12. NC Exercise 4.36 Construct a quantum circuit to add two two-bit numbers x and y modulo 4. That is, the circuit should perform the transformation |x, y⟩ → |x, x + y mod 4⟩.
Added by Steven L.
Step 1
To construct a quantum circuit that adds two two-bit numbers \( x \) and \( y \) modulo 4, we will follow these steps: Show more…
Show all steps
Your feedback will help us improve your experience
Adi S and 54 other AP CS educators are ready to help you.
Ask a new question
Labs
Want to see this concept in action?
Explore this concept interactively to see how it behaves as you change inputs.
Key Concepts
Recommended Videos
7. Modify the quantum dense coding protocol so that it works for the following initial shared states: (a) |Ψ+⟩ (b) |Φ+⟩ (c) |Φ-⟩
Adi S.
Design and draw a sequential circuit having one input X and one output that implements the behavior shown in Table 1. Name inputs and outputs of the circuit as shown in Figure 1 (X, RST, clk, Y). State S0 should be coded as 00. Very important note: The VerilUOC_Desktop verifier requires that all inputs of the flip flops are connected to some value. So, it is necessary to connect "S" inputs to 0 and "load" inputs to 1. To do so, click in "wiring", select "Constant" and connect the constant (a logical 1) to the "load" inputs. Repeat the process and, in the Value property of the left menu, replace the 0x1 by 0x0 (this will set the constant to 0). Connect the resulting constant to the "S" inputs. Instructions to answer this question: 1) In the virtual machine, open VerilUOC_Desktop and draw the circuit. 2) Click in "Simulate"->"Verification" and then click in the VerilCirc tab. 3) In "Module" select "Graded Exercises" and click on exercise 5.6.a. 4) VerilCirc returns a 4 uppercase letters code. Type it in the answer box.
Akash M.
This problem requires you to design a module with five input bits m, x1, x0, y1, y0 and four output bits z3, z2, z1, z0. Bits x1, x0 are interpreted as a 2-bit binary number X. For example, if x1 = 1 and x0 = 0, then X = x1x0 = 10 = 2. On the other hand, if m (or mode bit) decides whether your logic works as an adder or a multiplier as described below. Adder mode (m = 1): Here the output z3z2z1z0 is a 4-bit number Z that represents the arithmetic sum X + Y. For example, if X = 2 and Y = 3, then when m = 1, the circuit will output Z = X + Y = 2 + 3 = 5 = 0101 = z3z2z1z0; that is, z2 = z0 = 1 and z3 = z1 = 0. Multiplier mode (m = 0): Here the output z3z2z1z0 is a 4-bit number Z that represents the arithmetic product X Y. For example, if X = 2 and Y = 3, then when m = 0, the circuit will output Z = X Y = 2 3 = 6 = 0110 = z3z2z1z0; that is, z2 = z1 = 1 and z3 = z0 = 0. (a) Draw a truth table for the functions z3(m, x1, x0, y1, y0), z2(m, x1, x0, y1, y0), z1(m, x1, x0, y1, y0), and z0(m, x1, x0, y1, y0) described above. To keep things clear, split the truth table into two 4-variable truth tables, one for m = 0 and the other for m = 1. (b) Use 5-variable Karnaugh maps to derive minimal SOP forms for z3, z2, z1, z0. (c) Draw a circuit for the hardware module in this problem.
Recommended Textbooks
Computer Science and Information Technology
Introduction to Programming Using Python
Computer Science - An Overview
Transcript
18,000,000+
Students on Numerade
Trusted by students at 8,000+ universities
Watch the video solution with this free unlock.
EMAIL
PASSWORD