00:01
Okay, so we're doing chapter 26, problem 25 here.
00:04
So we said, consider the network of resistors shown in this circuit shown over here.
00:10
So for part a, we want to figure out what happens to the voltage across each resistor when the switch s is closed.
00:18
So we're going from s open to closing it, so s then becomes closed.
00:27
Okay.
00:28
So one thing to note here is that when we add resistors, if we're adding resistors in series, then the resistance is going to go up.
00:43
When we add resistors in parallel, the total overall resistance of our circuit is going to go down.
00:51
So that means that more current is going to be delivered by the battery.
01:05
And since r1 is in series with the battery, its voltage will increase.
01:13
Because of that increase, the voltage across r3 and r4 must decrease because there are two resistors in parallel, but we're adding in another resistor in parallel, so the total voltage is going to drop, which means the total resistance of that is going to drop, which means the voltage across it's going to drop.
01:38
And since there was originally no voltage in r2 until the switch is closed because there's no current going through there.
01:46
So it goes from zero voltage to having a positive voltage across it.
01:50
So that's going to increase.
01:52
So to summarize what i said here, so since r1 is in series and the current is increasing, we know that the voltage of one is going to increase.
01:59
Since r2 initially has no current going through it, we know the voltage through r2 is going to increase when we close.
02:06
And since r3 and r4 are both in parallel to the added resistor, that means the total equivalent resistor of this right side of the circuit is going to decrease, and with the same current, that means the voltage drop across each particular resistor, r3 and r4, is going to both decrease.
02:33
Okay, so moving on to part b, we want to figure out what happens to the current through each when the switch is closed.
02:41
Well, this is pretty simple because of oams law, we know that v equals ir for each resistor.
02:49
So since the resistance is constant through each of these, the current is going to change exactly how the voltage changes.
02:58
So that means we know the current through 1 increases.
03:01
The current through resistor 2 also increases.
03:04
And then the current through 3 and 4, were all decreased just as the voltage did.
03:12
Okay.
03:14
So moving on to part c now, it says, what happens to the power output of the battery when the switch is closed? well, the voltage is fixed.
03:25
So the v from the battery is fixed because this just comes from the emf and the internal resistance of the battery.
03:35
But we already said as part a that the current from the battery is going to increase so the power delivered by the battery, which is just given as p equals i squared r, this is going to increase because the overall resistance is going to be the same, and then the current is increasing.
04:04
So we know that the power increases.
04:08
Another way to write this equation to better see it is p equals i times v.
04:16
And we already figured out that voltage is constant.
04:19
So this is a constant.
04:21
And i increases.
04:24
So that means p increases.
04:29
Okay, so that got rid of all the conceptual questions with this problem.
04:34
But now let's move on to some of the numerical questions here.
04:41
Or i guess there's just one more part.
04:43
It's part d.
04:43
This is the numerical part.
04:44
So we know that it says let r1 equal r2, r3, equal r4.
04:50
And they all equal 125 own resistors.
04:54
And it says the v from the battery is 222 .0 volts.
05:00
So now we want to determine the current through each resistor before and after closing switch.
05:09
And we want to see if our qualitative predictions we did through a through c is going to be confirmed.
05:18
Okay, so let's start by finding what the equivalent resistance is.
05:23
In the circuit.
05:28
And this is in the first case.
05:30
We're going to do the open case.
05:32
So r eq open.
05:33
So in this case, we have r1 in series with r3 and r4 in parallel.
05:39
So this comes out to be 1 over r3, 1 over r4, and then this is all inverse...