{eq}}$ of the network.

Ma Ednelyn Lim
Ma Ednelyn Lim
Numerade Educator
03:30

Problem 2

As shown in $\underline a battery (internal resistance $1 \Omega$ ) is connected in series with two resistors. Compute ( $a$ ) the current in the circuit, (b) the p.d. across each resistor, and $(c)$ the terminal
p.d. of the battery.
The circuit is redrawn so as to show the battery resistance. The resistors are in series,
$$
R_{\mathrm{eg}}=5 \Omega+12 \Omega+1 \Omega=18 \Omega
$$
Hence, the circuit is equivalent to the one shown Applying $V=\mathrm{IR}$
$(a)$
$$
I=\frac{V}{R}=\frac{18 \mathrm{~V}}{18 \Omega}=1.0 \mathrm{~A}
$$
(b) Since $I=1.0 \mathrm{~A}$, we can find the p.d. from point- $b$ to point- $c$ as
$$
V_{b c}=I R_{b c}=(1.0 \mathrm{~A})(12 \Omega)=12 \mathrm{~V}
$$
and that from $c$ to $d$ as
$$
V_{c d}=I R_{c d}=(1.0 \mathrm{~A})(5 \Omega)=5 \mathrm{~V}
$$
Notice that $I$ is the same at all points in a series circuit.
(c) The terminal p.d. of the battery is the p.d. from $a$ to $e$. Therefore,
$$
\text { Terminal p.d. }=V_{b c}+V_{c d}=12+5=17 \mathrm{~V}
$$
Or, we could start at $e$ and keep track of the voltage changes as we go through the battery from $e$ to $a$. Taking voltage drops as negative,
Terminal p.d. $=-I r+\varepsilon=-(1.0 \mathrm{~A})(1 \Omega)+18 \mathrm{~V}=17 \mathrm{~V}$

Ma Ednelyn Lim
Ma Ednelyn Lim
Numerade Educator
03:08

Problem 3

A $120-\mathrm{V}$ house circuit has the following light bulbs turned on: $40.0$ $\mathrm{W}, 60.0 \mathrm{~W}$, and $175.0 \mathrm{~W}$. Find the equivalent resistance of these lights.

House circuits are so constructed that each device is connected in parallel with the others. From $\mathrm{P}=V I=V^{2} / R$, for the first bulb
$$
R_{1}=\frac{V^{2}}{P_{1}}=\frac{(120 \mathrm{~V})^{2}}{40.0 \mathrm{~W}}=360 \Omega
$$
Similarly, $R_{2}=240 \Omega$ and $R_{3}=192 \Omega$. Because devices in a house circuit are in parallel,
$$
\frac{1}{R_{\mathrm{eq}}}=\frac{1}{360 \Omega}+\frac{1}{240 \Omega}+\frac{1}{192 \Omega} \quad \text { or } \quad R_{\mathrm{eq}}=82.3 \Omega
$$
As a check, note that the total power drawn from the line is $40.0$ $\mathrm{W}+60.0 \mathrm{~W}+75.0 \mathrm{~W}=75.0 \mathrm{~W}$. Then, using $\mathrm{P}=V^{2} / R$
$$
R_{\mathrm{eq}}=\frac{V^{2}}{\text { total power }}=\frac{(120 \mathrm{~V})^{2}}{175.0 \mathrm{~W}}=82.3 \Omega
$$

Ma Ednelyn Lim
Ma Ednelyn Lim
Numerade Educator
01:27

Problem 4

What resistance must be placed in parallel with $12 \Omega$ to obtain a combined resistance of $4 \Omega$ ?
From
$$
\frac{1}{R_{\mathrm{eq}}}=\frac{1}{R_{1}}+\frac{1}{R_{2}}
$$
we have
$$
\frac{1}{4 \Omega}=\frac{1}{12 \Omega}+\frac{1}{R_{2}}
$$
and si
$$
R_{2}=6 \Omega
$$

Ma Ednelyn Lim
Ma Ednelyn Lim
Numerade Educator
02:21

Problem 5

Several $40-\Omega$ resistors are to be connected so that 15 A flows from a 120 - $\mathrm{V}$ source. How can this be done?

