• Home
  • Textbooks
  • College Physics
  • Thermodynamics

College Physics

Paul Peter Urone, Roger Hinrichs

Chapter 15

Thermodynamics - all with Video Answers

Educators


Chapter Questions

01:11

Problem 1

What is the change in internal energy of a car if you put 12.0 gal of gasoline into its tank? The energy content of gasoline is $1.3 \times 10^{8} \mathrm{J} / \mathrm{gal} .$ All other factors, such as the car's temperature, are constant.

cm
Charles Magnusen
Numerade Educator
00:49

Problem 2

How much heat transfer occurs from a system, if its internal energy decreased by 150 J while it was doing $30.0 \mathrm{J}$ of work?

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
00:41

Problem 3

A system does $1.80 \times 10^{8} \mathrm{J}$ of work while $7.50 \times 10^{8} \mathrm{J}$ of heat transfer occurs to the environment. What is the change in internal energy of the system assuming no other changes (such as in temperature or by the addition of fuel)?

Jordan Gassaway
Jordan Gassaway
Numerade Educator
02:13

Problem 4

What is the change in internal energy of a system which does $4.50 \times 10^{5} \mathrm{J}$ of work while $3.00 \times 10^{6} \mathrm{J}$ of heat transfer occurs into the system, and $8.00 \times 10^{6} \mathrm{J}$ of heat transfer occurs to the environment?

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
01:21

Problem 5

Suppose a woman does $500 \mathrm{J}$ of work and $9500 \mathrm{J}$ of heat transfer occurs into the environment in the process. (a) What is the decrease in her internal energy, assuming no change in temperature or consumption of food? (That is, there is no other energy transfer.) (b) What is her efficiency?

cm
Charles Magnusen
Numerade Educator
01:29

Problem 6

(a) How much food energy will a man metabolize in the process of doing $35.0 \mathrm{kJ}$ of work with an efficiency of $5.00 \% ?$
(b) How much heat transfer occurs to the environment to keep his temperature constant? Explicitly show how you follow the steps in the Problem-Solving Strategy for thermodynamics found in Problem-Solving Strategies for Thermodynamics.

Jordan Gassaway
Jordan Gassaway
Numerade Educator
03:02

Problem 7

(a) What is the average metabolic rate in watts of a man who metabolizes $10,500 \mathrm{kJ}$ of food energy in one day? (b) What is the maximum amount of work in joules he can do without breaking down fat, assuming a maximum efficiency of $20.0 \% ?(\mathrm{c})$ Compare his work output with the daily output of a 187-W (0.250-horsepower) motor.

Jordan Gassaway
Jordan Gassaway
Numerade Educator
01:27

Problem 8

a) How long will the energy in a $1470-\mathrm{kJ}(350-\mathrm{kcal})$ cup of yogurt last in a woman doing work at the rate of $150 \mathrm{W}$ with an efficiency of $20.0 \%$ (such as in leisurely climbing stairs)?
(b) Does the time found in part (a) imply that it is easy to consume more food energy than you can reasonably expect to work off with exercise?

Jordan Gassaway
Jordan Gassaway
Numerade Educator
01:46

Problem 9

(a) A woman climbing the Washington Monument metabolizes $6.00 \times 10^{2} \mathrm{kJ}$ of food energy. If her efficiency is 18.0\%, how much heat transfer occurs to the environment to keep her temperature constant? (b) Discuss the amount of heat transfer found in (a). Is it consistent with the fact that you quickly warm up when exercising?

Jordan Gassaway
Jordan Gassaway
Numerade Educator
03:58

Problem 10

A car tire contains $0.0380 \mathrm{m}^{3}$ of air at a pressure of $2.20 \times 10^{5} \mathrm{N} / \mathrm{m}^{2}$ (about $32 \mathrm{psi}$ ). How much more internal energy does this gas have than the same volume has at zero gauge pressure (which is equivalent to normal atmospheric pressure)?

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
03:09

Problem 11

A helium-filled toy balloon has a gauge pressure of 0.200 atm and a volume of 10.0 L. How much greater is the internal energy of the helium in the balloon than it would be at zero gauge pressure?

cm
Charles Magnusen
Numerade Educator
02:25

Problem 12

Steam to drive an old-fashioned steam locomotive is supplied at a constant gauge pressure of $1.75 \times 10^{6} \mathrm{N} / \mathrm{m}^{2}$ (about 250 psi) to a piston with a 0.200 -m radius. (a) By calculating $P \Delta V$, find the work done by the steam when the piston moves $0.800 \mathrm{m}$. Note that this is the net work output, since gauge pressure is used. (b) Now find the amount of work by calculating the force exerted times the distance traveled. Is the answer the same as in part (a)?

