In your company, there is a general-purpose copier at each level, which needs to undergo a 2-
minute warm-up period to allow the ink to reach the required temperature for printing. The
copier is limited to 100 copies initially, and after this limit, you must obtain permission to make
an additional 50 copies.
Objectives:
1. Ensure that the heating process (warm-up = 2 minutes) for the ink takes place before
any copying can occur.
2. Once the heating process is completed, a green light should turn ON, signaling that the
copier is ready to make 100 copies.
3. Once the copier reaches 100 copies, a red light will turn ON for 5 minutes to signal the
user to reset the counter and request permission to make an additional 50 copies.