The equivalent resistance must be such that 15 A flows from 120
V. Thus,
$$
R_{\text {eq }}=\frac{V}{I}=\frac{120 \mathrm{~V}}{15 \mathrm{~A}}=8 \Omega
$$
The resistors must be in parallel, since the combined resistance is to be smaller than any of them. If the required number of $40-\Omega$ resistors is $n$, then
$$
\frac{1}{80 \Omega}=n\left(\frac{1}{40 \Omega}\right) \quad \text { or } \quad n=5
$$

Ma Ednelyn Lim
Ma Ednelyn Lim
Numerade Educator
10:12

Problem 6

For each circuit shown, determine the current $I$ through the battery.
(a) The $3.0-\Omega$ and $7.0-\Omega$ resistors are in parallel; their joint resistance $R_{1}$ is found from
$$
\frac{1}{R_{1}}=\frac{1}{3.0 \Omega}+\frac{1}{7.0 \Omega}=\frac{10}{21 \Omega} \quad \text { or } \quad R_{1}=2.1 \Omega
$$
Then the equivalent resistance of the entire circuit is
$$
R_{\mathrm{eq}}=2.1 \Omega+5.0 \Omega+0.4 \Omega=7.5 \Omega
$$
and the battery current is
$$
I=\frac{\mathscr{E}}{R_{\mathrm{eq}}}=\frac{30 \mathrm{~V}}{7.5 \Omega}=4.0 \mathrm{~A}
$$
(b) The $7.0-\Omega, 1.0-\Omega$, and $10.0-\Omega$ resistors are in series; their joint resistance is $18.0 \Omega$. Then $18.0 \Omega$ is in parallel with $6.0 \Omega$; their
combined resistance $R_{1}$ is given by
$$
\frac{1}{R_{1}}=\frac{1}{18.0 \Omega}+\frac{1}{6.0 \Omega} \quad \text { or } \quad R_{1}=4.5 \Omega
$$
Hence, the equivalent resistance of the entire circuit is
$$
R_{\mathrm{eq}}=4.5 \Omega+2.0 \Omega+8.0 \Omega+0.3 \Omega=14.8 \Omega
$$
and the battery current is
$$
I=\frac{8}{R_{\mathrm{cq}}}=\frac{20 \mathrm{~V}}{14.8 \Omega}=1.4 \mathrm{~A}
$$
(c) The $5.0-\Omega$ and $19.0-\Omega$ resistors are in series; their joint resistance is $24.0 \Omega$. Then $24.0 \Omega$ is in parallel with $8.0 \Omega$; their joint resistance $R_{1}$ is given by
$$
\frac{1}{R_{1}}=\frac{1}{24.0 \Omega}+\frac{1}{8.0 \Omega} \quad \text { or } \quad R_{1}=6.0 \Omega
$$
Now $R_{1}=6.0 \Omega$ is in series with $15.0 \Omega$; their joint resistance is $6.0 \Omega+15.0 \Omega=21.0 \Omega$. Thus, $21.0 \Omega$ is in parallel with $9.0 \Omega$; their combined resistance is found from
$$
\frac{1}{R_{2}}=\frac{1}{21.0 \Omega}+\frac{1}{9.0 \Omega} \quad \text { or } \quad R_{2}=6.3 \Omega
$$
Hence, the equivalent resistance of the entire circuit is
$$
R_{\mathrm{eq}}=6.3 \Omega+2.0 \Omega+0.2 \Omega=8.5 \Omega
$$
and the battery current is
$$
I=\frac{8}{R_{\mathrm{eq}}}=\frac{17 \mathrm{~V}}{8.5 \Omega}=2.0 \mathrm{~A}
$$

Shelby Mohamed
Shelby Mohamed
Numerade Educator
02:06

Problem 7

For the circuit shown find the current in each resistor and the current drawn from the 40 - $V$ source.
Notice that the p.d. from $a$ to $b$ is $40 \mathrm{~V}$. Therefore, the p.d. across each resistor is $40 \mathrm{~V}$. Then,
$$
I_{2}=\frac{40 \mathrm{~V}}{2.0 \Omega}=20 \mathrm{~A} \quad I_{5}=\frac{40 \mathrm{~V}}{5.0 \Omega}=8.0 \mathrm{~A} \quad I_{8}=\frac{40 \mathrm{~V}}{8.0 \Omega}=5.0 \mathrm{~A}
$$
Because $I$ splits into three currents:
$$
I=I_{2}+I_{5}+I_{8}=20 \mathrm{~A}+8.0 \mathrm{~A}+5.0 \mathrm{~A}=33 \mathrm{~A}
$$