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
03:09

Problem 13

A hand-driven tire pump has a piston with a $2.50-\mathrm{cm}$ diameter and a maximum stroke of $30.0 \mathrm{cm}$. (a) How much work do you do in one stroke if the average gauge pressure is $2.40 \times 10^{5} \mathrm{N} / \mathrm{m}^{2}$ (about $35 \mathrm{psi}$ )? (b) What average force do you exert on the piston, neglecting friction and gravitational force?

cm
Charles Magnusen
Numerade Educator
03:29

Problem 14

Calculate the net work output of a heat engine following path ABCDA in the figure below.

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
03:18

Problem 15

What is the net work output of a heat engine that follows path ABDA in the figure above, with a straight line from B to D? Why is the work output less than for path ABCDA? Explicitly show how you follow the steps in the ProblemSolving Strategies for Thermodynamics.

cm
Charles Magnusen
Numerade Educator
01:29

Problem 16

What is wrong with the claim that a cyclical heat engine does $4.00 \mathrm{kJ}$ of work on an input of $24.0 \mathrm{kJ}$ of heat transfer while 16.0 kJ of heat transfers to the environment?

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
02:53

Problem 17

(a) A cyclical heat engine, operating between temperatures of $450^{\circ} \mathrm{C}$ and $150^{\circ} \mathrm{C}$ produces $4.00 \mathrm{MJ}$ of work on a heat transfer of $5.00 \mathrm{MJ}$ into the engine. How much heat transfer occurs to the environment? (b) What is unreasonable about the engine? (c) Which premise is unreasonable?

cm
Charles Magnusen
Numerade Educator
01:38

Problem 18

Consider a car's gasoline engine. Construct a problem in which you calculate the maximum efficiency this engine can have. Among the things to consider are the effective hot and cold reservoir temperatures. Compare your calculated efficiency with the actual efficiency of car engines.

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
01:38

Problem 19

Consider a car trip into the mountains. Construct a problem in which you calculate the overall efficiency of the car for the trip as a ratio of kinetic and potential energy gained to fuel consumed. Compare this efficiency to the thermodynamic efficiency quoted for gasoline engines and discuss why the thermodynamic efficiency is so much greater. Among the factors to be considered are the gain in altitude and speed, the mass of the car, the distance traveled, and typical fuel economy.

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
02:22

Problem 20

A certain heat engine does $10.0 \mathrm{kJ}$ of work and $8.50 \mathrm{kJ}$ of heat transfer occurs to the environment in a cyclical process.
(a) What was the heat transfer into this engine? (b) What was the engine's efficiency?

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
01:35

Problem 21

With $2.56 \times 10^{6} \mathrm{J}$ of heat transfer into this engine, a given cyclical heat engine can do only $1.50 \times 10^{5} \mathrm{J}$ of work.
(a) What is the engine's efficiency? (b) How much heat transfer to the environment takes place?

cm
Charles Magnusen
Numerade Educator
01:47

Problem 22

(a) What is the work output of a cyclical heat engine having a $22.0 \%$ efficiency and $6.00 \times 10^{9} \mathrm{J}$ of heat transfer into the engine? (b) How much heat transfer occurs to the environment?

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
01:35

Problem 23

(a) What is the efficiency of a cyclical heat engine in which $75.0 \mathrm{kJ}$ of heat transfer occurs to the environment for every $95.0 \mathrm{kJ}$ of heat transfer into the engine? (b) How much work does it produce for $100 \mathrm{kJ}$ of heat transfer into the engine?

cm
Charles Magnusen
Numerade Educator
02:47

Problem 24

The engine of a large ship does $2.00 \times 10^{8} \mathrm{J}$ of work with an efficiency of $5.00 \%$. (a) How much heat transfer occurs to the environment? (b) How many barrels of fuel are consumed, if each barrel produces $6.00 \times 10^{9} \mathrm{J}$ of heat transfer when burned?

