• Home
  • Textbooks
  • College Physics for AP® Courses
  • Circuits, Bioelectricity, and DC Instruments

College Physics for AP® Courses

Irina Lyublinskaya, Gregg Wolfe, Douglas Ingram , Liza Pujji

Chapter 21

Circuits, Bioelectricity, and DC Instruments - all with Video Answers

Educators

cm
+ 2 more educators

Chapter Questions

01:20

Problem 1

(a) What is the resistance of ten $275-\Omega$ resistors connected in series? (b) In parallel?

cm
Charles Magnusen
Numerade Educator
01:05

Problem 2

(a) What is the resistance of a $1.00 \times 10^{2}-\Omega,$ a $2.50-\mathrm{k} \Omega$ and a $4.00-\mathrm{k} \Omega$ resistor connected in series? (b) In parallel?

Ze-Han Lee
Ze-Han Lee
Numerade Educator
01:53

Problem 3

What are the largest and smallest resistances you can obtain by connecting a $36.0-\Omega,$ a $50.0-\Omega,$ and a $700-\Omega$ resistor together?

cm
Charles Magnusen
Numerade Educator
01:41

Problem 4

An 1800-W toaster, a 1400-W electric frying pan, and a 75-W lamp are plugged into the same outlet in a 15-A, 120-V circuit. (The three devices are in parallel when plugged into the same socket.). (a) What current is drawn by each device? (b) Will this combination blow the 15-A fuse?

Ze-Han Lee
Ze-Han Lee
Numerade Educator
06:07

Problem 5

Your car’s 30.0-W headlight and 2.40-kW starter are ordinarily connected in parallel in a 12.0-V system. What power would one headlight and the starter consume if connected in series to a 12.0-V battery? (Neglect any other resistance in the circuit and any change in resistance in the two devices.)

cm
Charles Magnusen
Numerade Educator
02:16

Problem 6

(a) Given a 48. 0 -V battery and $24.0-\Omega$ and $96.0-\Omega$ resistors, find the current and power for each when connected in series. (b) Repeat when the resistances are in parallel.

Ze-Han Lee
Ze-Han Lee
Numerade Educator
02:47

Problem 7

Referring to the example combining series and parallel circuits and Figure 21.6 , calculate $I_{3}$ in the following two different ways: (a) from the known values of $I$ and $I_{2} ;$ (b) using Ohm's law for $R_{3} .$ In both parts explicitly show how you follow the steps in the Problem-Solving Strategies for Series and Parallel Resistors.

cm
Charles Magnusen
Numerade Educator
04:48

Problem 8

Referring to Figure $21.6 :$ (a) Calculate $P_{3}$ and note how it compares with $P_{3}$ found in the first two example problems in this module. (b) Find the total power supplied by the source and compare it with the sum of the powers dissipated by the resistors.

Ze-Han Lee
Ze-Han Lee
Numerade Educator
06:36

Problem 9

Refer to Figure 21.7 and the discussion of lights dimming when a heavy appliance comes on. (a) Given the voltage source is $120 \mathrm{V},$ the wire resistance is 0.400$\Omega$ , and the bulb is nominally 75.0 W, what power will the bulb dissipate if a total of 15.0 A passes through the wires when the motor comes on? Assume negligible change in bulb resistance. (b) What power is consumed by the motor?

Benjamin Arndell
Benjamin Arndell
Numerade Educator
05:10

Problem 10

A $240-$ kV power transmission line carrying $5.00 \times 10^{2}$ A is hung from grounded metal towers by ceramic insulators, each having a $1.00 \times 10^{9}-\Omega$ resistance. Figure 21.54 . (a) What is the resistance to ground of 100 of these insulators? (b) Calculate the power dissipated by 100 of them. (c) What fraction of the power carried by the line is this? Explicitly show how you follow the steps in the Problem-Solving Strategies for Series and Parallel Resistors.

Vishal Gupta
Vishal Gupta
Numerade Educator
02:35

Problem 11

Show that if two resistors $R_{1}$ and $R_{2}$ are combined and one is much greater than the other $\left(R_{1}>>R_{2}\right) :$ (a) Their series resistance is very nearly equal to the greater resistance $R_{1}$ (b) Their parallel resistance is very nearly equal to smaller resistance $R_{2}$ .

cm
Charles Magnusen
Numerade Educator
01:42

Problem 12

Unreasonable Results
Two resistors, one having a resistance of $145 \Omega,$ are connected in parallel to produce a total resistance of 150$\Omega$ (a) What is the value of the second resistance? (b) What is unreasonable about this result? (c) Which assumptions are unreasonable or inconsistent?