Ma Ednelyn Lim
Ma Ednelyn Lim
Numerade Educator
05:53

Problem 8

In the battery has an internal resistance of $0.7 \Omega$. Find $(a)$ the current drawn from the battery, $(b)$ the current in each $5-\Omega$ resistor, and ( $c$ ) the terminal voltage of the battery.
(a) First we'll have to find the equivalent resistance of the entire circuit, and with that and Ohm's Law, determine the current. For parallel group resistance $R_{1}$ we have
$$
\frac{1}{R_{1}}=\frac{1}{15 \Omega}+\frac{1}{15 \Omega}+\frac{1}{15 \Omega}=\frac{3}{15 \Omega} \quad \text { or } \quad R_{1}=5.0 \text { }
$$
Ther
$$
R_{e q}=5.0 \Omega+0.3 \Omega+0.7 \Omega=6.0 \Omega
$$
and
$$
I=\frac{\varepsilon}{R_{e_{\mathrm{eq}}}}=\frac{24 \mathrm{~V}}{6.0 \Omega}=4.0 \mathrm{~A}
$$
(b) Method 1 1
The three-resistor combination is equivalent to $R_{1}=5.0 \Omega$. A current of $4.0$ A flows through it. Hence, the p.d. across the combination is
$$
I R=(4.0 \mathrm{~A})(5.0 \Omega)=20 \mathrm{~V}
$$
This is also the p.d. across each $15-\Omega$ resistor. Therefore, the current through each $15-\Omega$ resistor is
$$
I_{15}=\frac{V}{R}=\frac{20 \mathrm{~V}}{15 \Omega}=1.3 \mathrm{~A}
$$
Method 2
In this special case, we know that one-third of the current will go through each $15-\Omega$ resistor. Hence,
$$
I_{15}=\frac{4.0 \mathrm{~A}}{3}=1.3 \mathrm{~A}
$$
(c) Start at $a$ and go to $b$ outside the battery:
$V$ from $a$ to $b=-(4.0 \mathrm{~A})(0.3 \Omega)-(4.0 \mathrm{~A})(5.0 \Omega)=-21.2 \mathrm{~V}$
The terminal p.d. of the battery is $21.2 \mathrm{~V}$. Or, we could write for this case of a discharging battery,
Terminal p.d. $=\varepsilon-I r=24 \mathrm{~V}-(4.0 \mathrm{~A})(0.7 \Omega)=21.2 \mathrm{~V}$

Ma Ednelyn Lim
Ma Ednelyn Lim
Numerade Educator
03:40

Problem 9

Find the equivalent resistance between points- $a$ and $-b$ for the combination shown
The $3.0-\Omega$ and $2.0-\Omega$ resistors are in series and are equivalent to a 5.0-\Omega resistor. The equivalent $5.0 \Omega$ is in parallel with the $6.0 \Omega$, and their equivalent, $R_{1}$, is
$$
\frac{1}{R_{1}}=\frac{1}{5.0 \Omega}+\frac{1}{6.0 \Omega}=0.20+0.167=0.367 \Omega^{-1} \quad \text { or } \quad R_{1}=2.73 \Omega
$$
The circuit thus far reduced is shown
The $7.0 \Omega$ and $2.73 \Omega$ are equivalent to $9.73 \Omega$. Now the $5.0 \Omega$, $12.0 \Omega$, and $9.73 \Omega$ are in parallel, and their equivalent, $R_{2}$, is
$$
\frac{1}{R_{2}}=\frac{1}{5.0 \Omega}+\frac{1}{12.0 \Omega}+\frac{1}{9.73 \Omega}=0.386 \Omega^{-1} \quad \text { or } \quad R_{2}=2.6 \Omega
$$
This $2.6 \Omega$ is in series with the $9.0-\Omega$ resistor. Therefore, the equivalent resistance of the combination is $9.0 \Omega+2.6 \Omega=11.6$ $\Omega$