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
02:14

Problem 25

(a) How much heat transfer occurs to the environment by an electrical power station that uses $1.25 \times 10^{14} \mathrm{J}$ of heat transfer into the engine with an efficiency of $42.0 \% ?$ (b) What is the ratio of heat transfer to the environment to work output? (c) How much work is done?

cm
Charles Magnusen
Numerade Educator
03:32

Problem 26

Assume that the turbines at a coal-powered power plant were upgraded, resulting in an improvement in efficiency of 3.32\%. Assume that prior to the upgrade the power station had an efficiency of $36 \%$ and that the heat transfer into the engine in one day is still the same at $2.50 \times 10^{14} \mathrm{J}$. (a) How much more electrical energy is produced due to the upgrade?
(b) How much less heat transfer occurs to the environment due to the upgrade?

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
03:23

Problem 27

This problem compares the energy output and heat transfer to the environment by two different types of nuclear power stations-one with the normal efficiency of $34.0 \%,$ and another with an improved efficiency of $40.0 \%$. Suppose both have the same heat transfer into the engine in one day, $2.50 \times 10^{14} \mathrm{J} .$ (a) How much more electrical energy is produced by the more efficient power station? (b) How much less heat transfer occurs to the environment by the more efficient power station? (One type of more efficient nuclear power station, the gas-cooled reactor, has not been reliable enough to be economically feasible in spite of its greater efficiency.)

cm
Charles Magnusen
Numerade Educator
01:23

Problem 28

A certain gasoline engine has an efficiency of $30.0 \%$ What would the hot reservoir temperature be for a Camot engine having that efficiency, if it operates with a cold reservoir temperature of $200^{\circ} \mathrm{C}$ ?

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
01:22

Problem 29

A gas-cooled nuclear reactor operates between hot and cold reservoir temperatures of $700^{\circ} \mathrm{C}$ and $27.0^{\circ} \mathrm{C}$. (a) What is the maximum efficiency of a heat engine operating between these temperatures? (b) Find the ratio of this efficiency to the Carnot efficiency of a standard nuclear reactor (found in Example 15.4 ).

cm
Charles Magnusen
Numerade Educator
03:06

Problem 30

(a) What is the hot reservoir temperature of a Camot engine that has an efficiency of $42.0 \%$ and a cold reservoir temperature of $27.0^{\circ} \mathrm{C}$ ? (b) What must the hot reservoir temperature be for a real heat engine that achieves 0.700 of the maximum efficiency, but still has an efficiency of $42.0 \%$ (and a cold reservoir at $27.0^{\circ} \mathrm{C}$ )? (c) Does your answer imply practical limits to the efficiency of car gasoline engines?

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
01:34

Problem 31

Steam locomotives have an efficiency of $17.0 \%$ and operate with a hot steam temperature of $425^{\circ} \mathrm{C}$. (a) What would the cold reservoir temperature be if this were a Carnot engine? (b) What would the maximum efficiency of this steam engine be if its cold reservoir temperature were $150^{\circ} \mathrm{C}$ ?

cm
Charles Magnusen
Numerade Educator
03:33

Problem 32

Practical steam engines utilize $450^{\circ} \mathrm{C}$ steam, which is later exhausted at $270^{\circ} \mathrm{C}$. (a) What is the maximum efficiency that such a heat engine can have? (b) since $270^{\circ} \mathrm{C}$ steam is still quite hot, a second steam engine is sometimes operated using the exhaust of the first. What is the maximum efficiency of the second engine if its exhaust has a temperature of $150^{\circ} \mathrm{C}$ ? (c) What is the overall efficiency of the two engines? (d) Show that this is the same efficiency as a single Carnot engine operating between $450^{\circ} \mathrm{C}$ and $150^{\circ} \mathrm{C}$. Explicitly show how you follow the steps in the

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
02:07

Problem 33

A coal-fired electrical power station has an efficiency of 38\%. The temperature of the steam leaving the boiler is $550^{\circ} \mathrm{C} .$ What percentage of the maximum efficiency does this station obtain? (Assume the temperature of the environment is $\left.20^{\circ} \mathrm{C} .\right)$

cm
Charles Magnusen
Numerade Educator
02:01

Problem 34

Would you be willing to financially back an inventor who is marketing a device that she claims has $25 \mathrm{kJ}$ of heat transfer at $600 \mathrm{K}$, has heat transfer to the environment at $300 \mathrm{K}$, and does $12 \mathrm{kJ}$ of work? Explain your answer.