Ze-Han Lee
Ze-Han Lee
Numerade Educator
02:04

Problem 13

Unreasonable Results
Two resistors, one having a resistance of 900 $\mathrm{k} \Omega$ , are connected in series to produce a total resistance of 0.500 $\mathrm{M\Omega}$ . (a) What is the value of the second resistance? (b) What is unreasonable about this result? (c) Which assumptions are unreasonable or inconsistent?

cm
Charles Magnusen
Numerade Educator
00:24

Problem 14

Standard automobile batteries have six lead-acid cells in series, creating a total emf of 12.0 V. What is the emf of an individual lead-acid cell?

Ze-Han Lee
Ze-Han Lee
Numerade Educator
01:18

Problem 15

Carbon-zinc dry cells (sometimes referred to as nonalkaline cells) have an emf of 1.54 V, and they are produced as single cells or in various combinations to form other voltages. (a) How many 1.54-V cells are needed to make the common 9-V battery used in many small electronic devices? (b) What is the actual emf of the approximately 9-V battery? (c) Discuss how internal resistance in the series connection of cells will affect the terminal voltage of this approximately 9-V battery.

Sophie S
Sophie S
Numerade Educator
01:01

Problem 16

16. What is the output voltage of a $3.0000-V$ lithium cell in a digital wristwatch that draws $0.300 \mathrm{mA},$ if the cell's internal resistance is 2.00$\Omega$ ?

Ze-Han Lee
Ze-Han Lee
Numerade Educator
01:37

Problem 17

(a) What is the terminal voltage of a large $1.54-V$ carbon- zinc dry cell used in a physics lab to supply 2.00 A to a circuit, if the cell's internal resistance is 0.100$\Omega ?$ (b) How much electrical power does the cell produce? (c) What power goes to its load?

cm
Charles Magnusen
Numerade Educator
01:01

Problem 18

What is the internal resistance of an automobile battery that has an emf of 12.0 V and a terminal voltage of 15.0 V while a current of 8.00 A is charging it?

Ze-Han Lee
Ze-Han Lee
Numerade Educator
01:31

Problem 19

(a) Find the terminal voltage of a 12.0-V motorcycle battery having a $0.600-\Omega$ internal resistance, if it is being charged by a current of 10.0 A. (b) What is the output voltage of the battery charger?

cm
Charles Magnusen
Numerade Educator
03:38

Problem 20

A car battery with a $12-\mathrm{V}$ emf and an internal resistance of 0.050$\Omega$ is being charged with a current of 60 $\mathrm{A}$ . Note that in this process the battery is being charged. (a) What is the potential difference across its terminals? (b) At what rate is thermal energy being dissipated in the battery? (c) At what rate is electric energy being converted to chemical energy? (d) What are the answers to (a) and (b) when the battery is used to supply 60 A to the starter motor?

Ze-Han Lee
Ze-Han Lee
Numerade Educator
04:03

Problem 21

The hot resistance of a flashlight bulb is $2.30 \Omega,$ and it is run by a $1.58-$ V alkaline cell having a $0.100-\Omega$ internal resistance. (a) What current flows? (b) Calculate the power supplied to the bulb using $I^{2} R_{\text { bulb }} \cdot($ c) Is this power the same as calculated using $\frac{V^{2}}{R_{\text { bulb }}} ?$

cm
Charles Magnusen
Numerade Educator
03:12

Problem 22

The label on a portable radio recommends the use of rechargeable nickel-cadmium cells (nicads), although they have a 1.25-V emf while alkaline cells have a 1.58-V emf. The radio has a $3.20-\Omega$ resistance. (a) Draw a circuit diagram of the radio and its batteries. Now, calculate the power delivered
to the radio. (b) When using Nicad cells each having an internal resistance of 0.0400$\Omega$ . (c) When using alkaline cells each having an internal resistance of 0.200$\Omega .$ (d) Does this difference seem significant, considering that the radio’s effective resistance is lowered when its volume is turned up?