Ma Ednelyn Lim
Ma Ednelyn Lim
Numerade Educator
03:29

Problem 10

A current of $5.0$ A flows into the circuit in point- $a$ and out at point-b. (a) What is the potential difference from $a$ to b? (b) How much current flows through the $12.0-\Omega$ resistor?
we found that the equivalent resistance for this combination is $11.6 \Omega$, and we are told the current through it is 5.0 A.
(a) Voltage drop from $a$ to $b=I R_{\mathrm{eq}}=(5.0 \mathrm{~A})(11.6 \Omega)=58 \mathrm{~V}$
(b) The voltage drop from $a$ to $c$ is $(5.0 \mathrm{~A})(9.0 \Omega) 45 \mathrm{~V}$. Hence, from part $(a)$, the voltage drop from $c$ to $b$ is
$$
58 \mathrm{~V}-45 \mathrm{~V}=13 \mathrm{~V}
$$
and the current in the $12.0-\Omega$ resistor is
$$
I_{12}=\frac{V}{R}=\frac{13 \mathrm{~V}}{12 \Omega}=1.1 \mathrm{~A}
$$

Ma Ednelyn Lim
Ma Ednelyn Lim
Numerade Educator
02:52

Problem 11

As shown the current $I$ divides into $I_{1}$ and $I_{2}$. Find $I_{1}$
and $I_{2}$ in terms of $R_{1}$, and $R_{2}$.
The potential drops across $R_{1}$ and $R_{2}$ are the same because the resistors are in parallel, so
$$
I_{1} R_{1}=I_{2} R_{2}
$$
But $I=I_{1}+I_{2}$ and so $I_{2}=I-I_{1} .$ Substituting in the first equation gives
$$
I_{1} R_{1}=\left(I-I_{1}\right) R_{2}=I R_{2}-I_{1} R_{2} \quad \text { or } \quad I_{1}=\frac{R_{2}}{R_{1}+R_{2}} I
$$
Using this result together with the first equation gives
$$
I_{2}=\frac{R_{1}}{R_{2}} I_{1}=\frac{R_{1}}{R_{1}+R_{2}} I
$$

Ma Ednelyn Lim
Ma Ednelyn Lim
Numerade Educator
04:02

Problem 12

Find the potential difference between points- $P$ and $-Q$ Which point is at the higher potential?
From the result of the currents through $P$ and $Q$ are
$$
\begin{array}{l}
I_{P}=\frac{2 \Omega+18 \Omega}{10 \Omega+5 \Omega+2 \Omega+18 \Omega}(7.0 \mathrm{~A})=4.0 \mathrm{~A} \\
I_{Q}=\frac{10 \Omega+5 \Omega}{10 \Omega+5 \Omega+2 \Omega+18 \Omega}(7.0 \mathrm{~A})=3.0 \mathrm{~A}
\end{array}
$$
Now we start at point- $P$ and go through point- $a$ to point- $Q$, to find
Voltage change from $P$ to $Q=+(4.0 \mathrm{~A})(10 \Omega)-(3.0 \mathrm{~A})(2 \Omega)=+34 \mathrm{~V}$
(Notice that we go through a potential rise from $P$ to $a$ because we are going against the current. From $a$ to $Q$ there is a drop.) Therefore, the voltage difference between $P$ and $Q$ is $34 \mathrm{~V}$, with $Q$ being at the higher potential.

Ma Ednelyn Lim
Ma Ednelyn Lim
Numerade Educator
08:51

Problem 13

For the circuit of find $(a) I_{1} I_{2}$, and $I_{3} ;(b)$ the current in the $12-\Omega$ resistor.
a) The circuit reduces at once to that shown.There we have $24 \Omega$ in parallel with $12 \Omega$, so the equivalent resistance below points- $a$ and $-b$ is
$$
\frac{1}{R_{a b}}=\frac{1}{24 \Omega}+\frac{1}{12 \Omega}=\frac{3}{24 \Omega} \quad \text { or } \quad R_{a b}=8.0 \Omega
$$
Adding to this the $1.0-\Omega$ internal resistance of the battery gives a total equivalent resistance of $9.0 \Omega$. To find the current from the battery, we write
$$
I_{2}=\frac{\mathscr{E}}{R_{\mathrm{eq}}}=\frac{27 \mathrm{~V}}{9.0 \Omega}=3.0 \mathrm{~A}
$$
This same current flows through the equivalent resistance below $a$ and $b$, and so
p.d. from $a$ to $b=$ p.d. from $c$ to $d=I_{1} R_{a b}=(3.0 \mathrm{~A})(8.0 \Omega)=24 \mathrm{~V}$
Applying $V=I R$ to branch $c d$ gives
Similarly,
$$
\begin{array}{l}
I_{2}=\frac{V_{c d}}{R_{c d}}=\frac{24 \mathrm{~V}}{24 \Omega}=1.0 \mathrm{~A} \\
I_{3}=\frac{V_{g h}}{R_{g h}}=\frac{24 \mathrm{~V}}{12 \Omega}=2.0 \mathrm{~A}
\end{array}
$$
As a check, note that $I_{2}+I_{3}=3.0 \mathrm{~A}=I_{1}$, as it should be.
(b) Because $I_{2}=1.0 \mathrm{~A}$, the p.d. across the $2.0-\Omega$ resistor in $\underline{\text { Fig. } 28-}$ $\underline{9}(b)$ is $(1.0 \mathrm{~A})(2.0 \Omega)=2.0 \mathrm{~V}$. But this is also the p.d. across the $12-\Omega$ resistor in Fig. $28-9(a) .$ Applying $V=I R$ to the $12 \Omega$ gives
$$
I_{12}=\frac{V_{12}}{R}=\frac{2.0 \mathrm{~V}}{12 \Omega}=0.17 \mathrm{~A}
$$