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
02:39

Problem 35

(a) Suppose you want to design a steam engine that has heat transfer to the environment at $270^{\circ} \mathrm{C}$ and has a Carnot efficiency of $0.800 .$ What temperature of hot steam must you use? (b) What is unreasonable about the temperature? (c) Which premise is unreasonable?

cm
Charles Magnusen
Numerade Educator
01:36

Problem 36

Calculate the cold reservoir temperature of a steam engine that uses hot steam at $450^{\circ} \mathrm{C}$ and has a Carnot efficiency of 0.700. (b) What is unreasonable about the temperature? (c) Which premise is unreasonable?

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
03:09

Problem 37

What is the coefficient of performance of an ideal heat pump that has heat transfer from a cold temperature of $-25.0^{\circ} \mathrm{C}$ to a hot temperature of $40.0^{\circ} \mathrm{C} ?$

cm
Charles Magnusen
Numerade Educator
01:41

Problem 38

Suppose you have an ideal refrigerator that cools an environment at $-20.0^{\circ} \mathrm{C}$ and has heat transfer to another environment at $50.0^{\circ} \mathrm{C}$. What is its coefficient of performance?

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
02:06

Problem 39

What is the best coefficient of performance possible for a hypothetical refrigerator that could make liquid nitrogen at $-200^{\circ} \mathrm{C}$ and has heat transfer to the environment at $35.0^{\circ} \mathrm{C} ?$

cm
Charles Magnusen
Numerade Educator
01:00

Problem 40

In a very mild winter climate, a heat pump has heat transfer from an environment at $5.00^{\circ} \mathrm{C}$ to one at $35.0^{\circ} \mathrm{C}$. What is the best possible coefficient of performance for these temperatures? Explicitly show how you follow the steps in the Problem-Solving Strategies for Thermodynamics.

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
04:54

Problem 41

(a) What is the best coefficient of performance for a heat pump that has a hot reservoir temperature of $50.0^{\circ} \mathrm{C}$ and a cold reservoir temperature of $-20.0^{\circ} \mathrm{C} ?$ (b) How much heat transfer occurs into the warm environment if $3.60 \times 10^{7} \mathrm{J}$ of work ( $10.0 \mathrm{kW} \cdot \mathrm{h}$ ) is put into it? (c) If the cost of this work input is 10.0 cents $/ \mathrm{kW} \cdot \mathrm{h}$, how does its cost compare with the direct heat transfer achieved by burning natural gas at a cost of 85.0 cents per therm. (A therm is a common unit of energy for natural gas and equals $1.055 \times 10^{8} \mathrm{J}$.)

cm
Charles Magnusen
Numerade Educator
04:54

Problem 42

(a) What is the best coefficient of performance for a refrigerator that cools an environment at $-30.0^{\circ} \mathrm{C}$ and has heat transfer to another environment at $45.0^{\circ} \mathrm{C}$ ? (b) How much work in joules must be done for a heat transfer of 4186 kJ from the cold environment? (c) What is the cost of doing this if the work costs 10.0 cents per $3.60 \times 10^{6} \mathrm{J}$ (a kilowatthour)? (d) How many kJ of heat transfer occurs into the warm environment? (e) Discuss what type of refrigerator might operate between these temperatures.

cm
Charles Magnusen
Numerade Educator
02:51

Problem 43

Suppose you want to operate an ideal refrigerator with a cold temperature of $-10.0^{\circ} \mathrm{C},$ and you would like it to have a coefficient of performance of $7.00 .$ What is the hot reservoir temperature for such a refrigerator?

Rashmi Sinha
Rashmi Sinha
Numerade Educator
01:11

Problem 44

An ideal heat pump is being considered for use in heating an environment with a temperature of $22.0^{\circ} \mathrm{C}$. What is the cold reservoir temperature if the pump is to have a coefficient of performance of $12.0 ?$

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
03:43

Problem 45

A 4-ton air conditioner removes $5.06 \times 10^{7} \mathrm{J}(48,000$ British thermal units) from a cold environment in 1.00 h. (a) What energy input in joules is necessary to do this if the air conditioner has an energy efficiency rating ( $E E R$ ) of $12.0 ?$
(b) What is the cost of doing this if the work costs 10.0 cents per $3.60 \times 10^{6} \mathrm{J}$ (one kilowatt-hour)? (c) Discuss whether this cost seems realistic. Note that the energy efficiency rating
$(E E R)$ of an air conditioner or refrigerator is defined to be the number of British thermal units of heat transfer from a cold environment per hour divided by the watts of power input.

