In the figure, the input is across B and D and output is across A and C. The output is (A) same

step 1 So in this question, input is across, input is across terminal A and C and output is across B an

In the figure, the input is across B and D and output is...

Labs

Want to see this concept in action?

NEW

Explore this concept interactively to see how it behaves as you change inputs.

View Labs

Key Concepts

Rectification

Rectification is the process of converting an alternating current (AC) into a direct current (DC) by allowing current through in only one direction. This is accomplished using components like diodes that permit current flow during one half-cycle of the AC waveform or both halves, depending on the configuration.

Half-Wave Rectification

Half-wave rectification involves using only one half (either positive or negative) of the AC input signal to produce a DC output. This method typically wastes one half of the waveform, resulting in a pulsating DC output that may require additional filtering to smooth out the pulsations.

Full-Wave Rectification

Full-wave rectification uses both halves of the AC input signal to produce a DC output. In circuit configurations such as a diode bridge, the negative half-cycle of the input is inverted so that it contributes to the output, resulting in a more efficient and smoother DC waveform compared to half-wave rectification.

Bridge Rectifier

A bridge rectifier is a specific circuit configuration that employs four diodes arranged in a bridge to achieve full-wave rectification. This configuration allows for the entire AC waveform to be converted into pulsating DC, making it a common choice in power supplies and other applications requiring efficient AC to DC conversion.

Please give Ace some feedback