Ze-Han Lee
Ze-Han Lee
Numerade Educator
06:20

Problem 23

An automobile starter motor has an equivalent resistance of 0.0500$\Omega$ and is supplied by a $12.0-$ battery with a $0.0100-\Omega$ internal resistance. (a) What is the current to the motor? (b) What voltage is applied to it? (c) What power is supplied to the motor? (d) Repeat these calculations for when the battery connections are corroded and add 0.0900$\Omega$ to the circuit. (Significant problems are caused by even small amounts of unwanted resistance in low-voltage, high-current applications.)

Vishal Gupta
Vishal Gupta
Numerade Educator
02:47

Problem 24

A child's electronic toy is supplied by three 1.58 - V alkaline cells having internal resistances of 0.0200$\Omega$ in series with a 1.53 -V carbon-zinc dry cell having a $0.100-\Omega$ internal resistance. The load resistance is 10.0$\Omega$ . (a) Draw a circuit diagram of the toy and its batteries. (b) What current flows? (c) How much power is supplied to the load? (d) What is the internal resistance of the dry cell if it goes bad, resulting in only 0.500 W being supplied to the load?

Ze-Han Lee
Ze-Han Lee
Numerade Educator
04:12

Problem 25

(a) What is the internal resistance of a voltage source if its terminal voltage drops by 2.00 V when the current supplied increases by 5.00 A? (b) Can the emf of the voltage source be found with the information supplied?

Sophie S
Sophie S
Numerade Educator
04:19

Problem 26

A person with body resistance between his hands of 10.0 $\mathrm{k} \Omega$ accidentally grasps the terminals of a $20.0-\mathrm{kV}$ power supply. (Do NOT do this!) (a) Draw a circuit diagram to represent the situation. (b) If the internal resistance of the power supply is $2000 \Omega,$ what is the current through his body? (c) What is the power dissipated in his body? (d) If the power supply is to be made safe by increasing its internal resistance, what should the internal resistance be for the maximum current in this situation to be 1.00 mA or less? (e) Will this modification compromise the effectiveness of the power supply for driving low-resistance devices? Explain your reasoning.

Ze-Han Lee
Ze-Han Lee
Numerade Educator
01:34

Problem 27

Electric fish generate current with biological cells called electroplaques, which are physiological emf devices. The electroplaques in the South American eel are arranged in 140 rows, each row stretching horizontally along the body and each containing 5000 electroplaques. Each electroplaque has an emf of 0.15 $\mathrm{V}$ and internal resistance of 0.25$\Omega .$ If the water surrounding the fish has resistance of $800 \Omega,$ how much current can the eel produce in water from near its head to near its tail?

Prashant Bana
Prashant Bana
Numerade Educator
02:49

Problem 28

Integrated Concepts
A 12.0-V emf automobile battery has a terminal voltage of 16.0 V when being charged by a current of 10.0 A. (a) What is the battery’s internal resistance? (b) What power is dissipated inside the battery? (c) At what rate (in ºC/min ) will its temperature increase if its mass is 20.0 kg and it has a specific heat of 0.300 kcal/kg ? ºC , assuming no heat escapes?

Ze-Han Lee
Ze-Han Lee
Numerade Educator
01:52

Problem 29

Unreasonable Results
A 1.58 -V alkaline cell with a $0.200-\Omega$ internal resistance is supplying 8.50 A to a load. (a) What is its terminal voltage? (b) What is the value of the load resistance? (c) What is unreasonable about these results? (d) Which assumptions are unreasonable or inconsistent?

cm
Charles Magnusen
Numerade Educator
01:46

Problem 30

Unreasonable Results
(a) What is the internal resistance of a 1.54-V dry cell that supplies 1.00 W of power to a $15.0-\Omega$ bulb? (b) What is unreasonable about this result? (c) Which assumptions are unreasonable or inconsistent?

Ze-Han Lee
Ze-Han Lee
Numerade Educator
02:06

Problem 31

Apply the loop rule to loop abcdefgha in Figure 21.27.

cm
Charles Magnusen
Numerade Educator
01:48

Problem 32

Apply the loop rule to loop aedcba in Figure 21.27.