Shelby Mohamed
Shelby Mohamed
Numerade Educator
02:08

Problem 14

A galvanometer has a resistance of $400 \Omega$ and deflects full scale for a current of $0.20 \mathrm{~mA}$ through it. How large a shunt resistor is required to change it to a 3.0-A ammeter?
We label the galvanometer $\mathrm{G}$ and the shunt resistance $R_{s}$. At full-scale deflection, the currents are as shown:
The voltage drop from $a$ to $b$ across $\mathrm{G}$ is the same as that across $R_{s} .$ Therefore,
$$
(2.9998 \mathrm{~A}) R_{\mathrm{s}}=\left(2.0 \times 10^{-4} \mathrm{~A}\right)(400 \Omega)
$$
from which $R_{s}=0.027 \Omega$.

Ma Ednelyn Lim
Ma Ednelyn Lim
Numerade Educator
03:09

Problem 15

A voltmeter is to deflect full scale for a potential difference of $5.000 \mathrm{~V}$ across it and is to be made by connecting a resistor $R_{x}$ in series with a galvanometer. The $80.00-\Omega$ galvanometer deflects full scale for a potential of $20.00 \mathrm{mV}$ across it. Find $R_{x^{\circ}}$
When the galvanometer is deflecting full scale, the current
through it is
$$
I=\frac{V}{R}=\frac{20.00 \times 10^{-3} \mathrm{~V}}{80.00 \Omega}=2.500 \times 10^{-4} \mathrm{~A}
$$
When $R_{x}$ is connected in series with the galvanometer, we wish $I$ to be $2.500 \times 10^{-4} \mathrm{~A}$ for a potential difference of $5.000 \mathrm{~V}$ across the combination. Hence, $V=I R$ becomes
$$
5.000 \mathrm{~V}=\left(2.500 \times 10^{-4} \mathrm{~A}\right)\left(80.00 \Omega+R_{x}\right)
$$
from which $R_{x}=19.92 \mathrm{k} \Omega$.

Ma Ednelyn Lim
Ma Ednelyn Lim
Numerade Educator
05:08

Problem 16

The currents in the circuit are steady. Find $I_{1}, I_{2}, I_{3}$, and the charge on the capacitor.
When a capacitor has a constant charge, as it does here, the current flowing to it is zero. Therefore, $I_{2}=0$, and the circuit behaves just as though the center wire were missing.
With the center wire missing, the remaining circuit is simply 12 $\Omega$ connected across a 15 -V battery. Therefore,
$$
I_{1}=\frac{\varepsilon}{R}=\frac{15 \mathrm{~V}}{12 \Omega}=1.25 \mathrm{~A}
$$
In addition, because $I_{2}=0$, we have $I_{3}=I_{1}=1.3 \mathrm{~A}$.
To find the charge on the capacitor, first find the voltage difference between points- $a$ and $-b$. Start at $a$ and go around the upper path.
Voltage change from $a$ to $b=-(5.0 \Omega) I_{3}+6.0 \mathrm{~V}+(3.0 \Omega) I_{2}$
$$
=-(5.0 \Omega)(1.25 \mathrm{~A})+6.0 \mathrm{~V}+(3.0 \Omega)(0)=-0.25 \mathrm{~V}
$$
Therefore, $b$ is at the lower potential and the capacitor plate at $b$ is negative. To find the charge on the capacitor,
$$
Q=C V_{a b}=\left(2 \times 10^{-6} \mathrm{~F}\right)(0.25 \mathrm{~V})=0.5 \mu \mathrm{C}
$$