cm
Charles Magnusen
Numerade Educator
01:28

Problem 46

Show that the coefficients of performance of refrigerators and heat pumps are related by $\mathrm{COP}_{\mathrm{ref}}=\mathrm{COP}_{\mathrm{hp}}-1$
Start with the definitions of the $C O P$ s and the conservation of energy relationship between $Q_{\mathrm{h}}, Q_{\mathrm{c}},$ and $W$

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
02:54

Problem 47

(a) On a winter day, a certain house loses $5.00 \times 10^{8} \mathrm{J}$ of heat to the outside (about 500,000 Btu). What is the total change in entropy due to this heat transfer alone, assuming an average indoor temperature of $21.0^{\circ} \mathrm{C}$ and an average outdoor temperature of $5.00^{\circ} \mathrm{C}$ ? (b) This large change in entropy implies a large amount of energy has become unavailable to do work. Where do we find more energy when such energy is lost to us?

cm
Charles Magnusen
Numerade Educator
01:13

Problem 48

On a hot summer day, $4.00 \times 10^{6} \mathrm{J}$ of heat transfer into a parked car takes place, increasing its temperature from $35.0^{\circ} \mathrm{C}$ to $45.0^{\circ} \mathrm{C} .$ What is the increase in entropy of the car due to this heat transfer alone?

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
01:53

Problem 49

A hot rock ejected from a volcano's lava fountain cools from $1100^{\circ} \mathrm{C}$ to $40.0^{\circ} \mathrm{C},$ and its entropy decreases by 950 J/K. How much heat transfer occurs from the rock?

cm
Charles Magnusen
Numerade Educator
01:54

Problem 50

When $1.60 \times 10^{5} \mathrm{J}$ of heat transfer occurs into a meat pie initially at $20.0^{\circ} \mathrm{C}$, its entropy increases by $480 \mathrm{J} / \mathrm{K}$. What is its final temperature?

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
02:46

Problem 51

The Sun radiates energy at the rate of $3.80 \times 10^{26} \mathrm{W}$ from its $5500^{\circ} \mathrm{C}$ surface into dark empty space (a negligible fraction radiates onto Earth and the other planets). The effective temperature of deep space is $-270^{\circ} \mathrm{C}$. (a) What is the increase in entropy in one day due to this heat transfer? (b) How much work is made unavailable?

cm
Charles Magnusen
Numerade Educator
04:36

Problem 52

(a) In reaching equilibrium, how much heat transfer occurs from $1.00 \mathrm{kg}$ of water at $40.0^{\circ} \mathrm{C}$ when it is placed in contact with $1.00 \mathrm{kg}$ of $20.0^{\circ} \mathrm{C}$ water in reaching equilibrium? (b) What is the change in entropy due to this heat transfer? (c) How much work is made unavailable, taking the lowest temperature to be $20.0^{\circ} \mathrm{C}$ ? Explicitly show how you follow the steps in the Problem-Solving Strategies for Entropy.

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
01:32

Problem 53

What is the decrease in entropy of $25.0 \mathrm{g}$ of water that condenses on a bathroom mirror at a temperature of $35.0^{\circ} \mathrm{C},$ assuming no change in temperature and given the latent heat of vaporization to be $2450 \mathrm{kJ} / \mathrm{kg} ?$

cm
Charles Magnusen
Numerade Educator
03:56

Problem 54

Find the increase in entropy of $1.00 \mathrm{kg}$ of liquid nitrogen that starts at its boiling temperature, boils, and warms to $20.0^{\circ} \mathrm{C}$ at constant pressure.

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
02:22

Problem 55

A large electrical power station generates 1000 MW of electricity with an efficiency of $35.0 \%$. (a) Calculate the heat transfer to the power station, $Q_{\mathrm{h}}$, in one day. (b) How much heat transfer $Q_{\mathrm{c}}$ occurs to the environment in one day? $(\mathrm{c})$ if the heat transfer in the cooling towers is from $35.0^{\circ} \mathrm{C}$ water into the local air mass, which increases in temperature from $18.0^{\circ} \mathrm{C}$ to $20.0^{\circ} \mathrm{C},$ what is the total increase in entropy due to this heat transfer? (d) How much energy becomes unavailable to do work because of this increase in entropy, assuming an $18.0^{\circ} \mathrm{C}$ lowest temperature? (Part of $Q_{\mathrm{c}}$ could be utilized to operate heat engines or for simply heating the surroundings, but it rarely is.)