Ze-Han Lee
Ze-Han Lee
Numerade Educator
02:01

Problem 33

Verify the second equation in Example 21.5 by substituting the values found for the currents $I_{1}$ and $I_{2}$

cm
Charles Magnusen
Numerade Educator
00:57

Problem 34

Verify the third equation in Example 21.5 by substituting the values found for the currents $I_{1}$ and $I_{3}$

Ze-Han Lee
Ze-Han Lee
Numerade Educator
02:05

Problem 35

Apply the junction rule at point a in Figure 21.55.

FS
Fiona Suba
Numerade Educator
03:40

Problem 36

Apply the loop rule to loop abcdefghija in Figure 21.55.

Ze-Han Lee
Ze-Han Lee
Numerade Educator
05:13

Problem 37

Apply the loop rule to loop akledcba in Figure 21.55.

Vishal Gupta
Vishal Gupta
Numerade Educator
11:23

Problem 38

Find the currents flowing in the circuit in Figure 21.55. Explicitly show how you follow the steps in the ProblemSolving Strategies for Series and Parallel Resistors.

Vishal Gupta
Vishal Gupta
Numerade Educator
06:09

Problem 39

Solve Example 21.5, but use loop abcdefgha instead of loop akledcba. Explicitly show how you follow the steps in the Problem-Solving Strategies for Series and Parallel Resistors.

Sophie S
Sophie S
Numerade Educator
10:27

Problem 40

Find the currents flowing in the circuit in Figure 21.50.

Vishal Gupta
Vishal Gupta
Numerade Educator
01:43

Problem 41

Unreasonable Results
Consider the circuit in Figure 21.56, and suppose that the emfs are unknown and the currents are given to be $I_{1}=5.00 \mathrm{A}, I_{2}=3.0 \mathrm{A},$ and $I_{3}=-2.00 \mathrm{A}$ (a) Could
you find the emfs? (b) What is wrong with the assumptions?

cm
Charles Magnusen
Numerade Educator
00:44

Problem 42

What is the sensitivity of the galvanometer (that is, what current gives a full-scale deflection) inside a voltmeter that has a $1.00-M \Omega$ resistance on its 30.0 -V scale?

Ze-Han Lee
Ze-Han Lee
Numerade Educator
01:52

Problem 43

What is the sensitivity of the galvanometer (that is, what current gives a full-scale deflection) inside a voltmeter that has a $25.0-\mathrm{k} \Omega$ resistance on its $100-\mathrm{V}$ scale?

cm
Charles Magnusen
Numerade Educator
01:09

Problem 44

Find the resistance that must be placed in series with a $25.0-\Omega$ galvanometer having a $50.0-\mu \mathrm{A}$ sensitivity (the same as the one discussed in the text) to allow it to be used
as a voltmeter with a 0.100-V full-scale reading.

Ze-Han Lee
Ze-Han Lee
Numerade Educator
01:36

Problem 45

Find the resistance that must be placed in series with a $25.0-\Omega$ galvanometer having a $50.0-\mu \mathrm{A}$ sensitivity (the same as the one discussed in the text) to allow it to be used
as a voltmeter with a 3000-V full-scale reading. Include a circuit diagram with your solution.

cm
Charles Magnusen
Numerade Educator
02:00

Problem 46

Find the resistance that must be placed in parallel with a $25.0-\Omega$ galvanometer having a $50.0-\mu \mathrm{A}$ sensitivity (the same as the one discussed in the text) to allow it to be used as an ammeter with a 10.0-A full-scale reading. Include a circuit diagram with your solution.

Ze-Han Lee
Ze-Han Lee
Numerade Educator
04:08

Problem 47

Find the resistance that must be placed in parallel with a $25.0-\Omega$ galvanometer having a 50.0 -\muA sensitivity (the same as the one discussed in the text) to allow it to be used as an ammeter with a 300-mA full-scale reading.

cm
Charles Magnusen
Numerade Educator
01:21

Problem 48

Find the resistance that must be placed in series with a $10.0-\Omega$ galvanometer having a $100-\mu \mathrm{A}$ sensitivity to allow it to be used as a voltmeter with: (a) a 300-V full-scale reading, and (b) a 0.300-V full-scale reading.