Emily Anderson
Emily Anderson
Numerade Educator
01:58

Problem 17

Find the ammeter reading and the voltmeter reading in the circuit . Assume both meters to be ideal.
The ideal voltmeter has infinite resistance, and so its wire can be removed without altering the circuit. The ideal ammeter has zero resistance. It can be shown that batteries in series simply add or subtract. The two $6.0$ -V batteries cancel each other because they tend to push current in opposite directions. As a result, the circuit behaves as though it had a single $8.0-\mathrm{V}$ battery that causes a clockwise current.
The equivalent resistance is $3.0 \Omega+4.0 \Omega+9.0 \Omega=16.0 \Omega$, and the equivalent battery is $8.0 \mathrm{~V}$. Therefore,
$$
I_{1}=\frac{\mathscr{E}}{R}=\frac{15 \mathrm{~V}}{12 \Omega}=1.25 \mathrm{~A}
$$
and this is what the ammeter will read.
Adding up the voltage changes from $a$ to $b$ around the right-hand side of the circuit gives
Voltage change from $a$ to $b=-6.0 \mathrm{~V}+8.0 \mathrm{~V}-(0.50 \mathrm{~A})(9.0 \Omega)=-2.5 \mathrm{~V}$
Therefore, a voltmeter connected from $a$ to $b$ will read $2.5 \mathrm{~V}$, with $b$ being at the lower potential.

Suzanne W.
Suzanne W.
Numerade Educator
01:42

Problem 18

Compute the equivalent resistance of $4.0 \Omega$ and $8.0 \Omega(a)$ in series and $(b)$ in parallel.

Ma Ednelyn Lim
Ma Ednelyn Lim
Numerade Educator
03:14

Problem 19

Compute the equivalent resistance of $(a) 3.0 \Omega, 6.0 \Omega$, and $9.0 \Omega$ in parallel; (b) $3.0 \Omega, 4.0 \Omega, 7.0 \Omega, 10.0 \Omega$, and $12.0 \Omega$ in parallel;
(c) three 33-\Omega heating elements in parallel; $(d$ ) twenty $100-\Omega$ lamps in parallel.

Ma Ednelyn Lim
Ma Ednelyn Lim
Numerade Educator
01:28

Problem 20

What resistance must be placed in parallel with $20 \Omega$ to make the combined resistance $15 \Omega ?$

Ma Ednelyn Lim
Ma Ednelyn Lim
Numerade Educator
01:57

Problem 21

How many $160-\Omega$ resistors (in parallel) are required to carry a total of $5.0 \mathrm{~A}$ on a $100-\mathrm{V}$ line?

Ma Ednelyn Lim
Ma Ednelyn Lim
Numerade Educator
02:55

Problem 22

Three resistors, of $8.0 \Omega, 12 \Omega$, and $24 \Omega$, are in parallel, and a current of $20 \mathrm{~A}$ is drawn by the combination. Determine $(a)$ the potential difference across the combination and $(b)$ the current through each resistance.

Ma Ednelyn Lim
Ma Ednelyn Lim
Numerade Educator
08:01

Problem 23

By use of one or more of the three resistors $3.0 \Omega, 5.0 \Omega$, and $6.0$ $\Omega$, a total of 18 resistances can be obtained. What are they?

Shelby Mohamed
Shelby Mohamed
Numerade Educator
04:09

Problem 24

Two resistors, of $4.00 \Omega$ and $12.0 \Omega$, are connected in parallel across a 22-V battery having internal resistance $1.00 \Omega$. Compute
(a) the battery current, $(b)$ the current in the $4.00-\Omega$ resistor, $(c)$ the terminal voltage of the battery, $(d)$ the current in the $12.0-\Omega$ resistor.

Paul Gabriel
Paul Gabriel
Numerade Educator
05:49

Problem 25

Three resistors, of $40 \Omega, 60 \Omega$, and $120 \Omega$, are connected in parallel, and this parallel group is connected in series with $15 \Omega$ in series with $25 \Omega$. The whole system is then connected to a 120 $\mathrm{V}$ source. Determine $(a)$ the current in the $25 \Omega,(b)$ the potential drop across the parallel group, (c) the potential drop across the 25 $\Omega,(d)$ the current in the $60 \Omega,(e)$ the current in the $40 \Omega$.