Salamat Ali
Salamat Ali
Numerade Educator
04:36

Problem 56

(a) How much heat transfer occurs from $20.0 \mathrm{kg}$ of $90.0^{\circ} \mathrm{C}$ water placed in contact with $20.0 \mathrm{kg}$ of $10.0^{\circ} \mathrm{C}$ water, producing a final temperature of $50.0^{\circ} \mathrm{C}$ ? (b) How much work could a Camot engine do with this heat transfer, assuming it operates between two reservoirs at constant temperatures of $90.0^{\circ} \mathrm{C}$ and $10.0^{\circ} \mathrm{C}$ ? (c) What increase in entropy is produced by mixing $20.0 \mathrm{kg}$ of $90.0^{\circ} \mathrm{C}$ water with $20.0 \mathrm{kg}$ of $10.0^{\circ} \mathrm{C}$ water? (d) Calculate the amount of work made unavailable by this mixing using a low temperature of $10.0^{\circ} \mathrm{C},$ and compare it with the work done by the Carnot engine. Explicitly show how you follow the steps in the Problem-Solving Strategies for Entropy. (e) Discuss how everyday processes make increasingly more energy unavailable to do work, as implied by this problem.

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
02:33

Problem 57

Using Table $15.4,$ verify the contention that if you toss 100 coins each second, you can expect to get 100 heads or 100 tails once in $2 \times 10^{22}$ years; calculate the time to twodigit accuracy.

cm
Charles Magnusen
Numerade Educator
01:09

Problem 58

What percent of the time will you get something in the range from 60 heads and 40 tails through 40 heads and 60 tails when tossing 100 coins? The total number of microstates in that range is $1.22 \times 10^{30}$. (Consult Table $15.4 .$ )

Anthony Pisaturo
Anthony Pisaturo
Numerade Educator
03:20

Problem 59

(a) If tossing 100 coins, how many ways (microstates) are there to get the three most likely macrostates of 49 heads and 51 tails, 50 heads and 50 tails, and 51 heads and 49 tails? (b) What percent of the total possibilities is this? (Consult Table 15.4.)

cm
Charles Magnusen
Numerade Educator
05:40

Problem 60

(a) What is the change in entropy if you start with 100 coins in the 45 heads and 55 tails macrostate, toss them, and get 51 heads and 49 tails? (b) What if you get 75 heads and 25 tails? (c) How much more likely is 51 heads and 49 tails than 75 heads and 25 tails? (d) Does either outcome violate the law of thermodynamics?

Susan Hallstrom
Susan Hallstrom
Numerade Educator
05:40

Problem 61

(a) What is the change in entropy if you start with 10 coins in the 5 heads and 5 tails macrostate, toss them, and get 2 heads and 8 tails? (b) How much more likely is 5 heads and 5 tails than 2 heads and 8 tails? (Take the ratio of the number of microstates to find out.) (c) If you were betting on 2 heads and 8 tails would you accept odds of 252 to $45 ?$ Explain why or why not.

Susan Hallstrom
Susan Hallstrom
Numerade Educator
02:45

Problem 62

(a) If you toss 10 coins, what percent of the time will you get the three most likely macrostates (6 heads and 4 tails, 5 heads and 5 tails, 4 heads and 6 tails)? (b) You can realistically toss 10 coins and count the number of heads and tails about twice a minute. At that rate, how long will it take on average to get either 10 heads and 0 tails or 0 heads and 10 tails?

Clarissa Noh
Clarissa Noh
Numerade Educator
08:37

Problem 63

(a) Construct a table showing the macrostates and all of the individual microstates for tossing 6 coins. (Use Table 15.5 as a guide.) (b) How many macrostates are there? (c) What is the total number of microstates? (d) What percent chance is there of tossing 5 heads and 1 tail? (e) How much more likely are you to toss 3 heads and 3 tails than 5 heads and 1 tail? (Take the ratio of the number of microstates to find out.)

Mehdi Hatefipour
Mehdi Hatefipour
Numerade Educator
03:43

Problem 64

In an air conditioner, 12.65 MJ of heat transfer occurs from a cold environment in 1.00 h. (a) What mass of ice melting would involve the same heat transfer? (b) How many hours of operation would be equivalent to melting $900 \mathrm{kg}$ of ice? (c) If ice costs 20 cents per $\mathrm{kg}$, do you think the air conditioner could be operated more cheaply than by simply using ice? Describe in detail how you evaluate the relative costs.

cm
Charles Magnusen
Numerade Educator