Ze-Han Lee
Ze-Han Lee
Numerade Educator
05:23

Problem 49

Find the resistance that must be placed in parallel with a $10.0-\Omega$ galvanometer having a $100-\mu \mathrm{A}$ sensitivity to allow it to be used as an ammeter with: (a) a 20.0-A full-scale reading, and (b) a 100-mA full-scale reading.

cm
Charles Magnusen
Numerade Educator
01:21

Problem 50

Suppose you measure the terminal voltage of a $1.585-\mathrm{V}$ alkaline cell having an internal resistance of 0.100$\Omega$ by placing a 1.00 -k $\Omega$ voltmeter across its terminals. (See Figure 21.57.) (a) What current flows? (b) Find the terminal voltage. (c) To see how close the measured terminal voltage is to the emf, calculate their ratio.

Ze-Han Lee
Ze-Han Lee
Numerade Educator
03:10

Problem 51

Suppose you measure the terminal voltage of a $3.200-\mathrm{V}$ lithium cell having an internal resistance of 5.00$\Omega$ by placing a 1.00 -k $\Omega$ voltmeter across its terminals. (a) What current flows? (b) Find the terminal voltage. (c) To see how close the measured terminal voltage is to the emf, calculate their ratio.

cm
Charles Magnusen
Numerade Educator
01:10

Problem 52

A certain ammeter has a resistance of $5.00 \times 10^{-5} \Omega$ on its 3.00 -A scale and contains a $10.0-\Omega$ galvanometer. What is the sensitivity of the galvanometer?

Ze-Han Lee
Ze-Han Lee
Numerade Educator
05:49

Problem 53

A 1.00 -M\Omega voltmeter is placed in parallel with a 75.0 -k $\Omega$ resistor in a circuit. (a) Draw a circuit diagram of the connection. (b) What is the resistance of the combination? (c) If the voltage across the combination is kept the same as it was across the $75.0-\mathrm{k} \Omega$ resistor alone, what is the percent increase in current? (d) If the current through the combination is kept the same as it was through the $75.0-\mathrm{k} \Omega$ resistor alone, what is the percentage decrease in voltage? (e) Are the changes found in parts (c) and (d) significant? Discuss.

cm
Charles Magnusen
Numerade Educator
02:50

Problem 54

A $0.020-\Omega$ ammeter is placed in series with a $10.00-\Omega$ resistor in a circuit. (a) Draw a circuit diagram of the connection. (b) Calculate the resistance of the combination. (c) If the voltage is kept the same across the combination as it was through the $10.00-\Omega$ resistor alone, what is the percent decrease in current? (d) If the current is kept the same through the combination as it was through the $10.00-\Omega$ resistor alone, what is the percent increase in voltage? (e) Are the changes found in parts (c) and (d) significant? Discuss.

Ze-Han Lee
Ze-Han Lee
Numerade Educator
02:16

Problem 55

Unreasonable Results
Suppose you have a $40.0-\Omega$ galvanometer with a $25.0-\mu \mathrm{A}$ sensitivity. (a) What resistance would you put in series with it to allow it to be used as a voltmeter that has a full-scale deflection for 0.500 mV? (b) What is unreasonable about this result? (c) Which assumptions are responsible?

cm
Charles Magnusen
Numerade Educator
01:43

Problem 56

Unreasonable Results
(a) What resistance would you put in parallel with a $40.0-\Omega$ galvanometer having a $25.0-\mu \mathrm{A}$ sensitivity to allow it to be used as an ammeter that has a full-scale deflection for $10.0-\mu \mathrm{A}$ ? (b) What is unreasonable about this result? (c) Which assumptions are responsible?

Ze-Han Lee
Ze-Han Lee
Numerade Educator
02:20

Problem 57

What is the emf $_{\mathrm{X}}$ of a cell being measured in a potentiometer, if the standard cell's emf is 12.0 $\mathrm{V}$ and the potentiometer balances for $R_{\mathrm{x}}=5.000 \Omega$ and $R_{\mathrm{s}}=2.500 \Omega$ ?

cm
Charles Magnusen
Numerade Educator
01:07

Problem 58

Calculate the emf $_{x}$ of a dry cell for which a potentiometer is balanced when $R_{x}=1.200 \Omega,$ while an alkaline standard cell with an emf of 1.600 V requires $R_{s}=1.247 \Omega$ to balance the potentiometer.