Emily Anderson
Emily Anderson
Numerade Educator
02:35

Problem 26

What shunt resistance should be connected in parallel with an ammeter having a resistance of $0.040 \Omega$ so that 25 percent of the total current will pass through the ammeter?

Shelby Mohamed
Shelby Mohamed
Numerade Educator
01:42

Problem 27

A $36-\Omega$ galvanometer is shunted by a resistor of $4.0 \Omega$. What part of the total current will pass through the instrument?

Ma Ednelyn Lim
Ma Ednelyn Lim
Numerade Educator
02:06

Problem 28

A relay having a resistance of $6.0 \Omega$ operates with a minimum current of $0.030 \mathrm{~A}$. It is required that the relay operate when the current in the line reaches $0.240 \mathrm{~A}$. What resistance should be used to shunt the relay?

Shelby Mohamed
Shelby Mohamed
Numerade Educator
01:08

Problem 29

Show that if two resistors are connected in parallel, the rates at which they produce thermal energy vary inversely as their resistances.

Suzanne W.
Suzanne W.
Numerade Educator
04:00

Problem 30

For the circuit shown in Fig. $28-13$, find the current through each resistor and the potential drop across each resistor.

Shelby Mohamed
Shelby Mohamed
Numerade Educator
08:34

Problem 31

For the circuit shown find $(a)$ its equivalent resistance; $(b)$ the current drawn from the power source; $(c)$ the potential differences across $a b, c d$, and $d e ;(d)$ the current in each resistor.

Emily Anderson
Emily Anderson
Numerade Educator
05:37

Problem 32

It is known that the potential difference across the $6.0-\Omega$ resistance is $48 \mathrm{~V}$. Determine $(a)$ the entering current $I,(b)$ the potential difference across the $8.0-\Omega$ resistance,
( $c$ ) the potential difference across the $10-\Omega$ resistance, $(d)$ the potential difference from $a$ to b. [Hint: The wire connecting $c$ and $d$ can be shrunk to zero length without altering the currents or

Emily Anderson
Emily Anderson
Numerade Educator
03:38

Problem 33

In the circuit shown in $\underline{\text 23.9$ calories of thermal energy are produced each second in the $4.0-\Omega$ resistor. Assuming the ammeter and two voltmeters to be ideal, what will be their readings?

Suzanne W.
Suzanne W.
Numerade Educator
09:28

Problem 34

For the entire circuit shown, find $(a)$ the equivalent resistance; $(b)$ the currents through the $5.0-\Omega, 7.0-\Omega$, and $3.0-\Omega$ resistors; ( $c$ ) the total power delivered by the battery to the external circuit.

Emily Anderson
Emily Anderson
Numerade Educator
02:16

Problem 35

In the circuit shown the ideal ammeter registers $2.0$
A. ( $a$ ) Assuming $X Y$ to be a resistance, find its value. (b) Assuming $X Y$ to be a battery (with $2.0-\Omega$ internal resistance) that ? being charged, find its emf. (c) Under the conditions of part
(b), what is the potential change from point- $Y$ to point- $X$ ?

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
01:09

Problem 36

The Wheatstone bridge shown is being used to measure resistance $X$. At balance, the current through the galvanometer $\mathrm{G}$ is zero and resistances $L, M$, and $N$ are $3.0 \Omega, 2.0$ $\Omega$, and $10 \Omega$, respectively. Find the value of $X$.

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
00:34

Problem 37

The slidewire Wheatstone bridge shown is balanced when the uniform resistive slide wire $A B$ is divided as shown. Find the value of the resistance $X$.

Khoobchandra Agrawal
Khoobchandra Agrawal
Numerade Educator
06:28

Problem 38

Referring to the circuit determine $(a)$ the equivalent resistance, $(b)$ the current that flows through $R_{5},(c)$ the current that flows through $R_{1},(d)$ the current that flows through $R_{7}$, ( $e$ ) the power dissipated by $R_{5}$, $(f)$ the voltage across $R_{2}$, and $(g)$ the power supplied by the battery.

Emily Anderson
Emily Anderson
Numerade Educator
03:13

Problem 39

Referring to the circuit determine $(a)$ the equivalent resistance between terminals A and B. If a 15.0-V dc power supply were placed across $A$ and $B,(b)$ how much current would flow through the $1.0-\Omega$ resistor? $(c)$ Calculate the net power that would be dissipated by all the resistors.

Mayukh Banik
Mayukh Banik
Numerade Educator