00:01
Okay, so we're doing chapter 26 problem 75.
00:04
So it says a solar cell, solar cell, not sail, solar cell three centimeters squared.
00:10
So three by three centimeters cell has an output of 350 milamps at 8 .4, or 8 .8 volts.
00:23
Sorry, and we can't talk very well right now.
00:25
So output of 350 millimet at 0 .8 volts.
00:33
And it says a solar panel that delivers close to 1 .3 amps of a current at an emf 120 volts to an external load is needed.
00:45
So we need 1 .3 amps at 120 volts.
00:56
How many cells will you need to create this panel? okay, so to build up a higher voltage, we know we put the cells in series.
01:08
And if we need 120 volts from a series of cells, and each cell is 0 .8 volts per cell, we just divide that, and we see that we need roughly 150 cells to provide the voltage.
01:24
Since all of these cells are the same, they're going to have this, or all in series, they're going to all have the same current going through them.
01:33
Current of 350 millimet.
01:40
To achieve the higher current now, we need to make banks of these cells that can all be connected in parallel.
01:52
So if we have cells or banks of cells in parallel from each other, then their currents are going to add.
02:05
So if we take, we need a 1 .3 amps of current and we're getting 350 millip amps per bank...