Sophie S
Sophie S
Numerade Educator
01:33

Problem 59

When an unknown resistance $R_{\mathrm{x}}$ is placed in a Wheatstone bridge, it is possible to balance the bridge by adjusting $R_{3}$ to be 2500$\Omega .$ What is $R_{\mathrm{x}}$ if $\frac{R_{2}}{R_{1}}=0.625$ $?$

cm
Charles Magnusen
Numerade Educator
00:31

Problem 60

To what value must you adjust $R_{3}$ to balance a Wheatstone bridge, if the unknown resistance $R_{\mathrm{x}}$ is $100 \Omega, R_{1}$ is $50.0 \Omega,$ and $R_{2}$ is 175$\Omega$ ?

Ze-Han Lee
Ze-Han Lee
Numerade Educator
02:49

Problem 61

(a) What is the unknown emf $_{x}$ in a potentiometer that balances when $R_{x}$ is 10.0$\Omega$ , and balances when $R_{s}$ is 15.0$\Omega$ for a standard $3.000-\mathrm{V}$ emf? (b) The same emf $_{\mathrm{x}}$ is placed in the same potentiometer, which now balances when $R_{\mathrm{s}}$ is 15.0$\Omega$ for a standard emf of 3.100 $\mathrm{V}$ . At what resistance $R_{\mathrm{X}}$ will the potentiometer balance?

cm
Charles Magnusen
Numerade Educator
00:49

Problem 62

Suppose you want to measure resistances in the range from 10.0$\Omega$ to 10.0 $\mathrm{k} \Omega$ using a Wheatstone bridge that has $\frac{R_{2}}{R_{1}}=2.000 .$ Over what range should $R_{3}$ be adjustable?

Ze-Han Lee
Ze-Han Lee
Numerade Educator
01:18

Problem 63

The timing device in an automobile’s intermittent wiper system is based on an RC time constant and utilizes a $0.500-\mu \mathrm{F}$ capacitor and a variable resistor. Over what range must $R$ be made to vary to achieve time constants from 2.00 to 15.0 s?

cm
Charles Magnusen
Numerade Educator
02:02

Problem 64

A heart pacemaker fires 72 times a minute, each time a 25.0-nF capacitor is charged (by a battery in series with a resistor) to 0.632 of its full voltage. What is the value of the resistance?

Ze-Han Lee
Ze-Han Lee
Numerade Educator
01:59

Problem 65

The duration of a photographic flash is related to an $R C$ time constant, which is 0.100$\mu$ s for a certain camera. (a) If the resistance of the flash lamp is 0.0400$\Omega$ during discharge, what is the size of the capacitor supplying its energy? (b) What is the time constant for charging the capacitor, if the charging resistance is 800 $\mathrm{k} \Omega ?$

cm
Charles Magnusen
Numerade Educator
02:29

Problem 66

A 2.00 - and a $7.50-\mu \mathrm{F}$ capacitor can be connected in series or parallel, as can a 25.0 - and a $100-\mathrm{k} \Omega$ resistor. Calculate the four $R C$ time constants possible from connecting the resulting capacitance and resible from connecting the resulting capacitance and resistance in series.

Ze-Han Lee
Ze-Han Lee
Numerade Educator
01:22

Problem 67

After two time constants, what percentage of the final voltage, emf, is on an initially uncharged capacitor C , charged through a resistance R ?

cm
Charles Magnusen
Numerade Educator
02:41

Problem 68

A $500-\Omega$ resistor, an uncharged $1.50-\mu \mathrm{F}$ capacitor, and a 6.16 -V emf are connected in series. (a) What is the initial current? (b) What is the $R C$ time constant? (c) What is the current after one time constant? (d) What is the voltage on the capacitor after one time constant?

Ze-Han Lee
Ze-Han Lee
Numerade Educator
02:55

Problem 69

A heart defibrillator being used on a patient has an RC time constant of 10.0 ms due to the resistance of the patient and the capacitance of the defibrillator. (a) If the defibrillator has an $8.00-\mu \mathrm{F}$ capacitance, what is the resistance of the path through the patient? (You may neglect the capacitance
of the patient and the resistance of the defibrillator.) (b) If the initial voltage is 12.0 kV, how long does it take to decline to $6.00 \times 10^{2} \mathrm{v} ?$

cm
Charles Magnusen
Numerade Educator
01:20

Problem 70

An ECG monitor must have an RC time constant less than $1.00 \times 10^{2}$ us to be able to measure variations in voltage over small time intervals. (a) If the resistance of the
circuit (due mostly to that of the patient’s chest) is 1.00 $\mathrm{k} \Omega$ what is the maximum capacitance of the circuit? (b) Would it be difficult in practice to limit the capacitance to less than the value found in (a)?

Ze-Han Lee
Ze-Han Lee
Numerade Educator
05:10

Problem 71

Figure 21.58 shows how a bleeder resistor is used to discharge a capacitor after an electronic device is shut off, allowing a person to work on the electronics with less risk of shock. (a) What is the time constant? (b) How long will it take to reduce the voltage on the capacitor to 0.250% (5% of 5%) of its full value once discharge begins? (c) If the capacitor is charged to a voltage $V_{0}$ through a $100-\Omega$ resistance, calculate the time it takes to rise to 0.865$V_{0}$ (This is about two time constants.

cm
Charles Magnusen
Numerade Educator
01:18

Problem 72

Using the exact exponential treatment, find how much time is required to discharge a $250-\mu \mathrm{F}$ capacitor through a $500-\Omega$ resistor down to 1.00$\%$ of its original voltage.

Ze-Han Lee
Ze-Han Lee
Numerade Educator
02:56

Problem 73

Using the exact exponential treatment, find how much time is required to charge an initially uncharged 100 -pF capacitor through a $75.0-\mathrm{M} \Omega$ resistor to 90.0$\%$ of its final voltage.

cm
Charles Magnusen
Numerade Educator
01:06

Problem 74

Integrated Concepts
If you wish to take a picture of a bullet traveling at 500 m/s, then a very brief flash of light produced by an RC discharge through a flash tube can limit blurring. Assuming 1.00 mm of motion during one RC constant is acceptable, and given that the flash is driven by a $600-\mu F$ capacitor, what is the
resistance in the flash tube?

Ze-Han Lee
Ze-Han Lee
Numerade Educator
03:15

Problem 75

Integrated Concepts
A flashing lamp in a Christmas earring is based on an RC discharge of a capacitor through its resistance. The effective duration of the flash is 0.250 s, during which it produces an average 0.500 W from an average 3.00 V. (a) What energy does it dissipate? (b) How much charge moves through the lamp? (c) Find the capacitance. (d) What is the resistance of the lamp?

cm
Charles Magnusen
Numerade Educator
02:57

Problem 76

Integrated Concepts
A $160-\mu F$ capacitor charged to 450$\vee$ is discharged through a $31.2-\mathrm{k} \Omega$ resistor. (a) Find the time constant. (b) Calculate the temperature increase of the resistor, given that its mass is 2.50 $\mathrm{g}$ and its specific heat is 1.67$\frac{\mathrm{kJ}}{\mathrm{kg} \cdot^{\circ} \mathrm{C}}$ noting that most of the thermal energy is retained in the short time of the discharge. (c) Calculate the new resistance, nassuming it is pure carbon. (d) Does this change in resistance seem significant?

Ze-Han Lee
Ze-Han Lee
Numerade Educator
01:43

Problem 77

Unreasonable Results
(a) Calculate the capacitance needed to get an $R C$ time constant of $1.00 \times 10^{3}$ s with a $0.100-\Omega$ resistor. (b) What is unreasonable about this result? (c) Which assumptions are responsible?

cm
Charles Magnusen
Numerade Educator
05:27

Problem 78

Construct Your Own Problem
Consider a camera’s flash unit. Construct a problem in which
you calculate the size of the capacitor that stores energy for the flash lamp. Among the things to be considered are the voltage applied to the capacitor, the energy needed in the flash and the associated charge needed on the capacitor, the resistance of the flash lamp during discharge, and the desired RC time constant.

Mutahar Mehkri
Mutahar Mehkri
Numerade Educator
04:01

Problem 79

Construct Your Own Problem
Consider a rechargeable lithium cell that is to be used to power a camcorder. Construct a problem in which you calculate the internal resistance of the cell during normal operation. Also, calculate the minimum voltage output of a battery charger to be used to recharge your lithium cell. Among the things to be considered are the emf and useful terminal voltage of a lithium cell and the current it should be able to supply to a camcorder.

Ren Jie Tuieng
Ren Jie Tuieng
Numerade Educator